Mayki Posted November 2, 2016 Report Share Posted November 2, 2016 Hello, it is possible to determine the parameters (values) used SMD LEDs in RGB Pacific G1 / 4 PETG Tube OD 16 mm 12 mm ID? I want to remake it for remote control RGB strips. When the goods will be available in stores in Europe? Thank you for answer. Quote Link to comment Share on other sites More sharing options...
Dazley Posted September 25, 2017 Report Share Posted September 25, 2017 Those are SMD 1616 if i'm correct... i've measured them. Very tiny 5V RGB LEDs Quote Link to comment Share on other sites More sharing options...
Dazley Posted October 8, 2017 Report Share Posted October 8, 2017 Now that i have those Fittings here, i had some looks inside and it's a regular BRG+ header with the only difference of it being 5V except of 12V. And for such small LEDs the Fittings consume quite some power. Blue: ~70mA / Red: ~93mA / Green: ~71mA And that's just for one Fitting, which means if you want white, one Fitting would require ~234mA@5V Most if not all standart RGB controllers and headers on mainbords and GPUs supply 12V, so you have to step down the voltage and probably use an RGB LED Amp to provide the Fittings with enough juice. I am in the process of turning those Fittings into ASUS Aura compatible ones. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.