rkadair Posted July 16, 2014 Report Share Posted July 16, 2014 How do you add two 140mm fans at the bottom of the case Quote Link to comment Share on other sites More sharing options...
Tt Leo Posted July 16, 2014 Report Share Posted July 16, 2014 As you can see from the picture above fans that have been installed are 120mm, the mounting points that circled in yellow are designed for 140mm fans (there are corresponding mounting points on the other side too which you can't see from this picture). To install up to two 140mm fans, you will need to remove the bottom drive cage. note: something to watch out for is the design and length of your PSU, because once you installed two 140mm at the bottom, you may face difficulty on routing the PSU cable, since the gap in between is not very big. Quote Link to comment Share on other sites More sharing options...
Tt Kenny Posted August 4, 2014 Report Share Posted August 4, 2014 Nice liquid cooling build!! Quote Link to comment Share on other sites More sharing options...
TeeBlack Posted August 20, 2014 Report Share Posted August 20, 2014 i really like this case. probably the best TT case so far that i like besides the V71. Quote Link to comment Share on other sites More sharing options...
zimzoid Posted August 25, 2014 Report Share Posted August 25, 2014 i really like this case. probably the best TT case so far that i like besides the V71. Hi yes its a great case, for me it was a decision between this or the V71, i went with the V71 because the HDs could be mounted in the back keeping front clear for unobstructed air flow. Quote Link to comment Share on other sites More sharing options...
ltolman Posted January 10, 2015 Report Share Posted January 10, 2015 Okay so there are 3 HD cages; how do I go about removing one of them (particularly the bottom so I can install my 2 fans). Is there some screw that if I look on the side panel where the Power Fan Connectors are at I will see it? Thanks. And HA; oops I installed one 140mm fan on the bottom but way way bottom hehe Quote Link to comment Share on other sites More sharing options...
Tt Leo Posted January 21, 2015 Report Share Posted January 21, 2015 Okay so there are 3 HD cages; how do I go about removing one of them (particularly the bottom so I can install my 2 fans). Is there some screw that if I look on the side panel where the Power Fan Connectors are at I will see it? Thanks. And HA; oops I installed one 140mm fan on the bottom but way way bottom hehe there are thumb screws securing the cages, simply remove the panels, you should be able to locate the thumb screws for details please take a look at the user manual. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.