Thermaltake View 91 - Help figuring out the best water cooling and air flow in my new build

[SmellySocks]

Hi, thanks for clicking, hope you are well  I am seeking advice in setting up the best water cooling configuration for my new PC which will include a custom hard tube water loop (both CPU and GPU running in SLI).  I have never dabbled with water cooling before.  

The spec for the computer is as follows:-

• Auros Z390 Master Motherboard 
• Intel I9-9900k Processor
• 2 x Auros RTX 2080 TI Extreme Waterforce WB 11G running in SLI (NvLink) 
• 32GB 3200mhz DDR4 Vengence RAM
• ThermalTake Toughpower RGB Plus 1200 PSU 
• Samsung 970 Pro M2 drive
• 2TB Barracuda HDD
• Thermaltake View 91 case - https://www.thermaltake.com/Chassis/Super_Tower_/View/C_00003161/View_91_Tempered_Glass_RGB_Edition/design.htm
• Maybe some extra lighting and the Pacific R1 Plus Memory lighting kit (if i can find it across the pond).    - https://www.thermaltake.com/Cooler/Liquid_Cooler_/Others/C_00003373/Pacific_R1_Plus_DDR4_Memory_Lighting_Kit/design.htm

I have thus far purchased the Pacific M360 custom water cooling kit - https://www.thermaltake.com/Liquid_Cooler/Liquid_Cooler_/LCS_Kits/C_00003190/Pacific_M360_Plus_D5_Hard_Tube_Water_Cooling_Kit/design.htm

I know I need to add at least another radiator to the setup but I am at a dead end and need your help going forward:-

1. How many extra radiators and what size do you recommend ( I MAY dabble with overclocking)
2. Which is the best configuration in terms of the radiators placement?
3. Should the fans be set to push / pull and on which radiator?
4. The case has 3 frontal fans but they are shielded by a plane of glass and I am therefore unsure as to how the those fans affect the air cooling.  What is the best set up for air cooing throughout the case?  

Any assistance would be gratefully appreciated.

 

Cheers 

Socks