MooZ Posted November 22, 2015 Report Posted November 22, 2015 Inspired in futuristic spaceships, this project will be a casemod for the Thermaltake Core V1. Hope you like! generic cialis 1 Quote
MooZ Posted November 22, 2015 Author Report Posted November 22, 2015 After spend some time designing and cutting, the puzzle is ready. Now the main appareance is clear and the ideas will come up in the process. The panel is relocated from the front to the top. Don't ask why is gold... is a long story A cover will hide this panel, only access when need, main feature of stealth systems. Quote
MooZ Posted November 27, 2015 Author Report Posted November 27, 2015 The fan grill on the back is removed, allowing to use a new grill as bridge for the watercooling tubes. Quote
MooZ Posted November 30, 2015 Author Report Posted November 30, 2015 Working on the front... first step, cut around the border. Now the path is clear to fix the new front. This part won't have any screws, so the fix point must be inside. To do that, i cut an acrylic tube, measuring the screw length to fix from inside and then cover the hole. Here you can see where the holes are located And hide... The fan is gold too (again, don't ask why). but i'll paint it white or black... let's see what fits better. On the botton there are two lights... Quote
MooZ Posted December 6, 2015 Author Report Posted December 6, 2015 Cutting the cover of the front panel... More parts of the armor (top) The ailerons needs to be cutted in angle... by now are hold using presses Quote
MooZ Posted December 12, 2015 Author Report Posted December 12, 2015 Time to paint... finally the shiny black. the screws didn't fit in the scheme with that tone, so, need to be painted too. Top ailerons are cut in angle (45 degree) to keep the inclination Now assembly... Quote
MooZ Posted December 14, 2015 Author Report Posted December 14, 2015 NMC fan&grill design in the middle an acrilic grill again... this time is transparent. placing on front panel... The new design for nova waterblock... putting the pieces together Quote
MooZ Posted December 19, 2015 Author Report Posted December 19, 2015 I manage to get a vcard with twin frozn II, for use the heatsink, with a new black and white colors, and replace it into my N460 cyclone. Then the backplate... engraved logo and dragon Meanwhile the front: Quote
MooZ Posted December 23, 2015 Author Report Posted December 23, 2015 Modding the pump... I tried to install as separate pump, but the truth is, there's not enough space inside to put it So, my solution integrates pump and reservoir on top. Side test. Quote
MooZ Posted December 23, 2015 Author Report Posted December 23, 2015 The project parts: Making the thermal armor: Adding some details... Testing the location of each part, the thermal armor has three parts which frame around the waterblock. Mounting the waterblock allow to check each one. Also, the i/o ports will be cover. to fix to the motherboard i bend two pieces of acrylic that ends in the mounting hole. I/o was painted too. Masking was more difficult than i thought, but the result worth it More details... Time for start the final assembly: Quote
MooZ Posted December 26, 2015 Author Report Posted December 26, 2015 Installing the front lights... Vcard installed and hdd led replacement Quote
MooZ Posted December 27, 2015 Author Report Posted December 27, 2015 Now is done Guess lucky found his personal spaceship! Take off! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.