EddyKuz

Looks great !

The first custom cable sleeves are done. Many thanks to www.gosumodz.com, they helped me a great deal with the materials and tools I needed. 









This is a test for a "special" coolant  We'll see if this turns out as planned (and no, this is not Mayhems)

The tubes have been bent and I started with the tubing.

Here are the last tasks before I finish,

the covers for the screws are added and covered with white silicone.




The cables are hidden in a cable tunnel


Now I just need to add lighting and the tubes and wire the rest. After that, I need to make a few cable sleeves and then I will have finished this project already!

The tubes have been bent and I started with the tubing.

The first custom cable sleeves are done. Many thanks to www.gosumodz.com, they helped me a great deal with the materials and tools I needed. 









This is a test for a "special" coolant  We'll see if this turns out as planned (and no, this is not Mayhems)

My Vote for Eddy and Germany

My top pick is for the 2015 Thermaltake CaseMOD Invitational Season 2 is  Edgar Marckmann

Today I could finally continue.

The two 480 radiators have been aligned at the bottom of the second Core X9.



The next step was to mount the fans and start a test run.



I built a support frame out of wood to avoid pressure on the plexiglass during the drilling sessions.


I have marked the fan holes on the plexi glass and then cut them out with a drill press and a circle cutter.





The holes fit, now I just need to sand the edges and I am done.

Today I started working on the case.
 
I removed the back panel and mid braces of both cases.
The bottom of the top case also got a treatment because I want to run a lot of stuff through.
 
Then I prepared a backpanel of 1.5mm thick aluminium.
 
Thank good I always tidy up first 

 
Preparation for the back panel

 




 
And this is what's left when I am finished with the saw :=)

My vote Germany .

Edgar Marckmann is the best    
Thanks for the chance

Today I started working on the case.
 
I removed the back panel and mid braces of both cases.
The bottom of the top case also got a treatment because I want to run a lot of stuff through.
 
Then I prepared a backpanel of 1.5mm thick aluminium.
 
Thank good I always tidy up first 

 
Preparation for the back panel

 




 
And this is what's left when I am finished with the saw :=)

The Thermaltale Pacific reservoir is mounted onto an 8mm thick plexiglass plate.
 
Drilled M3 holes in all corners and used a tap and die to prepare the reservoir mounts.
 
 

Wuuhuuu, nice WORK

Vote for Edgar Marckmann (Eddy Kuz), Germany. I hope u'll be the winner

The Thermaltale Pacific reservoir is mounted onto an 8mm thick plexiglass plate.
 
Drilled M3 holes in all corners and used a tap and die to prepare the reservoir mounts.
 
 

My vote goes to Edgar Marckmann 

My vote for Eddy and German   done bro @sealrokubi heuheuhe

My vote for Eddy and German

My Vote Germany ! Viel Glück Eddy

My Vote for Eddy and Germany
Good Luck to all

Prediction Voting Event has begin!! 
 
Date: (September 1st ~ September 29th)
 
Post below who your top pick is for the 2015 Thermaltake CaseMOD Invitational Season 2 for your chance to win one of the listed prizes each week!! 
 
Weekly Prizes
1. Riing RGB 256 color 3 pack (2 Sets)
2. Thermaltake Smart DPS G 750W PSU
3. Water 3.0 Preformer
4. TteSPORTs ISURUS Pro Headset
5. Avexir Core Series Limited Thermaltake Edition
 Note: Prizes will be sent out at the end of the event

Edgar Markmann the best! I will bet for him, really like what he is doing. 

Congratulations!