mateusz1807 Posted June 10, 2022 Report Share Posted June 10, 2022 Are there any Pacific MX2 Ultra users here? How about performance for you guys? I feel like my CPU temperatures are pretty high. I have 2 360mm coolers, one standard 25mm thick and the other 40mm thick in a push/pull configuration. Ryzen 9 3900X. Temperatures at rest around 50° Celsius. During gaming when the graphics card is mainly loaded (also water cooling) the card has temperatures around 60° C, the liquid around 50° C, and the CPU over 70° C with usage at 30-35%. During the cinebench test the CPU reaches 75°-77° C. When benchmarking the CPU and GPU simultaneously, CPU temperatures reach 86° C. CPU is usually about 20° C warmer than GPU or fluid. I even recently took the block off and checked carefully with the instructions to make sure everything was put on correctly. Now, when I have only Chrome open, with CPU and GPU usage at 5-10%, ambient temperature 25° C, GPU 35° C, liquid 39° C, CPU 53° Not too warm? Quote Link to comment Share on other sites More sharing options...
Mitolo Posted July 19, 2022 Report Share Posted July 19, 2022 I am running x2 360 rad with push pull with i9 12900kf and a rtx 3090 and my CPU temps sit around 29-31c on idle and when gaming about 38-42c GPU while benchmarking on 3dmark hits 47c What I need to find is how to get this screen to display more than 1 temp at a time. Be nice if there was a mini AIDA64 mod for it Quote Link to comment Share on other sites More sharing options...
mateusz1807 Posted July 19, 2022 Author Report Share Posted July 19, 2022 Finally, after probably 4 mounts and greasing everything with paste, the temperatures have dropped a bit. In games I got around 60 degrees. In the meantime I bought an aquacomputer kryos next block for a test and the temperatures were the same. I just have a warm processor ¯\_(ツ)_/¯ I already have a 3rd rad bought, I'm waiting for the tubes and will install. I will see how this will affect the temperatures. Quote Link to comment Share on other sites More sharing options...
Mitolo Posted July 19, 2022 Report Share Posted July 19, 2022 Well I delided my cpu and also lapped the IHS and installed a cpu retainer. I should have done a before and after .... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.