Search the Community
Showing results for tags 'speed'.
Found 4 results
Hi there, I'm currently using the Floe Riing RGB 360 TT. All in all the AIO works fine, but I'm having trouble with the noise coming from the fans. They adjust their speed to the CPU temperature, which is - as far as I am informed - working as intended, but what bothers me is that they instantly jump from 700-800 RPM (nearly unhearable) to 1200+ in a second (tornado) when the CPU is under minimal load. They're staying there for a few seconds and then shifting into silent mode again, only to resart again a few moments after. This is a noise difference of, I would say, 10-15db every 10 seconds, which is quite annoying. I there any way to configure this AIO to gently "slide" to the final fan speed? Or maybe there is a minimum speed, so that the difference between the modes is not that big? The problem is that my system gets critically "undercooled" when I manually put the AIO to silent mode via software. The CPU overheats and the system crashes and restarts, especially while doing CPU-heavy stuff like Video Encoding.
Dear forum, it is my first entry here, so please dont blame me for any mistakes i make So, first of all, i own an NZXT S340 and i am planning to use the riing RGB fans as an intake. I am looking at buyng the 3-pack, because then i could mount two as an intake and i would have one spare fan left. So, if i want to put it on my CPU-heatsink, i would have to connect it to the splitter that is included, but then i couldnt control my CPU-fan individually, but if i connected it to the MB, i could change the speed without a problem, but how would the lighting react? Would there even be any light? I really dont wanna buy 3 individual fans / 3 pack +1 fan because it would be 20â‚¬ more expensive just to have one more small controller... Thanks for any help! Have a nice day ~ CheeZe
I've had a thermaltake Water 3.0 Extreme for just under a year, now, and it's been working perfectly for my AMD FX 8350, until I tried to use their included Fan Control software to create a custom speedcurve. I tried to alter the curve slightly so that the fans would go to 100% if my CPU reach 50 because it's designed to reach a maximum of 60 or so degrees. Now the fans will only ever run at maximum speed (2000rpm) or idle at 1000rpm. -I can change their behavior slightly - when I switch to the "extreme" profile in the software, they seem to run at 100% all the time. -If I switch to "manual" (but factory default, so normal), they only run at 100% whenever my CPU reaches 35 C, and then drop back down to 1000rpm. -If I switch to the "silent" profile, the fans stay at idle - presumably until my CPU gets really hot, but I'm unwilling to test that. I've tried restarting my system, resetting my bios, re-installing the software, checking the connections... I did send them a tech support request a few hours ago (at the time I didn't know these forums existed), but I have no way to update them on my slightly new information. Initially I'd had my 8350 overclocked to 4.6GHz (stable for nearly a year), but while trying to fix this issue, I reset the bios, but that didn't help, outside of making a pattern visible. -Here's a screenshot of the problem with the overclock (with notes): http://puu.sh/h7Npx/854d680655.jpg -Here's a screenshot while running at stock voltages (this CPU is under load the entire time in this one): http://puu.sh/h7YU3/9b158b1321.png It's as if the program forgot how to increase the speed gradually, making the fans run at "idle" or "max", and there's a threshold at certain temperatures, though the only one I've been able to observe is the one at 35 C under the normal profile. So basically my computer is usable - if I sacrifice the overclock I've had for months and am willing to deal with the computer alternating between silent and extremely loud ever few seconds. And yes, it's my only computer. Thanks for the help! (Running Windows 7, and open hardware monitor to monitor temps - normally) (Actually, the fans would only jump up to full speed if the CPU ever got to 35C. So I'd only have to deal with the constant alternating when working on a project or playing a game. If I was simply browsing or letting the computer idle, the fans would ramp up less often.)
For some reasons when I installed Windows 8.1 on my system and install the fan control software, the fan profiles that I set no longer have any effect on the speed of the fans. Is there anything that I can do that can fix this issue?