TT Amanda Posted March 27, 2023 Report Share Posted March 27, 2023 Quote Link to comment Share on other sites More sharing options...
WanV Posted May 4, 2023 Report Share Posted May 4, 2023 dismantled Thermaltake DDR5 Ram for measurement,pretty easy to remove original heatsink with heatgun since its all stick with double tape. Quote Link to comment Share on other sites More sharing options...
WanV Posted May 4, 2023 Report Share Posted May 4, 2023 All design made in Fusion 360 ,originally trying to make it fancy but im trying to keep it simple and look premium,so im not going to use original heatsink and just totally made a new heatsink for it,to improve cooling performance and look its ram mod after all ;D Quote Link to comment Share on other sites More sharing options...
WanV Posted May 4, 2023 Report Share Posted May 4, 2023 Cutting 8mm aluminium large sheet to small size for better fixturing and precision since im going to maintain flatness for all heatsink Quote Link to comment Share on other sites More sharing options...
WanV Posted May 6, 2023 Report Share Posted May 6, 2023 Machining 5052 Alu ,its just rough still need alot of finish and machining. Quote Link to comment Share on other sites More sharing options...
WanV Posted May 6, 2023 Report Share Posted May 6, 2023 for this part we sandblast the part with glass bead to increase visual effect for added element later. Quote Link to comment Share on other sites More sharing options...
WanV Posted May 8, 2023 Report Share Posted May 8, 2023 Once done sandblasting i am trying to make all the ram will fit side by side on motherboard slot ,this process will remove some material to make it thinner and added some position circle to flip the part and chamfering,since after sand blast all the shiny part is gone. Quote Link to comment Share on other sites More sharing options...
WanV Posted May 8, 2023 Report Share Posted May 8, 2023 flipping part to do some chamfer with diamond bit Quote Link to comment Share on other sites More sharing options...
WanV Posted May 8, 2023 Report Share Posted May 8, 2023 at the same time im doing some ram base to stick for showcase Cleaning the part to remove all grease with ultrasonic cleaner the part look nice and clean Etching process ,im not trying to remove all the tool mark just to make it less visible so it have some texture that why i am machine with that pattern Etching with NaoH 2% solution to water its react very fast Quote Link to comment Share on other sites More sharing options...
WanV Posted May 8, 2023 Report Share Posted May 8, 2023 My diy anodize system 3Amp with automatic voltage psu Dipping the part in 15% sulfuric acid for 1 hours Not sure what blue colour is this more like with purple tint dye Waiting the part to dry for awhile before sealed process Done look very nice with tool mark Quote Link to comment Share on other sites More sharing options...
WanV Posted May 9, 2023 Report Share Posted May 9, 2023 Cutting some stainless steel sheet for added element test fit 100% without glue or tape very precise tolerance also change to cyan colour acrylic to replace the original white led bar and a little sanding at edge with 2500 grit sandpaper Quote Link to comment Share on other sites More sharing options...
WanV Posted May 11, 2023 Report Share Posted May 11, 2023 Final Photo Thanks to THERMALTAKE for competition invitation.its would be nicer if i have DDR5 mobo to see it glow Video will be uploaded tomorrow Quote Link to comment Share on other sites More sharing options...
WanV Posted May 13, 2023 Report Share Posted May 13, 2023 Final Video Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.