Jump to content
  • Forum Statistics

    3,734
    Total Topics
    30,902
    Total Posts
  • Member Statistics

    101,828
    Total Members
    16,800
    Most Online
    rsaalfrank
    Newest Member
    rsaalfrank
    Joined

Tzeunis

Members
  • Content count

    6
  • Joined

  • Last visited

  1. Check your fan settings on motherboard; it happens when in silent mode. Put it to 40% and it ois gone.
  2. Well Guys, broken psu and motherboard. What are the odds... now running fine but have an airbubble sound ik my Floe Riing 360... See other post...
  3. Floe Riing 360 Premium

    Installed this cooler yesterday and it is making a lot of noise; sounds like air in the loop to me. I bought the Core P3 and installed the cooler like the pictures and then the noise start at poweron and continues. When i place the case horizontally, the noise is gone. Any idea's? Thanks! This is my case!
  4. thermaltake floe ring pump issue

    I have the same; it is position depending. Is your cooler mounted like the Core P3 inmages? Try placing your case horizontally: then it is away. It is the little bit of air in the loop... Can't stand it; bought the whole Thermaltake stuff: case, PSU, 360 premium. PSU dead on arrival and now this... Contacting the premium store on 30th
  5. Hi Darren, I have a power button like that. It is lit up. All leds on the motherboard flash short and then turn when switching the button on the psu. After 20 seconds the rgb memory is also lit up, but no joy when pressing the power button. It is my 4th build, so I am no newby. CPU is installed correctly by aligning en pressing with lever. I need to say that when i looked to my 24atx cable on one pin there is a bend edge. Maybe that is causing a problem... Going to de-assemble my build and test the main board on the cardboard box... Is there a way to test de psu without the motherboard and cpu?
  6. Hi all, just finished my new build, plugging in the power cord, but no joy. On de MB (Gigabyte Z370 Gaming 7) the power button on de MB is on and the memory is flashing RGB. But I cannot boot... is it normal the the fan of RGB lighting doesn’t work when the power switch if flipped on the power supply? Thanks for your input.
×