TT Amanda

💠 2024 Thermaltake RAM MOD Invitational Season 1 💠
Event Predictions Voting

 
2024 Thermaltake RAM MOD Invitational Season 1_Event Predictions Voting starts today!
⬆️ Predict on the poll above who will win the event for your chance to win a 🎁Argent H5 Stereo Gaming Headset and a 🎁Toughpower GF1 1000W. 
👉 Event Website: https://rammod.thermaltake.com/2024/
Prediction Voting Event will run from August 12th 2024 to September 6th 2024. (GMT+8)    

💠 2024 Thermaltake RAM MOD Invitational Season 1 💠
Event Predictions Voting

 
2024 Thermaltake RAM MOD Invitational Season 1_Event Predictions Voting starts today!
⬆️ Predict on the poll above who will win the event for your chance to win a 🎁Argent H5 Stereo Gaming Headset and a 🎁Toughpower GF1 1000W. 
👉 Event Website: https://rammod.thermaltake.com/2024/
Prediction Voting Event will run from August 12th 2024 to September 6th 2024. (GMT+8)    

💠 2024 Thermaltake RAM MOD Invitational Season 1 💠
Event Predictions Voting

 
2024 Thermaltake RAM MOD Invitational Season 1_Event Predictions Voting starts today!
⬆️ Predict on the poll above who will win the event for your chance to win a 🎁Argent H5 Stereo Gaming Headset and a 🎁Toughpower GF1 1000W. 
👉 Event Website: https://rammod.thermaltake.com/2024/
Prediction Voting Event will run from August 12th 2024 to September 6th 2024. (GMT+8)    

💠 2024 Thermaltake RAM MOD Invitational Season 1 💠


Taipei, Taiwan－August 6th, 2024－Thermaltake, a leading PC DIY brand for premium hardware solutions, kicked off the “2024 Thermaltake RAM MOD Invitational” an annual competition that gathers modders from all corners of the world to mod the designated Thermaltake ram into their own masterpiece. This year we invited six modders from Austria, Italy, Japan, Thailand, and the United Kingdom to modify the TOUGHRAM XG RGB D5 Memory DDR5.
 
Participating modders are given a specific time frame to modify the RAM heatsinks, without changing the overall appearance and layout of the RAM itself. Contestants must only use our TOUGHRAM XG RGB D5 modules and cannot add the ram to a motherboard or a PC build. However, they can create a stand or platform for the modules but the overall modules must remain intact with the original design as the main focus.
 
Contestants will compete for the top three positions for a total cash prize pool of $5,000 US dollars, and will be graded by their originality, design concept, final photos, and their video quality. If the contestant built a stand for the ram, the modder would need to show both with stand and without stand photos and videos.   
 
Grading will be done by the Thermaltake judges and the TT CEO, and also carefully selected professional modders. Tt community members will also contribute to 30% of the final scores for each contestant. So, don’t miss out on the chance to win some amazing prizes (including the TOUGHRAM XG RGB Memory DDR4, View 270 TG ARGB Matcha Green Mid Tower Chassis and more) during the prediction giveaway event and the final giveaway event by joining the Tt community and showing your support for your favorite RAM mod!
 
📢 Event Website: https://rammod.thermaltake.com/2024/
🔎 More information of TOUGHRAM XG: https://bit.ly/3IIVZdt

Thermaltake Announces The Tower 200 Mini Chassis
Capable with 4090 GPUs
Tiny but Mighty

