Search the Community
Showing results for tags 'thermaltake uk modding trophy 2018'.
Found 2 results
Thanks for checking out my build log, I have been lucky enough to have been pick (1 of 5) to be apart of the Thermaltake UK Modding Trophy 2018, It’s been 2 years since the last one, I am very honored to have been chosen. I just want to say a massive thank you to all the sponsors, Thermaltake, Asus, AMD, Adata, Bit-tech and Scan for their support in this competition. The name of my project is #TT20. I have attached some drawing below that I submitted for the project, It will have a very clean look to the build. I always like to try new techniques or do something that I have not done in a build before and this build will be no different. I will be keeping the front and the top of the case stock. The back, side and the internal of the case will all be modded, Back and Side Front and side, The Hardware, 1 x Thermaltake Level 20 XT chassis 1 x Thermaltake M360 Plus water-cooling kit I 1 x Thermaltake 850W Toughpower ‘SYNC’ Edition PSU 1 x Asus ROG Strix X470 - F Gaming motherboard. 1 x Asus Dual RTX 2080 OC 8GB 1 x AMD Ryzen 7 2700X CPU 1 x Adata SX6000 256GB M.2 SSD 1 x Adata XPG Gaming D10 2,400MHz 16GB (2 x 8GB) DDR4 2x Riing Plus 20 fans RGB 6x Riing Plus 12 Fans RGB TT Premium PCI-E 3.0 Extender I Thermaltake also gave us, Thermaltake Dasher Gaming Mouse mat, Thermaltake X1 RGB, think I am going to mod this. TT esports Nemesis mouse RGB I do have more stuff coming once I have them I will update the build log. Feel free to comment below. Thanks Richard.
Hello, so somehow this novice of a modder has been chosen to be one of the five competitors in this years Thermaltake Modding Trophy! Words cannot describe how much this means to me nor could I tell you the challenge ahead this brings to me as newcomer on the modding scene, I sure feel like I have a lot to prove! My design of course got me in to the competition and that is what I call '20th Century TT' so let me tell you where the idea came from although it's pretty obvious to most. As soon as I heard the competition was Thermaltake's 20th anniversary the 20th Century Fox movie studios came right to me, I thought it was a good idea and what do you know, apparently it is and I can finally show you all the design that got me here. I'm proud to be in this position and to show you all what I can do! The Main Hardware 1 x Thermaltake Level 20 XT chassis 1 x Thermaltake M360 Plus water-cooling kit 1 x Thermaltake 850W Toughpower ‘SYNC’ Edition PSU 1 x Asus Socket AM4 Motherboard (model TBC) 1 x Asus Nvidia-based graphics card (model TBC) 1 x AMD Ryzen 7 2700X CPU 1 x Adata SX600 128GB M.2 SSD 1 x Adata M.2 RGB heatsink 1 x Adata Spectrix D41 3,000MHz 16GB (2 x 8GB) DDR4 At the moment I'm still gathering a few items that I will need and soon discovered that some of the items I originally planned are no longer available so will have to search elsewhere, which isn't as easy as it sounds but not to worry. I'll update again once I have more on the way so this post may be quiet for a week or so, I just wanted to get my head in the door and say hello. First package for the build, we got this on the 28th of September for the opening ceremony at Scan HQ and what an awesome day that was all round! Second delivery was two packages, we got them last week and oh my where am I suppose to put all of this? And what a beautiful case it is! Sorry for stock photo I got excited and couldn't keep it in one piece long enough for a photo. Here's a little progress I've made over the past day, I've taken every piece of metal that isn't riveted away from the chassis and plan to paint it antique gold to help keep in with the theme, I've of course added some glitter to the two large front plastic columns, I couldn't help myself with that! I somewhat feel like it is a part of me now, I've used it on all my builds but none was as over the top as the first but that was for my daughter so was to be expected, anyhow I certainly feel it got my name out there, so less about me and more about the build in question. Not only did I paint all the metal removable but also the dust filters! Albeit a couple of them are on the bottom of the case and won't be seen but I didn't see no reason not to do them, it'll please me at the very least. I''ll have to re-do the motherboard tray as too much spraying has really buggered my wrist, from an old injury so that'll be on hold for the next few days at least, in the meantime I do plan on finding somewhere somewhat local that can supply me some acrylics, it's harder than you think to find antique gold vinyl! I'll also update with some more of the pictures from the work on the filters and such when I get around to finishing the motherboard tray so stay tuned and thanks for looking! Some more stuff came for the build and I managed to finish the motherboard tray this time around but I also had to do the redo the front columns due to an issue with the glitter I was using. Thermaltake M360 water cooling kit & Pacific W4 Plus CPU water block. Thermaltake Pacific PR22-D5 Pump & res combo. Some Thermaltake tubing, liquid, fittings and pipe bending kit, despite this will be my first time water cooling I think I have everything I need. Thermaltake ToughPower Grand RGB 850 Thermaltake Pacific Rad Plus LED Panel & Lumi Plus Oh the glorious Thermaltake Riing Plus fans! Oh what is this... It only the Thermaltake Pacific V-RTX Plus! Last and not least the motherboard tray fitted in the chassis, looking very gold at this moment indeed and there is more to come... I may need to think about how I go about this as it's very reflective. No update just yet but we do have some shots of the beautiful Thermaltake Pacific V-RTX Plus GPU block! Sadly I had to change the colour scheme slightly due to not being able to source any more antique gold acrylic, so now it's just gold! I've also done a little progress too, tomorrow I should get around to putting the block on the GPU! (Should be fun). Anyways hope you like what you see because there's even more incoming, for some it may be a little too much but right now I think it's going to look better than I expected! I got the GPU block on, no issues other than my heart rate was double of what it should of been during the process. Some of you may of noticed the little detailing I've done on the GPU backplate, I'm glad I didn't do more than that, I think it's a nice subtle touch, anything more would of been over the top... If it's not already. Forgot to add an image of the side panel that will be used for the left side of the case and starts to set off the theme I have for this build.