FattyPatty Posted March 27, 2020 Report Share Posted March 27, 2020 Firstly, let me start by saying that I am a big fan of Thermaltake products. I have just completed building a brand new 2020 spec gaming rig. Components are shown below: I am unfortunately experiencing the same issue described by Lajota - https://community.thermaltake.com/index.php?/topic/64879-riing-plus-6-fans-setup/&_fromLogin=1 , in that I am attempting to connect two controllers, having configured the DIP switches for both 1/2. It does not seem to matter what configuration I use to connect these two controllers, they both are only shown as controller 1 when I launch TT RGB PLUS - No controller 2 is shown, though both devices will work in position 1. I was able to configure all the fans eventually by using one controller at a time, however the configuration is lost on re-boot, for the fans connected to which ever controller is not being recognised in position 2. I have tried a number of connections options including the MB USB 2.0 with the Y cable provided, Internal USB Hub, MB Rear USB 2.0, 3.0, and 3.1, and the USB 3.0 Hub included in the case. All give me the same effect, one active controller in position 1. I am looking for some clarity on what hardware conflicts or software might be causing this issue to occur. Plz, send help, Pat. Quote Link to comment Share on other sites More sharing options...
FattyPatty Posted March 28, 2020 Author Report Share Posted March 28, 2020 Resolved; After some research and guess work, motherboard compatability does seem to be a common theme for Gigabyte products. In the end, for me it was as simple as disable/re-enable the Generic USB Hub in device manager > Reboot > Both controllers now recognized within the App. All fans now auto configure on boot. Quote Link to comment Share on other sites More sharing options...
EvitaDLape Posted December 15, 2021 Report Share Posted December 15, 2021 Thank you for sharing this insightful idea about the Multiple Controller Problem. The author thinks that by writing this post, he might provide some light on how to connect two controllers after configuring the DIP switches for both 1/2. I'd talk about this more if I had more time, but I'm currently focused on finding the best essay writing service to accomplish my assignment, and I came across this website https://trusted-essayreviews.com/. It is more than just a writing platform; it may also help me revise my article. This is a fantastic dissertation help service. Quote Link to comment Share on other sites More sharing options...
Carlos Zapico Martinez Posted February 14, 2022 Report Share Posted February 14, 2022 hola. saber si después de haber conectado las dos controladoras, y en la segunda controladora enchufada con el cable puente a la primera y establecer el DIP 2 en la segunda controladora, ¿tienes que enchufar el cable de corriente a la fuente de alimentación en la segunda controladora, o ya con que este enchufado en la primera controladora vale para las dos.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.