xion2552 Posted April 30, 2020 Report Share Posted April 30, 2020 Just got my new build put together. Is there a way to connect the modules to my motherboard such that Neon Maker reads 9 fans or atleast both my modules separately? I have 2 modules (one with 4 fans and one with 5 fans). Originally I used the bridge between them and then connected the primary to the USB on the motherboard. Neon maker registered the first module but not the second. Then I took away the bridge and used the other usb connector from the first cable to connect to the second module. I had two modules hooked to one USB on the motherboard. Neon maker did not register any modules now. Opened that case back up, now currently running two separate usb headers one to each module. Again, neon maker cannot find any modules. Please help. MSI MEG x570 ACE Motherboard btw. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.