Taipei, Taiwan－May 18th, 2023－Thermaltake, the leading PC DIY premium brand for Case, Power, Cooling, Gaming peripherals, and enthusiast Memory solutions, is proud to release The Tower 200 Mini Chassis, an exclusive mini-ITX case that can accommodate a 4090 graphics card and a 280mm AIO radiator. As a compact chassis, The Tower 200 not only has the advantage of saving space but also without sacrificing high-end hardware support. To maintain its panoramic view and thermal performance, The Tower 200 keeps its front TG panel, and changed both left and right sides to perforated panels, whilst featuring two 140mm CT140 fans for better cooling performance. The Tower 200 is a mighty mini-ITX case that meets your needs in appearance and performance.
The Tower 200 retains the iconic vertical body design of its predecessors, providing flexibility and decreasing obstructions to your gaming and workspace with a smaller footprint. The well-designed airflow of The Tower 200 eliminates common concerns about cooling performance of a mini-ITX chassis. The cold air intakes from the left, right and bottom side as well as the hot air exhausts at the top side and rear sides keep the internal temperature low at all times. In addition to one pre-installed CT140 140mm PC Cooling Fan on the top and other one on the back, The Tower 200 allows users to build an exceptional cooling system by installing different components. On the right side, The Tower 200 can support up to either two 120/140mm fans or a 280mm AIO radiator. Besides, the removable fan bracket makes the installation process easier, and the removable fan filters ensure excellent dust protection.
Although The Tower 200 is a mini-ITX chassis, it is still optimized for good hardware support. The Tower 200 can accommodate a CPU cooler with a height of up to 200mm, a GPU with a length of up to 380mm, and a power supply with a length of up to 220mm. The capacity of The Tower 200 is available for a 4090 GPU and a standard-size PSU, allowing users to build up a dream PC with the latest generation of high-end components. Additionally, The Tower 200 features a GPU stabilizer to prevent the GPU from wobbling during use or transport. The I/O Ports come with two USB 3.0, one USB 3.2 Gen 2 Type C, and one HD Audio, providing direct access when needed. On top of that, if you want to upgrade the visual effect of The Tower 200, there is a 3.9” TFT-LCD panel kit is sold separately. The LCD can display components’ real-time information, time mode, and weather mode, and even can upload any images or GIFs by using the TT RGB Plus 2.0 software.
As a new addition to The Tower series, The Tower 200 is a mini-ITX case with a vertical body design, has well-designed thermal performance, and features that can support up to a 4090 graphics card and a 280mm radiator. The Tower 200 is a tiny but mighty chassis, suitable for those who would like to achieve both compact size and effective performance.
🟦 Features of The Tower 200 Mini Tower Chassis:  
Classic Vertical Body Design
Supports Up To A 280mm Radiator On The Right
Two CT140 PC Cooling Fans Pre-installed
Choose the way you install
Well-Designed Air Intake and Exhaust
Perfect Dust Protection
Hardware Support and Cooling Solution
Handy I/O Ports
Dismantlable Modular Design
 
👉The Tower 200:
 
👉The Tower 200 Thermal Testing:





 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
🔸Press Release: https://www.thermaltake.com/news/view/index?id=1206
🔸The Tower 200 Product Websites:
The Tower 200: https://www.thermaltake.com/the-tower-200-mini-chassis.html 
The Tower 200 Snow: https://www.thermaltake.com/the-tower-200-snow-mini-chassis.html
🔸The Tower 200: TT Premium USA | TT Premium Europe | TT Premium Australia | TT Premium Asia
🔸The Tower 200 Snow: TT Premium USA | TT Premium Europe | TT Premium Australia | TT Premium Asia
 
✨Multiple Colors Version coming soon!!!
 

Thermaltake Ceres 300 TG ARGB Mid Tower Chassis Now Available for Purchase
 
Taipei, Taiwan－June 7th, 2023－Thermaltake, the leading PC DIY premium brand for Case, Power, Cooling, Gaming peripherals, and enthusiast Memory solutions, is pleased to announce the launch of Ceres 300 TG ARGB and Ceres 300 TG ARGB Snow, the latest ATX case in the Ceres lineup. These cases feature the perforated panels of the Ceres range, with more than 55% of the Ceres 300’s panels perforated to provide optimal cooling. In addition, the Ceres 300 can support up to a 360/280mm AIO radiator at the front and a 280mm AIO radiator at the top. On top of that, the cases feature three pre-installed CT140 PC Cooling fans at the front and rear also, to help support the Ceres 300’s outstanding cooling potential.
To achieve optimal airflow for cooling the latest graphics cards and CPUs, the Ceres 300 features more than 55% perforated panels to provide a large amount of air intake and exhaust. The Ceres 300 offers a wide variety of cooling installation options. Besides being equipped with two pre-installed CT140 ARGB Sync PC Cooling Fans at the front and one pre-installed CT140 PC Cooling Fan pre-installed at the rear, the Ceres 300 can support up to seven 120mm or five 140mm fans in the chassis, up to one 360mm AIO radiator at the front, and up to one 280mm radiator at the top. What’s more, the LEDs of the pre-installed CT140 ARGB Sync PC Cooling Fans can be controlled by motherboard software from ASUS, GIGABYTE, MSI, and ASRock, allowing for fully customizable RGB lighting while enjoying the superior cooling performance of the Ceres 300. Through the 4mm tempered glass panel on the left side, users can fully show off all hardware in all their RGB glory.
The Ceres 300 provides great support for high-end hardware expandability. It can accommodate a CPU cooler with a maximum height of 185mm, GPU placement of up to 370mm in length, and a power supply of up to 220mm in length. Additionally, there are rotational PCI-E slots inside the Ceres 300, allowing for the display of graphics cards either horizontally or vertically. For maintaining the components, the removable filters at the top, front, bottom, left, and right sides of the Ceres 300 not only provide excellent dust protection but can also be easily removed for cleaning. To provide direct access when required, two USB 3.0, one USB 3.2 Gen 2 Type C, and HD Audio ports are placed on the side of the front panel. Furthermore, there is a 3.9" TFT-LCD panel kit that is available for purchase separately for those who wish to upgrade the Ceres 300. The LCD can display components’ real-time information, time mode, and weather mode, and even can upload any images or GIFs by using the TT RGB Plus 2.0 software.
With more than 55% of the panels perforated, supporting up to a 360/280mm AIO radiator, three CT140 PC Cooling fans pre-installed, The Ceres 300 is an ATX case for those who are looking for a chassis with amazing cooling performance.
 
