Some LEDs not working

[Castiron]

I have an interesting problem.

I have 6 case fans.

4 of them are Riing Quad 12 in the top of my case (they are on controller 1), They seem to be working fine.

I have 1 Riing Quad 14 in the back of my case (Its on controller 2), It seems to be working fine.

I have 1 Riing Trio 20 on the front of my case (Its on controller 2), Here's where the fun begins.

When I first start my computer all the fans light up and run through their default pattern, They will keep doing this until I startup the TT Sync software. Then the LEDs on the Trio 20 (6 of them) on the inner part of the fan, on the right side when facing the fan just stop responding. They each take a different color, and just stay on solid. If I go into the TT software and select the Trio 20 all the LEDs turn red (Even the non-responsive ones).

DIP settings are; Controller 1 (all off), Conttroller 2 (1 is on, 2 is off, 3 is off, 4 is off).

Both controllers are Molex powered.

The USB header cable is plugged into a USB headder, the 2 mini USB are each plugged into one of the 2 controllers.

There is no bridge cable between the controllers.