Guest Tt Paul Posted October 30, 2014 Report Share Posted October 30, 2014 The DRACONEM aluminum mouse pad is built to be tough enough for the hardest of battles! Tt eSPORTS decided to offer gamers the most in a premium mouse pad with the DRACONEM. The DRACONEM offers two different surfaces, an aluminum base, and a unique mouse bungee. In addition, its one of the largest aluminum mouse pads on the market because there’s no reason for cloth pads to be the only ones that come in bigger sizes. CyberDustin777, EkbergDOF and HappyBuddhaman 3 Quote Link to comment Share on other sites More sharing options...
LetsGetIt1220 Posted October 30, 2014 Report Share Posted October 30, 2014 Always wanted one of these if for nothing other than the fact it comes with an included mouse bungee Quote Link to comment Share on other sites More sharing options...
CyberDustin777 Posted October 30, 2014 Report Share Posted October 30, 2014 Since this became a pinned thread I shall post in it. A few quick tips if you plan on buying this mouse pad is the four rubber feet on each corner do not stay on if you move it. I applied a small dab of adhesive in each one and have not had a problem since. As for the bungee, instead of adhesive I used double stick tape so you have the option to move it around. Also the mouse cord does not like to stay in the slot provided in the bungee if moved or tugged on. I have the Black Combat White mouse which comes with a pre-attached velcro strap for winding up the cord for storage purposes, which I then wrapped around the bungee to keep it together. I used a second piece of velcro to make sure it doesn't move. Overall I love it! It is well made and can be cleaned very easily. If you have any more questions about this mouse pad , please feel free to ask in this thread and I will reply asap. HappyBuddhaman, LetsGetIt1220 and Tte Martin 3 Quote Link to comment Share on other sites More sharing options...
HappyBuddhaman Posted October 30, 2014 Report Share Posted October 30, 2014 I'm ordering this via Amazon tomorrow. Can't stand fabric mouse pads. CyberDustin777 and LetsGetIt1220 2 Quote Link to comment Share on other sites More sharing options...
Guest Posted November 5, 2014 Report Share Posted November 5, 2014 I'm ordering this via Amazon tomorrow. Can't stand fabric mouse pads. Take some photos when you have everything set up ok Quote Link to comment Share on other sites More sharing options...
Guest Tt Paul Posted November 7, 2014 Report Share Posted November 7, 2014 Here comes my Draconem with LEVEL 10 M hybrid, if feels like I am going to compete a professional racing contest. CyberDustin777 1 Quote Link to comment Share on other sites More sharing options...
lk2 Posted November 12, 2014 Report Share Posted November 12, 2014 While I'll prob end up using adhesive, it shouldn't be necessary. All four corners of the mouse pad have 2 small holes in them that appear to be designed for the rubber feet to snap into, but the rubber feet don't have the matching prongs. I suspect whoever made the feet was sent the wrong spec. Unless the holes are there so you can nail the mouse to your table..... CyberDustin777 1 Quote Link to comment Share on other sites More sharing options...
Guest Tt Paul Posted November 14, 2014 Report Share Posted November 14, 2014 While I'll prob end up using adhesive, it shouldn't be necessary. All four corners of the mouse pad have 2 small holes in them that appear to be designed for the rubber feet to snap into, but the rubber feet don't have the matching prongs. I suspect whoever made the feet was sent the wrong spec. Unless the holes are there so you can nail the mouse to your table..... Hi,lk2 Thank you for sharing the information, we will pass to Product Manager Team for further improvements. Quote Link to comment Share on other sites More sharing options...
CyberDustin777 Posted November 15, 2014 Report Share Posted November 15, 2014 While I'll prob end up using adhesive, it shouldn't be necessary. All four corners of the mouse pad have 2 small holes in them that appear to be designed for the rubber feet to snap into, but the rubber feet don't have the matching prongs. I suspect whoever made the feet was sent the wrong spec. Unless the holes are there so you can nail the mouse to your table..... Using adhesive has made a big improvement to the feet staying put. No nails required...lol Quote Link to comment Share on other sites More sharing options...
Guest Tt Josh Posted November 17, 2014 Report Share Posted November 17, 2014 Issue has already been escalated to our Product Management team guys! Definitely going to have an improvement on those corners! HappyBuddhaman and CyberDustin777 2 Quote Link to comment Share on other sites More sharing options...
Guest Tt Paul Posted November 21, 2014 Report Share Posted November 21, 2014 Tt Dude is doing sliding test! CyberDustin777 1 Quote Link to comment Share on other sites More sharing options...
CyberDustin777 Posted November 21, 2014 Report Share Posted November 21, 2014 I so need a Tt Dude. My rig is lonely without one. HappyBuddhaman 1 Quote Link to comment Share on other sites More sharing options...
HappyBuddhaman Posted November 21, 2014 Report Share Posted November 21, 2014 Me too, right inside the rig looking out the window. CyberDustin777 1 Quote Link to comment Share on other sites More sharing options...
CyberDustin777 Posted November 22, 2014 Report Share Posted November 22, 2014 Standing on my psu or maybe a costom shelf for him. Quote Link to comment Share on other sites More sharing options...
HappyBuddhaman Posted December 15, 2014 Report Share Posted December 15, 2014 Finally ordered this from Amazon, of course it arrived this morning at 7:00 AM, right as I was leaving for work. Quote Link to comment Share on other sites More sharing options...
Guest Tt Josh Posted December 16, 2014 Report Share Posted December 16, 2014 Finally ordered this from Amazon, of course it arrived this morning at 7:00 AM, right as I was leaving for work. You surely gonna love it! Quote Link to comment Share on other sites More sharing options...
HappyBuddhaman Posted December 16, 2014 Report Share Posted December 16, 2014 Holy crap, this is one #### of a mouse pad, no wonder it cost what it does, ####! Using two monitors and barely have to slide half the width of the pad at 800 DPI to cover both screens. I am going to have to glue these cornners on though. Tri-monitors will be a breeze with this baby! Quote Link to comment Share on other sites More sharing options...
Guest Tt Josh Posted December 16, 2014 Report Share Posted December 16, 2014 looks fantastic! Quote Link to comment Share on other sites More sharing options...
Guest Posted December 26, 2014 Report Share Posted December 26, 2014 Holy crap, this is one #### of a mouse pad, no wonder it cost what it does, ####! Using two monitors and barely have to slide half the width of the pad at 800 DPI to cover both screens. I am going to have to glue these cornners on though. Tri-monitors will be a breeze with this baby! Perfect accessories for the perfect gaming experience: Ttesports! Quote Link to comment Share on other sites More sharing options...
Guest Tt Josh Posted December 27, 2014 Report Share Posted December 27, 2014 We love making perfect gaming products! Quote Link to comment Share on other sites More sharing options...
Guest Posted January 9, 2015 Report Share Posted January 9, 2015 We love making perfect gaming products! Quality too is very good! Quote Link to comment Share on other sites More sharing options...
Guest Tt Josh Posted January 9, 2015 Report Share Posted January 9, 2015 Always moving towards better quality! Quote Link to comment Share on other sites More sharing options...
dO_ob Posted January 12, 2015 Report Share Posted January 12, 2015 looks like a sleek mousepad Quote Link to comment Share on other sites More sharing options...
Guest Tt Josh Posted January 12, 2015 Report Share Posted January 12, 2015 Sleek & Cool! Quote Link to comment Share on other sites More sharing options...
Guest Posted January 29, 2015 Report Share Posted January 29, 2015 My set up Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.