⭐ Features of Ceres 300 TG ARGB Mid Tower Chassis:
Built for Massive Airflow
Supports up to a 360mm Radiator at the Front and a 280mm at the Top
Two CT140 ARGB Sync PC Cooling Fans and One CT140 PC Cooling Fan Pre-installed
Support for an upgraded LCD panel kit
4mm Tempered Glass Side Panel
Display Graphics Card Your Way
Well-Designed Air Intake and Exhaust
Perfect Dust Protection
Opportunities For High-End Expansion
Handy I/O Ports
 
👉Ceres 300 First Look:
 
👉Ceres 300 Thermal Testing:
 


 
 



🔸Press Release: https://www.thermaltake.com/news/view/index?id=1223
🔸Ceres 300 TG ARGB Product Websites:
Ceres 300 TG ARGB: https://www.thermaltake.com/ceres-300-tg-argb-mid-tower-chassis.html 
Ceres 300 TG ARGB Snow: https://www.thermaltake.com/ceres-300-tg-argb-snow-mid-tower-chassis.html 
🔸Ceres 300 TG ARGB: TT Premium USA | TT Premium Europe | TT Premium Australia | TT Premium Asia
🔸Ceres 300 TG ARGB Snow: TT Premium USA | TT Premium Europe | TT Premium Australia | TT Premium Asia
 
💚Matcha Green Version coming soon!!!

Thermaltake Unveils the CTE E600 MX Mid Tower Chassis with Three-Way GPU Installation Support
Centralized Thermal Efficiency

Las Vegas, United States－January 8th, 2024－Thermaltake, a leading PC DIY brand for premium hardware solutions, is thrilled to announce the launch of the CTE E600 MX Mid Tower Chassis, available in black, snow, and hydrangea blue versions. The CTE E600 MX is a new addition to the CTE series, a dual chamber mid-tower case inheriting Thermaltake’s innovative CTE Form Factor design, which stands for Centralized Thermal Efficiency and focuses on delivering high-level thermal performance to critical components. On top of that, the CTE E600 MX comes with a three-way GPU installation option and an interchangeable dual front panel design, giving users maximum flexibility to customize their setup.
 
To offer customization beyond its predecessors, the CTE E600 MX features a three-way GPU installation option, allowing you to design your component installation based on your preference.
Three-Way GPU Installation (PCI-e 4.0 Riser Cable and Floating GPU Bracket Included)
1️⃣ Floating GPU: Placing the GPU in the middle of the chassis by using the enclosed floating GPU bracket and pre-configured 400mm long PCI-e 4.0 riser cable
2️⃣ Up Right: Hanging the GPU vertically
3️⃣ Up Right Forward: Placing it up-right with the graphics card facing forward to the side panel on the rotational PCI-e slots
 
Furthermore, the CTE E600 MX comes with two interchangeable front panels in one package for you to swap anytime. One is a tempered glass panel, with crystal clear glass combined with a TG panel on the left side, providing an ultra-wide viewing angle to fully display your internal configuration; the other is a perforated panel which is designed for those who pursue superior airflow.
 
