ladorna Posted February 18, 2019 Report Share Posted February 18, 2019 Hello all. I hope that I am not re-hashing anything here but I just built my computer yesterday and have run into a problem with the Floe Riing CPU temperature monitoring. I downloaded version 1.2.61 and set my pump to Temp light mode. I then noticed that the temperature reading for the pump is A LOT different than the temperature I'm getting from the motherboard software. I have attached an image from both pieces of software. I'm inclined to trust the motherboard software but I am very worried. (the pump fan is plugged into the Chassis Fan 5) Can anyone assist me in fixing this issue with the TT RGB Plus software? Thank you in advance. Quote Link to comment Share on other sites More sharing options...
STHbuilds Posted February 18, 2019 Report Share Posted February 18, 2019 I would trust the motherboard software over the riing software. You may also want to add temp sensor TT CL-W151-CU00BL-A. I use these on all my open loop builds and have been very accurate. I cant say I have had the best experience using TT software or pretty much any 3rd party software. It seems they are all getting better, but certainly not perfected yet. There is a post in the Tt community from December 25 2017 that my be of help. Good luck, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.