Franco Warboy Martinelli

Each ram will have a different design;) I show you some steps. Only at the end will we see the final result;)

After preparing the surface, I start the first part of the graphic. This ram will be the Marine's rifle.

We turn on the compressor, we prepare the colors and start creating the new design!

ohhhh, I'm curious !! good luck

Sounds good bro! good Luck!

wow, great idea. Good fun

We show you some photos of the Thermaltake Toughram DDR4 3200 MHz

Hello to all! My customization will start from the creation of a unique design through airbrushing, I will also use the gold leaf technique to add details. Other details will be painted with a chameleon paint, it will create a colourshift visual effect depending on the viewing angle. The ram support will be inspired by STARCRAFT 2. I start by warming the bed ... and I start the print for the ram support.

good luck Guys!

Tthor Mod by Warboy

Red Core Mod by Warboy

MB ASRock B365 Phantom Gaming with the Ram waterRam RGB Liquid Cooling Memory DDR4 3200MHz 32Gb and the WB: Pacific W5 CPU Water Block with the Pacific C-PRO white and blue, which one do you prefer? Rad: Pacific CL360 Plus RGB Radiator https://ttpremium.eu/it/product/cl-w231-cu00sw-a/ Pump combo: Pacific PR22-D5 Plus https://it.thermaltake.com/pacific-pr22-d5-plus.html I install the rad e the pump combo in the front of the case.

Ram: waterRam RGB Liquid Cooling Memory DDR4 3200MHz 32Gb

after the aerography I start assembling the loop.... MB: ASRock B365 Phantom Gaming The CPU: intel i5 9600k

And Now start with the airbrushing, () You're breathtaking !!!!

Then I cut a piece of plexy to make the front of the psu cover and I painted it Before turning to airbrushing, I show you the fans I will use.

after I painted the yellow details, I painted the Cyberpunk2077 SAMURAI logo on the front of the Thermaltake S500TG case

First I added the yellow details to the grids of the case and to the front and top of the Thermaltake S500TG case.

We start by removing the very sturdy Thermaltake S500 TG case to realize a custom painting and an airbrushing

Hello to all Gamers & Modders, today I present to you my new mod inspired by the videogame CYBERPUNK2077. For this mod i chose the case Thermaltake S500 TG https://it.thermaltake.com/s500-tg-mid-tower.html Hardware Specs: MB:ASRock B365 Phantom Gaming https://www.asrock.com/MB/Intel/B365 Phantom Gaming 4/index.asp Cpu: Intel I5 9600k Ram: waterRam RGB Liquid Cooling Memory DDR4 3200MHz 32Gb https://ttpremium.eu/it/product/cl-w252-ca00sw-a/ SSD: 512 Gb S3plus Technologies PSU:Toughpower iRGB Plus 1250W Titanium https://ttpremium.eu/it/product/ps-tpi-1250dpcteu-t/ VGA: in arrivo Custom Loop: WB: Pacific W5 CPU Water Block https://ttpremium.eu/it/product/cl-w208-pl00tr-a/ Rad: Pacific CL360 Plus RGB Radiator https://ttpremium.eu/it/product/cl-w231-cu00sw-a/ Pump combo: Pacific PR22-D5 Plus https://it.thermaltake.com/pacific-pr22-d5-plus.html Sensor: Pacific TF1 https://ttpremium.eu/it/product/cl-w219-pl00bl-a/ Fan: Riing Trio 12 RGB Radiator Fan TT Premium Edition https://ttpremium.eu/it/product/cl-f072-pl12sw-a/ Fittings: C-PRO G1/4 PETG Tube 16mm OD Compression – Blue https://ttpremium.eu/it/product/cl-w210-cu00bu-b/ C-PRO G1/4 PETG Tube 16mm OD Compression – White https://ttpremium.eu/it/product/cl-w211-cu00wt-b/ Tube: Thermaltake V-Tubler PETG Tubo 5/8 “(16mm) OD 500mmhttps://ttpremium.eu/it/product/v-tubler-petg-tube-500mm-4-pack/