The dual chamber design of the CTE E600 MX separates the right chamber specifically for cable management. With Velcro straps and cable ties in the accessory box, users can easily tie things up on the numerous anchor points located in the right chamber for better cable management. The huge and clean space of the left chamber allows for tidier component placement and improves the airflow. Additionally, the CTE E600 MX can accommodate up to twelve 140mm fans plus two 120mm fans or support up to a 420mm radiator at the front, rear, or motherboard side, offering an exceptional cooling solution. Equipped with removable dust filters on all ventilation, this chassis can prevent thermal issues caused by dust alerts.   
The CTE E600 MX, a new member of the CTE series, brings not only an optimal cooling performance to critical components, but also a new three-way GPU installation and an interchangeable dual front panel design. With the classic CTE Form Factor and tremendous installation flexibility, the CTE E600 MX keeps it cool and keeps it sleek!
 
⭐ Features of CTE E600 MX Mid Tower Chassis:
CTE Form Factor
Move Critical Heat Sources (CPU And Graphic Cards) Closer Towards Cool Air
Three-Way GPU Installation
Include PCI-e 4.0 Riser Cable 400mm and Floating GPU Bracket
Dual Interchangeable Front Panels
All Your Dream Cooling Components Can Fit!
Support up to Twelve 140mm Fans, Fourteen 120mm Fans, or 420mm radiators
Dual Chamber Design Achieve Optimal Cable Management
Perfect Dust Protection
Handy I/O Ports
 
👉CTE E600 MX First Look:
 
👉CTE E600 MX Thermal Testing:
 
👉CTE E600 MX First Look:
 



 




                                              📷 Credit to JCustom
 
📰 Press Release: https://www.thermaltake.com/news/view/index?id=1274
🌐 Product Websites: 
      🔸CTE E600 MX: https://www.thermaltake.com/cte-e600-mx-mid-tower-chassis.html 
      🔸CTE E600 MX Snow: https://www.thermaltake.com/cte-e600-mx-snow-mid-tower-chassis.html 
      🔸CTE E600 MX Hydrangea Blue: https://www.thermaltake.com/cte-e600-mx-hydrangea-blue-mid-tower-chassis.html   
🛒 Where to Buy:
     🔸CTE E600 MX: TT Premium USA | TT Premium Europe | TT Premium Australia | TT Premium Asia
     🔸CTE E600 MX Snow: TT Premium USA | TT Premium Europe | TT Premium Australia | TT Premium Asia      
     🔸CTE E600 MX Hydrangea Blue: TT Premium USA | TT Premium Europe | TT Premium Australia | TT Premium Asia

2023 Thermaltake CaseMOD Invitational Season 1
🏆 Winner Announcement 🏆

🥇 Wael Kadri from France

 
🥈 Maulik Patel from India

 
🥉 Derek Wilson from Canada 

 
🥉 Ponsarud Romvilast from Thailand

 
The 2023 Thermaltake CaseMOD Invitational Season 1 has come to a close. Thermaltake would like to express our gratitude to all the participants including the public, modding enthusiasts, judges, and especially our sponsors: Intel, ASRock, INNO3D, and Seagate. Their invaluable support was crucial to the event's success. In the end, Thermaltake would like to congratulate the top three winners, and hope to see you all soon at the upcoming events!✨
 
🌐 Event Website: https://casemod.thermaltake.com/2023s1/ 

2023 Thermaltake CaseMOD Invitational Season 1
🏆 Winner Announcement 🏆

🥇 Wael Kadri from France

 
🥈 Maulik Patel from India

 
🥉 Derek Wilson from Canada 

 
🥉 Ponsarud Romvilast from Thailand

 
The 2023 Thermaltake CaseMOD Invitational Season 1 has come to a close. Thermaltake would like to express our gratitude to all the participants including the public, modding enthusiasts, judges, and especially our sponsors: Intel, ASRock, INNO3D, and Seagate. Their invaluable support was crucial to the event's success. In the end, Thermaltake would like to congratulate the top three winners, and hope to see you all soon at the upcoming events!✨
 
🌐 Event Website: https://casemod.thermaltake.com/2023s1/ 

2023 Thermaltake CaseMOD Invitational Season 1
🏆 Winner Announcement 🏆

🥇 Wael Kadri from France

 
🥈 Maulik Patel from India

 
🥉 Derek Wilson from Canada 

 
🥉 Ponsarud Romvilast from Thailand

 
The 2023 Thermaltake CaseMOD Invitational Season 1 has come to a close. Thermaltake would like to express our gratitude to all the participants including the public, modding enthusiasts, judges, and especially our sponsors: Intel, ASRock, INNO3D, and Seagate. Their invaluable support was crucial to the event's success. In the end, Thermaltake would like to congratulate the top three winners, and hope to see you all soon at the upcoming events!✨
 
