Rakesh Sharma

Thanks a lot Sir.

Video links :

FINAL UPDATE : 16-JAN-2017 After about three months of planning and building, finally my “Huffer†build completed. For me participating in 2016 Thermaltake CaseMOD Invitational Season 2 is great honor and making this build was real fun. Like to thanks Thermaltake team, forum members and all of you how showed your interest and appreciation for my build. https://youtu.be/cIdEAP_YtHE Video link : THANK YOU Regards, Rakesh Sharma INDIA

UPDATE : 02-Jan-2017 Now build is about to finish. Little video of filling the loop with coolant. Testing system with Operating System and driver packages installation. Some more final tweaks and system will be ready for gaming action.

UPDATE : 26-Dec-2016 Now started adding details to the build. Hand cutting the printouts and applying paint, trying to give some rough look.

UPDATE : 22-Dec-2016 Coolant is here. Will be filling the loop soon, but first have to flush the whole loop with Distilled water.

UPDATE : 20-Dec-2016 At last PETG tubes installation done. It was easy and perfect. Yellow transparent side panels cut down to proper dimensions, look great. Still cutting marks are visible on side and edges, will be polishing for proper finish.

UPDATE : 17-Dec-2016 Making of liquid channel plate from sheets of acrylic. Cutting, drilling and then threading holes for compression fitting installation. Now water channel is cut out from a 12mm thick acrylic sheet and everything is fused together with acrylic cement and installed inside the case.

Thanks and Merry Christmas to you and your family.

UPDATE : 15-Dec-2016 Final tool needed for this build is here, the G1/4 tap.

UPDATE : 12-Dec-2016 Slowly pushing the build towards its completion. Installing VGA water block on both graphic cards. Test fitting, everything looks nice so fare.

UPDATE : 07-Dec-2016 Front analog control panel part done. Everything working fine. RPM meter is displaying fan RPM. Under 5000 RPM meter displays accurate fan RPM, but above that it starts showing higher values of RPM.. some fine tuning in Arduino code will solve the issue. https://youtu.be/dGreX0gL20c

UPDATE : 5-Dec-2016 Full Sunday working… from printer scrap parts to fully working top-air flap transition done successfully., just slight fine-tuning required. https://youtu.be/f-fcIrrcoE8

UPDATE : 03-Dec-2016 Build progress on full speed. Working on finishing the top air flaps. LDC controller and micro-controller boards installed working on wiring and connection layout. Hope to finish top panel wiring soon.

Thanks

UPDATE : 29-Nov-2016 Full testing of all hardware before staring Liquid Cooling thing. And everything seems to be fine here.

UPDATE : 28-Nov-2016 80 % paint job done. Test fitting some parts. Now working on final paint job, trying to give old and retro looks.

Thanks Jos214demi

UPDATE : 22-Nov-2016 Slow and steady build under progress. Making mounting brackets for servo motors with LCD mounting in the top air inlet flap and little sneak peak on paint job.

UPDATE : 19-Nov-2016 Working on automatic top air inlet flap and exhaust flap. Also finally wheels arrived.

Yeep ....all will be working accordingly

UPDATE : 14-Nov-2016 More packages arrived with lot of goodies. Working on the Gauge panel of the bulid.. Doing some wiring.

UPDATE : 12-Nov-2016 Moisture proof coating applied, one more sanding and shell is ready for primer. Cutting top panel for air inlet doors

UPDATE : 9-Nov-2016 Somewhat basic shell is ready. Now first filling of all joints and edges. http://www.pctekreviews.com/Modding/Huffer/063jpg Sanding down all the joints and rough sides, forming curved edges. Now will be doing a second fill and fine sanding before first primer layer.

UPDATE : 7-Nov-2016 Boards for the build is here, now Saturday night will be a great fun. Cutting, drilling and assembling of MDF forming rough Air starter outer shell. All hand tools, no power tools here..