Jump to content

[Malaysia] Ahmad Safuan


Recommended Posts

  • 1 month later...

All design made in Fusion 360 ,originally trying to make it fancy but im trying to keep it simple and look premium,so im not going to use original heatsink and just totally made a new heatsink for it,to improve cooling performance and look its ram mod after all ;D

512.JPG

2221.JPG

Link to comment
Share on other sites

Once done sandblasting i am trying to make all the ram will fit side by side on motherboard slot ,this process will remove some material to make it thinner and added some position circle to flip the part and chamfering,since after sand blast all the shiny part is gone.

photo_2023-05-06_21-44-57.jpg

Link to comment
Share on other sites

at the same time im doing some ram base to stick for showcase 

photo_2023-05-06_21-46-35.thumb.jpg.4df96fdf54077dd549d74fafdd1497ba.jpg

Cleaning the part to remove all grease with ultrasonic cleaner

785967418_photo_2023-05-06_21-42-49(2).thumb.jpg.31d8414913645a1a7000a538e01d45d2.jpg

the part look nice and clean

photo_2023-05-06_21-42-49.thumb.jpg.d446b2c6eea86f0f139a80cc2f937f17.jpg

Etching process ,im not trying to remove all the tool mark just to make it less visible so it have some texture that why i am machine with that pattern

823971070_photo_2023-05-06_21-42-49(3).thumb.jpg.4ebeea3be9f5b32bad3979c98135866f.jpg

Etching with NaoH 2% solution to water its react very fast

330875346_photo_2023-05-06_21-42-49(4).thumb.jpg.205524c36dbf805382711da35e28bc98.jpg

Link to comment
Share on other sites

My diy anodize system

photo_2023-05-06_21-42-50.thumb.jpg.a547e2f51a8b69dd52c6cb9265262c7a.jpg

3Amp with automatic voltage psu

1878570736_photo_2023-05-06_21-42-49(6).thumb.jpg.72cbc8b7d562622f201d62d021fad9f2.jpg

Dipping the part in 15% sulfuric acid for 1 hours

1522376365_photo_2023-05-06_21-42-49(5).thumb.jpg.825cf9266fb1839cadbc2dc9a225e4c9.jpg

Not sure what blue colour is this more like with purple tint dye 

763098768_photo_2023-05-06_21-42-50(3).jpg.20524d9f3836170d91d519f2eb75b5d9.jpg

Waiting the part to dry for awhile before sealed process

345637580_photo_2023-05-06_21-42-50(4).thumb.jpg.7e4084e485c3a51e333c35e58fc9c6de.jpg

Done look very nice with tool mark

584508556_photo_2023-05-06_21-42-50(5).thumb.jpg.e0cd2ebee66aa2e96b928c2125b3bb61.jpg

photo_2023-05-08_12-56-24.thumb.jpg.f3ba7673be12d073f427b4615fb0009e.jpg

 

 

Link to comment
Share on other sites

Cutting some stainless steel sheet for added element

993428357_photo_2023-05-06_21-42-47(3).thumb.jpg.fca84be277aa4f4254829686bcbcf3e1.jpg

test fit 100% without glue or tape very precise tolerance

111961116_photo_2023-05-06_21-42-48(5).thumb.jpg.65f52cb2daf7542f32575065c260246e.jpg

also change to cyan colour acrylic to replace the original white led bar and a little sanding at edge with 2500 grit sandpaper 

1396301197_photo_2023-05-06_21-42-48(8).jpg.d75bb4cb31a7c280b00f8654b1040f52.jpg

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...