🌐 Event Website: https://casemod.thermaltake.com/2023s1/ 

2023 Thermaltake CaseMOD Invitational Season 1
🏆 Winner Announcement 🏆

🥇 Wael Kadri from France

 
🥈 Maulik Patel from India

 
🥉 Derek Wilson from Canada 

 
🥉 Ponsarud Romvilast from Thailand

 
The 2023 Thermaltake CaseMOD Invitational Season 1 has come to a close. Thermaltake would like to express our gratitude to all the participants including the public, modding enthusiasts, judges, and especially our sponsors: Intel, ASRock, INNO3D, and Seagate. Their invaluable support was crucial to the event's success. In the end, Thermaltake would like to congratulate the top three winners, and hope to see you all soon at the upcoming events!✨
 
🌐 Event Website: https://casemod.thermaltake.com/2023s1/ 

2023 Thermaltake CaseMOD Invitational Season 1

Vote Now  
📢 Vote date: 31th January 2024 ➡ 14th February 2024 (GMT+8)
Vote for your favorite mod on the poll to be included in our giveaway draw!
🎁 Prizes:
CTE C750 Air Full Tower Chassis
TOUGHRAM XG RGB D5 Memory DDR5 6000MT/s 32GB (16GB x2)
🎆 Mods: (click links to see more photos)
👉 [Canada] Derek Wilson

 
👉 [China] Bai Lin

 
👉 [France] Wael Kadri

 
👉 [India] Maulik Patel

 
👉 [Italy] Marco Di Silvestre

 
👉 [South Korea] Seung Jae Lee

 
👉 [Thailand] Ponsarud Romvilast

 
👉 [USA] Timmy Parker

 
🌐 Event Website: https://casemod.thermaltake.com/2023s1/ 
📽️ Video: 
 
📱 Tt MOD app: 
Google Play: https://bit.ly/3gvn6Nj
App Store: https://apple.co/3iRHNon

2023 Thermaltake CaseMOD Invitational Season 1

Vote Now  
📢 Vote date: 31th January 2024 ➡ 14th February 2024 (GMT+8)
Vote for your favorite mod on the poll to be included in our giveaway draw!
🎁 Prizes:
CTE C750 Air Full Tower Chassis
TOUGHRAM XG RGB D5 Memory DDR5 6000MT/s 32GB (16GB x2)
🎆 Mods: (click links to see more photos)
👉 [Canada] Derek Wilson

 
👉 [China] Bai Lin

 
👉 [France] Wael Kadri

 
👉 [India] Maulik Patel

 
👉 [Italy] Marco Di Silvestre

 
👉 [South Korea] Seung Jae Lee

 
👉 [Thailand] Ponsarud Romvilast

 
👉 [USA] Timmy Parker

 
🌐 Event Website: https://casemod.thermaltake.com/2023s1/ 
📽️ Video: 
 
📱 Tt MOD app: 
Google Play: https://bit.ly/3gvn6Nj
App Store: https://apple.co/3iRHNon

2023 Thermaltake CaseMOD Invitational Season 1

Vote Now  
📢 Vote date: 31th January 2024 ➡ 14th February 2024 (GMT+8)
Vote for your favorite mod on the poll to be included in our giveaway draw!
🎁 Prizes:
CTE C750 Air Full Tower Chassis
TOUGHRAM XG RGB D5 Memory DDR5 6000MT/s 32GB (16GB x2)
🎆 Mods: (click links to see more photos)
👉 [Canada] Derek Wilson

 
👉 [China] Bai Lin

 
👉 [France] Wael Kadri

 
👉 [India] Maulik Patel

 
👉 [Italy] Marco Di Silvestre

 
👉 [South Korea] Seung Jae Lee

 
👉 [Thailand] Ponsarud Romvilast

 
👉 [USA] Timmy Parker

 
🌐 Event Website: https://casemod.thermaltake.com/2023s1/ 
📽️ Video: 
 
📱 Tt MOD app: 
Google Play: https://bit.ly/3gvn6Nj
App Store: https://apple.co/3iRHNon

2023 Thermaltake CaseMOD Invitational Season 1
⌛ Date Extension Announcement⏳

Thermaltake would like to extend the event period due to unforeseen circumstances.
Due day for modders will change from January 5 to January 12, 2024
The following voting event will also be postponed accordingly. 
Thank you for your understanding!
 
