Search the Community

Hi guys ! At first, I apolize for my english language, i try to do my best So i recently buy view 51 argb black, its beautiful ! I already buy water 3.0 argb watercooling for my processor on b550 motherboard from MSI, with mystic light. First try : I try to plug argb connector of my watercooling argb to the same place as chassis's fan, as you can see on as you can see in the example screenshot. With this one I can only control my rbg with the reset button on my view 51, when i try to hold 3 sec to past with motherboard, only one led is red and on mystic light when i change the color of jrainbow nothing is happening. Second try : I tried another method then, I have 2 jrainbow connectors on my motherboard, I tried to connect the water 3.0 watercooling directly to one of the two jrainbow connectors, with that I can now control the rgb of the watercooling but still not control the unit fans of the view51 from the motherboard sotfware mystic light. My question is therefore if I buy the TT Controller ( https://fr.thermaltake.com/tt-sync-controller-tt-premium-edition.html ) to connect the fans of the view 51 box instead of connecting them to the chip, will it work? Or is there another solution? Thank you so much and have i nice day !

Hi All. My name is Chris and I am from Scotland. I have been dabbling with tech ever since I got my Commodore 64 back in the '80s, but did not get my first 'proper' PC until I threw together a bunch of other peoples' leftover parts. Oh yes, my Pentium II @ 400Mhz with a Riva TNT2 PCI card was quite the beast; or maybe not . I served in the military for a total of 8 years, then briefly worked in I.T. before starting a career within the Civil Service. Tech and Gaming have both been passions of mine now for several decades, but it was only recently that I returned to higher education to pursue a tech-related degree. In my spare time I play my fair share of video games, but also enjoy the outdoors as much as I can. I am very humbled to have been selected as one of the five contestants for the Thermaltake UK 2020 Case Mod Challenge, and hopefully my build progress can at least put a smile on your face during these difficult times. Speaking of progress, it will be a few weeks until I get started building I am afraid; as I am in the final weeks at University. But as soon as my online assessments and dissertation are out of the way, I will post regular updates. The first shipment of components arrived just yesterday, consisting of: ThermalTake View 51 Snow ASUS ROG STRIX X570-F Gaming ASUS Radeon RX 5700 500GB Seagate FireCuda 520 14TB Seagate IronWolf Pro 850W Thermaltake Toughpower GF1 Thermaltake Pacific Hard Tube Water Cooling Kit Thermaltake Pacific V-RX 5700 Series Plus GPU Waterblock Thermaltake Water Cooling Pacific Hard Tube Bending Kit 300mm Thermaltake TtMod Sleeved Cables 300mm Thermaltake TT Premium PCIe Extender The crew at #scancomputers worked tirelessly to get these parts out to us, so huge thanks to them. I am blown away by #Seagate not only for providing the blistering fast PCIe 4.0 FireCuda, but the huge 14TB Ironwolf Pro; I wonder if it will be possible to install my entire Steam Library? There are more parts on the way from the fantastic folk at #Thermaltakeuk and #AMD, I will make sure to post pictures of them when they arrive. As far as the design itself... ...that will also have to wait for another day. Stay safe and take care everyone!

Hello, Just finished building my AMD system in my new TT View 51 case. The issue is after wiring the front panel switches into my Aorus x570 pro wifi board. When I press the reset button on the front panel to switch from the default rainbow color on my case fans, my machine reboots. I have tried short pressing, long pressing 3 seconds indicated in instructions, and trying different placements of the H.D.D Led pin ( currently located in the Hard Drive Activity LED location). All to no avail. Can anyone please help, the directions are a little vague. Thanks, MT

I am attempting to connect to a GIGABYTE TRX40 AORUS MASTER motherboard. I have a Floe Riing 360 set up in the top of the case that is working fine. Attached are photos of the connection. I can provide a video example of the case power-up and fan light up/no spin. Here are my working theories as to the malfunction: My initial suspicions are with the cables that were provided with the case. I am using the [E] Cable with the 4-pin connector (+5,D,-,G). They do not connect well with the motherboard and slip off easily. I have tried the other cable that was bundled with the case [F] but cannot find a suitable pin on the mobo to connect to. A small part of the first suspect is the COM1 cable that has a SATA connection. My initial thinking is that this is to chain SATA power from the mobo to a nearby SATA drive. That logic falls apart when I compare it to the Floe Riing that requires both USB and a SATA power supply. When I try to connect this to a SATA cable into the power supply, the power supply throws out a warning light and the case fan lights no longer turn on. Since this is a step in the opposite direction I chose to disconnect this cable. It doesn't seem like it needs the power from the mobo and the power supply. I did not want to turn on the power once I saw the warning light and saw that the fans no longer lit up, so I don't know what happens next (maybe the fans do work!). The connector in question is in the second photo labeled caseRGBcontroller.jpg Next suspicion is an incompatibility with the mobo, though I am not sure how to troubleshoot this. I do not have an rgb compatible mobo as a spare. The working Floe Riing, with its USB connector and molex power supply, leads me to believe that there isn't enough power going to the case fans that the mobo provides. The pin may only have enough power for a light, not a light and a fan. My last suspicion is that they were DOA and will not spin up. This seems very odd to me as the case was shipped in perfect condition and I have not damaged the case in any way. It's frustrating to be at the finish line and not be able to cross it. Any advice anyone can provide is greatly appreciated! Thank you, and be well.

See screenshot below - No cable or documentation came with case for this connection. Any help would be appreciated.