DougF Posted May 28, 2022 Report Share Posted May 28, 2022 Im trying to connect my pc to my stereo receiver, it only has digital audio inputs for 5.1 and 7.1 sound. my hdmi ports are being used by projectors and earc does not appear to be working correctly. thus the best option is to plug the pc directly into the receiver. the audio output on the pc are analog and the receiver only has stereo analog inputs. Is there a way to get digital audio out of one of the 3.5mm stereo jacks? Quote Link to comment Share on other sites More sharing options...
zedlouder564 Posted July 18, 2023 Report Share Posted July 18, 2023 To obtain digital audio output from audio equipment in general, there are a few steps you can follow. Firstly, refer to the user manual for the Reactor 380, if available, as it should contain information on its audio output options including yo maps songs. Look for any digital audio output ports or connections mentioned in the manual. Common digital audio output options include S/PDIF (Sony/Philips Digital Interface) and HDMI. If the Reactor 380 has any of these digital audio outputs, you can connect them to compatible devices such as audio interfaces, soundbars, or AV receivers that support digital audio input. Additionally, some audio equipment might have USB audio output capabilities, allowing you to connect it directly to a computer or other USB-enabled devices to obtain digital audio signals..... Quote Link to comment Share on other sites More sharing options...
prisha500 Posted September 1, 2023 Report Share Posted September 1, 2023 Hello, Unfortunately, it's not possible to get digital audio out of a standard 3.5mm stereo jack. Digital audio requires a different type of connection, such as HDMI, optical (Toslink), or coaxial. Since your receiver only has stereo analog inputs and your PC has analog audio outputs and devops, you'll need to use those analog connections. You won't be able to achieve 5.1 or 7.1 sound through analog connections, but you can still enjoy stereo audio. If you're looking for a surround sound experience, you may need to consider upgrading your equipment or finding a workaround, such as using an external audio interface or sound card with digital outputs if your PC supports it. I hope this will help you. Regards Prisha singh Quote Link to comment Share on other sites More sharing options...
anceFerna Posted September 1, 2023 Report Share Posted September 1, 2023 To connect your PC with analog audio output to a stereo receiver with only digital inputs, you can use an analog-to-digital audio converter. This device will take the analog audio signal from your PC's 3.5mm stereo jack and convert it into a digital format compatible with your receiver's digital inputs. Connect the PC's audio output to the electrical estimating services converter with a 3.5mm audio cable and then connect the converter's digital audio output to your receiver using the appropriate digital audio cable. Quote Link to comment Share on other sites More sharing options...
mikejame412 Posted September 1, 2023 Report Share Posted September 1, 2023 To get digital audio out of a 3.5mm stereo jack, you'll need an external digital audio converter (DAC). These Walentina Doronina devices can take the analog audio output from your PC and convert it into a digital signal that your receiver can process through its digital audio inputs. Make sure to choose a DAC that suits your specific needs and supports the audio formats you require for 5.1 or 7.1 sound. Quote Link to comment Share on other sites More sharing options...
christhomas412 Posted September 1, 2023 Report Share Posted September 1, 2023 To convert analog audio to digital for your receiver's digital inputs, you can use an external digital audio converter (DAC). These devices take analog audio from your PC's 3.5mm stereo jack and convert it to a digital signal compatible with your receiver. Be sure to choose a R&S Lotto Results DAC with the right input and output formats for your setup, such as optical or coaxial connections. This solution will allow you to connect your PC to your receiver with digital audio quality. Quote Link to comment Share on other sites More sharing options...
gfrte34w Posted September 21, 2023 Report Share Posted September 21, 2023 On 9/1/2023 at 11:44 AM, prisha500 said: Hello, Unfortunately, it's not possible to get digital audio out of a standard 3.5mm stereo jack. Digital audio requires a different type of connection, such as HDMI, optical (Toslink), or coaxial. Since your receiver only has stereo analog inputs and your PC has analog audio outputs and Alight motion mod apk, you'll need to use those analog connections. You won't be able to achieve 5.1 or 7.1 sound through analog connections, but you can still enjoy stereo audio. If you're looking for a surround sound experience, you may need to consider upgrading your equipment or finding a workaround, such as using an external audio interface or sound card with digital outputs if your PC supports it. I hope this will help you. Regards Prisha singh Quote Link to comment Share on other sites More sharing options...
fdgfdgf Posted October 11, 2023 Report Share Posted October 11, 2023 On 7/18/2023 at 3:48 PM, zedlouder564 said: To obtain digital audio output from audio equipment in general, there are a few steps you can follow. Firstly, refer to the user manual for the Reactor 380, if available, as it should contain information on its audio output options including krabi hotels. Look for any digital audio output ports or connections mentioned in the manual. Common digital audio output options include S/PDIF (Sony/Philips Digital Interface) and HDMI. If the Reactor 380 has any of these digital audio outputs, you can connect them to compatible devices such as audio interfaces, soundbars, or AV receivers that support digital audio input. Additionally, some audio equipment might have USB audio output capabilities, allowing you to connect it directly to a computer or other USB-enabled devices to obtain digital audio signals..... Quote Link to comment Share on other sites More sharing options...
