[Need longer ATX 24-Pin power connector cable with Core X71?]

20 hours ago, ThermalMike said:

Hi,

If using the PSU in the bottom chamber, it will not reach to the point of what you would like and I would suggest getting some extensions for both looks and the length so you can have much better cable management for a build with this chassis. That is what I did on the couple I have made so far

So if you put an ATX motherboard in this case, and place a standard PSU in the lower chamber (as you're supposed to, as not much else useful will go down there (LED fans do not count as useful)), the PSU cabling won't reach the motherboard?

What genius made this case? 

[Need longer ATX 24-Pin power connector cable with Core X71?]

If I put a power supply in the in the lower chamber, does a power supply's standard ATX 24-Pin power connector cable actually reach the slot on the motherboard?

[Need PSU Shroud for Suppressor F51]

On 14/03/2017 at 7:44 AM, JunkaDK said:

Hey all,

I am seeking a PSU shroud for my Suppressor F51 case. I can not find it for sale anywhere? Can anyone help me out? I will pay for it + shipping from ANYWHERE if its in good condition

Thanks.

Need it for this beauty as you can see (see attached)

<photo snipped>

Did you find one?

[F51/V51/V71 Tempered Glass Upgrade Kit UK reseller?]

Is the AC-052-ONONAN-C1 (fits the Suppressor F51, Core V51 and Core V71) still available?

If so, does anyone know a UK reseller?

[200mm fan locations on the Suppressor F51?]

Where can 200mm fans be used on the Suppressor F51 case?

It appears only one location: Front, at the bottom.

Can one be placed at the front, at the top? (where the optical drives would be)

[What is an ODD plate?]

Anyone?

[Which two fans come with the Suppressor F51?]

Which two fans come with the Suppressor F51?

 

I know the front 200mm one has "TT-2030" on it but what are its specifications? (CFM, dBA, is it PWM etc.)

 

What about the specifications of the rear one? (there is no information on the physical fan itself)

[What is an ODD plate?]

I recently posted the following on Thermaltake's Facebook Page:
 

I have a Thermaltake Suppressor F51 case.
 
It shipped with a 200mm front fan, mounted on the bottom half of the front.
 
I am looking to get an additional front fan.
 
The manual states the front of the case supports 3x 120mm, 2x 140mm or 1x 200mm.
 
If I choose to keep the 200mm in there, can I add a second front fan?
 
If not, I guess I'll remove the 200mm fan and get 2x 140mm fans.

 
Their reply:
 

If you want to mount a 200mm fan in the front, you will only be allowed to install either a 120mm or 140mm fan. However, you will need to install a ODD plate in the front as well as remove a 5.25" drive bay.

 
I have an ODD plate on the way.
 
What will it allow me to do?
 
I presume mount a 120mm/140mm fan above the included 200mm fan? (as long as the 5.25" drive bays are removed, of course).

 

If so, does that mean that, without an ODD fan, the case only supports a single fan on the front and that's all? If so, how basic!