BCassels Posted June 30, 2015 Report Share Posted June 30, 2015 I received my commander ft and installed it today and the touch screen doesn't seem to be working. I can't push anything on it. Before I return it can anybody confirm if there is a lock somewhere or if I might be missing something? Donaldol, nataGomb, JeremybbName and 1 other 4 Quote Link to comment Share on other sites More sharing options...
ThermalMike Posted July 6, 2015 Report Share Posted July 6, 2015 BCassels, If you are talking about the fan speed control, make sure you change it from "Auto" to Manual" in order to make adjustment on the fan speeds. The Fan options:1,2,3.. you should be able to select them without anything even plugged it, just needs the molex connected for the display. Keep us posted on what has happened since you got it, sorry for the delay with my reply. We also have tech support you can call us to discuss as well, info in my sig. Quote Link to comment Share on other sites More sharing options...
kww Posted March 12, 2020 Report Share Posted March 12, 2020 Having issues with readout: Positions 1 and 2 just show ( - ) position 3 shows normal operation (Temp and Speed) and position 5 shows normal operation (temp and speed) but position 4 is flashing and gives an alarm with no fan speed showing. I've checked all wires and all seem to be in working order this is being used on Thermaltake 200 mm fans blue LED only. With Commander FT installed none of the LEDS only work on low or not at all. Any help would be appreciated. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.