[ThpoughPower dps 1050 burned...]

@Denny,, thanks for reply  i was a little too unspecific, i used the EPS  cable (plug) comming from the motherboard and plugged it into the PCIE jack in the PSU ( did this because i was too lazy to kneel down ).

The result was a immediate fuse blow of the house wiring.

Next I removed the EPS  cable from the psu and plugged it into the right psu slot  but damge was done...

I disasembled the powersupply and found the thermistor broken....  and i thing one more diode it damge , too  because it has no resistance anymore..

[ThpoughPower dps 1050 burned...]

Hi thx for reply  its a gold rated psu,, i ordered a ntc 7.5 amps 6 ohm hope that will work out if nothing else is broken.....

BTW is there a exploded chart available or a  wire plan?

[ThpoughPower dps 1050 burned...]

Hi, and hello to the comunity. I am looking for some help regarding to a broken tough power dps 1050   ,240 V  version.

Unfortunately i connected the EPS 12 volt connector for the MB to a PCIE port of the powersupply resulting in a immediate fuse blow. I opened the powersupply and found  the RL1 condensator ( the big blue one besides the coill) burned. Is there anyone who can help me with the parts number  or a repair kit for a broken 12 v in /out put rail?

 

For anyone who wants to know  i checkd the motherboard with a different power supply and it seems ok  so no components got damaged by applying - 12V to + 12V line... guess i just was lucky...

 

 

Thanks for helping to find the  parts.....

 

 

Found it SCK 058 or any npc 5 ohm and 7.5 to 8 amps....