Jump to content
  • Forum Statistics

    7.5k
    Total Topics
    54.6k
    Total Posts
  • Member Statistics

    134,663
    Total Members
    16,800
    Most Online
    dalganatbedrettin
    Newest Member
    dalganatbedrettin
    Joined

mateusz1807

Members
  • Posts

    5
  • Joined

  • Last visited

mateusz1807's Achievements

Beginner

Beginner (1/10)

0

Reputation

  1. Finally, after probably 4 mounts and greasing everything with paste, the temperatures have dropped a bit. In games I got around 60 degrees. In the meantime I bought an aquacomputer kryos next block for a test and the temperatures were the same. I just have a warm processor ¯\_(ツ)_/¯ I already have a 3rd rad bought, I'm waiting for the tubes and will install. I will see how this will affect the temperatures.
  2. Are there any Pacific MX2 Ultra users here? How about performance for you guys? I feel like my CPU temperatures are pretty high. I have 2 360mm coolers, one standard 25mm thick and the other 40mm thick in a push/pull configuration. Ryzen 9 3900X. Temperatures at rest around 50° Celsius. During gaming when the graphics card is mainly loaded (also water cooling) the card has temperatures around 60° C, the liquid around 50° C, and the CPU over 70° C with usage at 30-35%. During the cinebench test the CPU reaches 75°-77° C. When benchmarking the CPU and GPU simultaneously, CPU temperatures reach 86° C. CPU is usually about 20° C warmer than GPU or fluid. I even recently took the block off and checked carefully with the instructions to make sure everything was put on correctly. Now, when I have only Chrome open, with CPU and GPU usage at 5-10%, ambient temperature 25° C, GPU 35° C, liquid 39° C, CPU 53° Not too warm?
  3. Hello I recently noticed something disturbing. Something like cracks have appeared where the reservoir connects to the pump. The parts were purchased last September. The system was put together even later, in October or November, so it's not even a year old yet. On holidays I've made slight changes to the tubing, and of course replaced the fluid in the process, but I haven't moved the reservoir. Should I be worried about this?
  4. Can't agree with you As you can see it is possible to get parts. And the approach of the company itself surprised me very positively
  5. Hello Will I buy rubber grommets for view 51 somewhere? Mine started to fall apart after 3 months. I tried to get this information from the seller, but unfortunately it failed, after a few months of waiting I gave up. I also contacted at least 3 times via the contact form on thermaltake, but never got a reply.
×
×
  • Create New...