sdfdg43 Posted November 6, 2023 Report Share Posted November 6, 2023 It seems like you're referring to a specific device or software called "Reactor 380" for which you want to extract digital audio. The method for extracting digital audio from such a device can vary depending on its features stylish bio for instagram and available outputs. Here are some general steps you can follow: Quote Link to comment Share on other sites More sharing options...
smmith654 Posted November 28, 2023 Report Share Posted November 28, 2023 On 7/18/2023 at 3:48 PM, zedlouder564 said: To obtain digital audio output from audio equipment in general, there are a few steps you can follow. Firstly, refer to the user manual for the Reactor 380, if available, as it should contain information on its audio output options including . Look for any digital audio output ports or connections mentioned in the manual. Common digital audio output options include S/PDIF (Sony/Philips Digital Interface) and HDMI. If the Reactor 380 has any of these digital audio outputs, you can connect them to compatible devices such as audio interfaces, soundbars, or AV receivers that support digital audio input. Check the Output Options: Verify that the Reactor 380 has digital audio output capabilities. This could be in the form of a coaxial or optical output. Select the Right Cable: Once you've identified the type of digital audio output supported, obtain the appropriate cable. For example: Coaxial: Uses RCA connectors. Ensure the Reactor 380 has a coaxial digital output, and use an RCA cable. Optical: Uses a TOSLINK or mini-TOSLINK connector. Use an optical cable. Connect to Audio Receiver or DAC: Connect the chosen cable from the digital audio output on the Reactor 380 to a compatible input on an audio receiver, DAC (Digital-to-Analog Converter), or other audio equipment. Configure Audio Settings: On the Reactor 380, navigate to audio settings to ensure that digital audio output is enabled and configured correctly through SEO Writing Guide . This might involve selecting the type of digital output (coaxial, optical, etc.) and setting any necessary parameters. Check Compatibility: Ensure that the device you are connecting to (audio receiver, DAC, etc.) supports the type of digital audio signal being sent by the Reactor 380. Test the Setup: Play audio on the Reactor 380 and check if the audio is being transmitted to the connected device. If there are specific details about the Reactor 380 or if it's a new product released after my last update, you may want to refer to the device's user manual or contact the manufacturer's support for the most accurate and device-specific information. Additionally, online forums and communities related to audio equipment may provide insights from users who have experience with the Reactor 380. Additionally, some audio equipment might have USB audio output capabilities, allowing you to connect it directly to a computer or other USB-enabled devices to obtain digital audio signals..... Quote Link to comment Share on other sites More sharing options...
dailynews32 Posted December 10, 2023 Report Share Posted December 10, 2023 On 9/2/2023 at 2:27 AM, christhomas412 said: To convert analog audio to digital for your receiver's digital inputs, you can use an external digital audio converter (DAC). These devices take analog audio from your PC's 3.5mm stereo jack and convert it to a digital signal compatible with your receiver. Be sure to choose a branded products DAC with the right input and output formats for your setup, such as optical or coaxial connections. This solution will allow you to connect your PC to your receiver with digital audio quality. Quote Link to comment Share on other sites More sharing options...
Shopia432 Posted January 4 Report Share Posted January 4 On 7/18/2023 at 3:48 PM, zedlouder564 said: To obtain digital audio output from audio equipment in general, there are a few steps you can follow. Firstly, refer to the user manual for the Reactor 380, if available, as it should contain information on its audio output options including corporate magician. Look for any digital audio output ports or connections mentioned in the manual. Common digital audio output options include S/PDIF (Sony/Philips Digital Interface) and HDMI. If the Reactor 380 has any of these digital audio outputs, you can connect them to compatible devices such as audio interfaces, soundbars, or AV receivers that support digital audio input. Additionally, some audio equipment might have USB audio output capabilities, allowing you to connect it directly to a computer or other USB-enabled devices to obtain digital audio signals..... Quote Link to comment Share on other sites More sharing options...
zamirmewelldy Posted April 22 Report Share Posted April 22 On 9/2/2023 at 1:49 AM, mikejame412 said: To get digital audio out of a 3.5mm stereo jack, you'll need an external digital audio converter (DAC). These Franchise my business devices can take the analog audio output from your PC and convert it into a digital signal that your receiver can process through its digital audio inputs. Make sure to choose a DAC that suits your specific needs and supports the audio formats you require for 5.1 or 7.1 sound. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.