Cold5trike Posted February 17, 2020 Report Share Posted February 17, 2020 I bought this case and have been unable to get the fans to work properly and controlled. I have them linked to the small board style fan controller. The fans have 6 pin connectors and therfore can only be plugged in there. The controller does not work as you cannot connect this to anywhere on the motherboard. Therefore although I can change the colour I cannot control the speeds of any of the fans. The software does not work as it says they fans are not connected which is true as there is no cable to connect the View 37 in built connector. i contacted my supply who got on to Thermaltake who then sent me a controller that is the newer style. This obviously does not work as my fans are 6 mins not what the new fan controller takes. I contacted the supplier again and this time Thermaltake sent me a new controller with none of the connectors. I can only assume something is missing as I do not seem to be able to connect the controller card to the motherboard. I was going to ignore the controller card and just plug the fans straight onto the relevant sys fans on the board. This I cant do though as the inbuilt case fans are 6 pin connectors not the standard 4 pin pwn. I hace 2x 200m in the front and 1 120mm at the back. None of which can be controlled to adjust the speed settings to remove hot air out of the system and bring cold air in faster. Can anyone shed some light on this as little short of buying new fans to fit right onto the motherboard I cant seem to get anywhere with Thermaltake. thanks in advance Quote Link to comment Share on other sites More sharing options...
Testostebro Posted February 19, 2020 Report Share Posted February 19, 2020 Hi Cold5trike, Is this the fan controller you're referring to: If so, does the part I'm circled in green, which I believe says M/B-IN (maybe meaning motherboard input?) is how it's supposed to connect to the motherboard? Based on what I read about the View 37, you can transfer control from the I/O to the motherboard using the RBG button on the case. If this doesn't work, my apologies. I don't own this case but am just trying to help based on what I read. https://www.thermaltake.com/C_00003325.htm Hopefully someone else can chime in with better info. Quote Link to comment Share on other sites More sharing options...
MaxH Posted November 12, 2022 Report Share Posted November 12, 2022 The fans work correctly in my case. I have had a fan fail and the issue I have is that I need to replace on of the fans. It is proving to be almost impossible with the current configuration ie the 6 pin connector. It is like these fans are not supported in Australia Quote Link to comment Share on other sites More sharing options...
Drizzlin Posted October 9, 2023 Report Share Posted October 9, 2023 Do you know where I can buy just the board? Need to replace mine Quote Link to comment Share on other sites More sharing options...
Millertime Posted January 7 Report Share Posted January 7 Is there any where I can buy good condition 6pin fans? Mine broke and I have that exact fan controller but I can’t find the six pin fans. ? Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.