Jump to content

Recommended Posts

Hello,

My name is Dustin Porter and I built REDLINEelite Desk

I Built the desk in July of 2014 and recently Rebuilt the desk into what it is today.

A lot of hard work along with Thermaltake Sponsorship, I have created something truly

incredible.

 

My shop is now ready for the desk rebuild

IMG_20151214_142137.jpg

 

She is in the shop. Lets get to work

IMG_20151101_210523.jpg

Time to disassemble 

IMG_20151110_193942.jpg

 

IMG_20151110_205126.jpg

 

I angled both sides. The straight front was boring

IMG_20151110_215538.jpg

 

IMG_20151110_215550.jpg

 

I had to make bigger panels for the front

IMG_20151115_165240.jpg

 

IMG_20151115_165218.jpg

 

IMG_20151115_165548.jpg

 

IMG_20151115_172009.jpg

 

And there it is. Looks pretty good.

IMG_20151118_181125.jpg

 

I made this a while for something, I cant remember what but im going to use it for a monitor stand

IMG_20151129_161700.jpg

 

IMG_20151129_162243.jpg

 

 

Share this post


Link to post
Share on other sites

IMG_20151226_020058.jpg

 

IMG_20151226_021908.jpg

 

IMG_20151226_150733.jpg

 

It is starting to look like what I had imagined 

IMG_20151226_151129.jpg

 

IMG_20151226_151204.jpg

 

IMG_20151226_151646.jpg

 

Thanks to Thermaltake for sending me all of this sweet stuff for the build

IMG_20160126_150804.jpg

 

No name kitty is wanting to help. 

IMG_20160127_012020.jpg

 

IMG_20160127_215132.jpg

 

These panels will hold 3 120mm Thermaltake RGB Riing fans with a 360mm Rad behind

IMG_20160127_215913.jpg

 

IMG_20160128_195626.jpg

I made covers on each side. They will be removable for easy access to Rads and fittings

IMG_20160128_202930.jpg

 

Ok No name kitty is back. She wants to help but when I fire up any power tool she seems to not want to help anymore.

IMG_20160128_220104.jpg

 

I mounted my 240mm Rads on the front

IMG_20160129_201211.jpg

 

I had to take a break from the desk to work on my car. That was a pain

IMG_20160130_160958.jpg

 

Cutting holes for the fans

IMG_20160131_185921.jpg

Share this post


Link to post
Share on other sites

IMG_20160131_185959.jpg'

 

IMG_20160131_193242.jpg

 

Looking pretty so far

IMG_20160131_193606.jpg

 

Drilled some holes for fittings to 360 rads

IMG_20160201_163152.jpg

 

Just to get an idea of what its going to look like. and I need to mark where the mount stuff

IMG_20160201_164911.jpg

I took the cover off the PSU and mounted it over the hole i cut out for the PSU

IMG_20160210_124120.jpg

 

IMG_20160219_005135.jpg

 

IMG_20160211_205041.jpg

 

Cut fan holes for the front

IMG_20160212_195936.jpg

 

IMG_20160213_183854.jpg

 

IMG_20160213_183914.jpg

 

Got to use my new router and made some clean edges all over the place lol

IMG_20160216_234948.jpg

AMD desk Is back for repairs. I built this a while back for a friend.

IMG_20160219_212903.jpg

I decided to make these to cover the holes in the top of the desk. Also add a little design to the desk

IMG_20160222_192028.jpg

Lots of sanding and ready for paint

IMG_20160222_192044.jpg

 

IMG_20160222_222405.jpg

 

IMG_20160222_222626.jpg

Share this post


Link to post
Share on other sites

My carbon fiber vinyl arrived in the mail.

IMG_20160222_223235.jpg

 

I decided to wrap them pieces I made in vinyl. Looks cool

IMG_20160223_003300.jpg

 

IMG_20160223_010957.jpg

 

 

IMG_20160223_104805.jpg

 

I got the inside all wrapped up and ready to go in the house

IMG_20160223_111046.jpg

This thing is looking sick

IMG_20160223_111425.jpg

 

IMG_20160223_130817.jpg

 

IMG_20160223_130834.jpg

 

Called my buddy Aaron Kilgore over to help haul this beast in the house. If I had to guess she weighs about 300lbs

IMG_20160223_195201.jpg

 

Now lets start putting a pc in it

IMG_20160224_003956.jpg

 

IMG_20160224_021606.jpg

 

IMG_20160224_132528.jpg

 

IMG_20160224_164929.jpg

 

IMG_20160224_173059.jpg

 

IMG_20160224_175946.jpg

 

I got one loop finished and filled up

IMG_20160224_193311.jpg

 

IMG_20160224_193321.jpg

 

IMG_20160224_193330.jpg

 

IMG_20160224_231100.jpg

 

Trying to get air out of the lines. 

IMG_20160225_003405.jpg

 

These RGB fans are the coolest

IMG_20160225_172817.jpg

 

IMG_20160225_172837.jpg

 

IMG_20160225_172855.jpg

 

IMG_20160225_173633.jpg

Share this post


Link to post
Share on other sites

I now have a working pc and she is beast mode

IMG_20160225_193442.jpg

 

IMG_20160225_220158.jpg

 

IMG_20160226_021553.jpg

 

IMG_20160226_021610.jpg

 

IMG_20160226_021635.jpg

 

IMG_20160226_021703.jpg

 

IMG_20160226_022034.jpg

 

IMG_20160226_022125.jpg

 

IMG_20160226_022144.jpg

 

IMG_20160226_022227.jpg

 

IMG_20160226_032629.jpg

 

No name kitty has found a new place to chill

IMG_20160226_033454.jpg

 

And another lol

IMG_20160226_033801.jpg

 

IMG_20160226_033826.jpg

Now that she is up and running I still have lots more work to do...

IMG_20160226_033406.jpg

 

Thanks for checking out my build. I have put alot of time and hard work into this desk since the day I built it in 2014. 

A HUGE thanks to my sponsors on this build

Therlamtake

Corsair

Avexir

 

Please go check out my facebook page and shoot me a like. I would really appreciate it. And share with your friends

I hope you liked my build.

 

10952382_10204504700712255_143872249_o.j

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...