Jump to content

Recommended Posts

Posted

I have a micro atx h97 pro 4 mobo, and I am not sure how to install it into the versa h22 case because the guide that comes with it is not very descriptive. Help would be greatly appreciated or a step by step would be awesome, thanks!

Posted

The first thing you would want to do is put in the IO plate/cover. That's the thin metal plate that covers the ports on the back of the motherboard. Next you'll then want to make sure the stand off's are in the correct spot, if you have one that doesn't match up to the motherboard it could potentially cause a short circuit and we wouldn't want that. You should have 8 standoffs, three on top, three on bottom, and two right in line with the PCIE slot to the left and right side.

 

The next part would be connecting up your f_panel (Front Panel) with the switches and more than likely USB connections. Your f_panel connections are usually located at the bottom right of the motherboard and look like this:

step7-1.jpg

 

Most motherboard now come printed with the information about the pin setup and the cables should be marked accordingly.

 

Hope this was helpful, good luck!

Posted

The first thing you would want to do is put in the IO plate/cover. That's the thin metal plate that covers the ports on the back of the motherboard. Next you'll then want to make sure the stand off's are in the correct spot, if you have one that doesn't match up to the motherboard it could potentially cause a short circuit and we wouldn't want that. You should have 8 standoffs, three on top, three on bottom, and two right in line with the PCIE slot to the left and right side.

 

The next part would be connecting up your f_panel (Front Panel) with the switches and more than likely USB connections. Your f_panel connections are usually located at the bottom right of the motherboard and look like this:

step7-1.jpg

 

Most motherboard now come printed with the information about the pin setup and the cables should be marked accordingly.

 

Hope this was helpful, good luck!

I was confused because the versa h22 comes with three brass standoffs and are the rest built in? and if so then how do I install it with the build in standoffs?

  • 3 weeks later...
Posted

Jackgermany

how did you make out with the install I recently purchased the same case and was courious about the 3 standoffs as well since it looks like the case has built in standoffs ?

I also am having a problem with no power on after moving all the parts from my current desktop to the new case and when I put and the parts back in my original case all works so I wondering if you had the same problem

  • 4 years later...
Posted

This case has builtin standoffs. If you try to use the three eights high standoffs that most cases use you will find that the back ports wont match up with the inserted panel.  I have no idea why they include the three extra standoffs. Maybe they are for the heat sink on the M.2 drive.  You are right. The instructions for this case are terrible.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...