Jump to content
  • Forum Statistics

    9.8k
    Total Topics
    55.6k
    Total Posts
  • Member Statistics

    136,874
    Total Members
    16,800
    Most Online
    Jpowell5
    Newest Member
    Jpowell5
    Joined

jeffro29

Members
  • Posts

    3
  • Joined

  • Last visited

jeffro29's Achievements

Beginner

Beginner (1/10)

0

Reputation

  1. Just an update if anyone stumbles across this. I hooked the controller thats not detected to another set of thermaltake pure plus 12 and it worked just fine. It has to be something with this ryzen chip.
  2. Hi all! I have the TT pure plus 12 and got it all connected last night. I fired up my PC and to my dismay, there was no RGB. At all. The fans spun correctly but there was 0 lighting. So I went ahead and put my pc back together and thought I would just download the software...maybe the controller needed it before it lit up. NOPE. Now the software is telling me that the controller is not recognized. So still, no lights. This isn't my first pair of pure plus 12 as I installed some over the summer in my sons case. I know they're hooked up correctly. One thing I have seen is that Ryzen chips don't play nice with this particular set of fans. Not sure if thats causing it or not. Below are my specs: Asrock 470x/sli master - flashed recently to support chip I have Ryzen 5 3600x Gigabyte OC 5700xt TForce 16GB RAM. I can't imagine anything is wrong with the controller it self as the fans do power on. But thats about as far as they get. I've plugged them into every 9 pin usb connector on my mother board and I get nothing. I know the other USB plugs work as they are attached to the USB ports on the front of my computer. I suppose the controller COULD potentially be bad for the RGB aspect of the fans, but it seems unlikely. I've had these fans since the summer and have tested them out on my sons build when setting his up. It worked fine and they went back in the box until last night when I decided to finally hook them up. Anyone have any advice?
  3. I have literally the EXACT same issue. Did you ever find a solution? I have the 3 fans plugged into the controller, I have the cable running from the controller to the motherboard using the USB and when I plug in the power cable from the controller to the molex, the whole computer flashes on then immediately turns off. I mean it's a split second. Unplugging the molex cable to the PSU, the computer runs and boots just fine, but the power just kills the whole system. Planning on returning them to best buy unless you(or anyone, really) has figured out why this is happening.
×
×
  • Create New...