 
🔸More event information:  https://casemod.thermaltake.com/2023s1/
🔸Tt MOD app
Google Play: https://bit.ly/3gvn6Nj
App Store: https://apple.co/3iRHNon
 

2023 Thermaltake CaseMOD Invitational Season 1
⌛ Date Extension Announcement⏳

Thermaltake would like to extend the event period due to unforeseen circumstances.
Due day for modders will change from January 5 to January 12, 2024
The following voting event will also be postponed accordingly. 
Thank you for your understanding!
 
 
🔸More event information:  https://casemod.thermaltake.com/2023s1/
🔸Tt MOD app
Google Play: https://bit.ly/3gvn6Nj
App Store: https://apple.co/3iRHNon
 

👉 2023 Thermaltake CaseMOD Invitational Season 1 has started!
🎁 Vote for your top pick to get involved in the giveaway draws. 
 
TH240 V2 ARGB Sync All-In-One Liquid Cooler: https://bit.ly/3FwjxCl

Argent H5 Stereo Gaming Headset: https://bit.ly/406OFA5

Prediction Voting Event runs from October 30th to November 27th, 2023. (GMT+8) 
* Kindly submit your vote on the Poll Section, comments will not be counted!
 
🔸 More event information:  https://casemod.thermaltake.com/2023s1/ 
🔸 Video: https://youtu.be/3NAuMZCxFJw   
🔸 Tt MOD app
Google Play: https://bit.ly/3gvn6Nj
App Store: https://apple.co/3iRHNon

👉 2023 Thermaltake CaseMOD Invitational Season 1 has started!
🎁 Vote for your top pick to get involved in the giveaway draws. 
 
TH240 V2 ARGB Sync All-In-One Liquid Cooler: https://bit.ly/3FwjxCl

Argent H5 Stereo Gaming Headset: https://bit.ly/406OFA5

Prediction Voting Event runs from October 30th to November 27th, 2023. (GMT+8) 
* Kindly submit your vote on the Poll Section, comments will not be counted!
 
🔸 More event information:  https://casemod.thermaltake.com/2023s1/ 
🔸 Video: https://youtu.be/3NAuMZCxFJw   
🔸 Tt MOD app
Google Play: https://bit.ly/3gvn6Nj
App Store: https://apple.co/3iRHNon

👉 2023 Thermaltake CaseMOD Invitational Season 1 has started!
🎁 Vote for your top pick to get involved in the giveaway draws. 
 
TH240 V2 ARGB Sync All-In-One Liquid Cooler: https://bit.ly/3FwjxCl

Argent H5 Stereo Gaming Headset: https://bit.ly/406OFA5

Prediction Voting Event runs from October 30th to November 27th, 2023. (GMT+8) 
* Kindly submit your vote on the Poll Section, comments will not be counted!
 
🔸 More event information:  https://casemod.thermaltake.com/2023s1/ 
🔸 Video: https://youtu.be/3NAuMZCxFJw   
🔸 Tt MOD app
Google Play: https://bit.ly/3gvn6Nj
App Store: https://apple.co/3iRHNon

👉 2023 Thermaltake CaseMOD Invitational Season 1 has started!
🎁 Vote for your top pick to get involved in the giveaway draws. 
 
TH240 V2 ARGB Sync All-In-One Liquid Cooler: https://bit.ly/3FwjxCl

Argent H5 Stereo Gaming Headset: https://bit.ly/406OFA5

Prediction Voting Event runs from October 30th to November 27th, 2023. (GMT+8) 
* Kindly submit your vote on the Poll Section, comments will not be counted!
 
🔸 More event information:  https://casemod.thermaltake.com/2023s1/ 
🔸 Video: https://youtu.be/3NAuMZCxFJw   
🔸 Tt MOD app
Google Play: https://bit.ly/3gvn6Nj
App Store: https://apple.co/3iRHNon

👉 2023 Thermaltake CaseMOD Invitational Season 1 has started!
🎁 Vote for your top pick to get involved in the giveaway draws. 
SWAFAN EX12 ARGB Sync PC Cooling Fan TT Premium Edition (3-Fan Pack): https://bit.ly/48q8LuF

Toughpower PF1 1050W: https://bit.ly/3nUFLID

Pre Event Predictions will run from October 4th to October 29th, 2023. (GMT+8) 
* Kindly submit your vote on the Poll Section, comments will not be counted!
 
🔸 More event information:  https://casemod.thermaltake.com/2023s1/ 
 🔸 Video: https://youtu.be/3NAuMZCxFJw   
🔸 Tt MOD app
Google Play: https://bit.ly/3gvn6Nj
App Store: https://apple.co/3iRHNon