[T1000 Pure Clear]

Anyone?

[T1000 Pure Clear]

Hi,

 

As a c1000 pure clear user, with bottles bought in 2020 having a bottledate of 2016, and seeing there is a t1000 pure clear version shipped in kits...

 

Why cant I buy this coolant? Atleast, i cant find it.

[P3 - motherboard and PSU layout??]

Yes, with an ITX motherboard, not an ATX one.

 

With an ITX there is room for the bracket to be moved up 2 slots, allowing for the sideway PSU mount. Cant be done with the motherboard you posted however.

[P3 - motherboard and PSU layout??]

Then it's not possible, a normal sized PSU will just about fit in it's standard position. Sorry.

 

You can still see the RGB if you mount it with the fan facing up though, just not as prominent.

[P3 - motherboard and PSU layout??]

IIRC this is only possible if you don't mount your GPU vertically, with the p5 you don't have this restriction.

[**ATTN Users with Thermaltake Riser Cables**]

On 18-7-2017 at 1:29 PM, jnormen said:

This is annoying, I also got problems. 
First, my computer started up fast with my x299 Asus Tuf Mark 1 and Thermaltake ps 3 core I got yesterday. 
Later on, I removed the cable because I needed to put in a USB cable on the motherboard. Then gently add the PCIe cable back again. 
This time my boot hanged and the motherboard complaint about VGA. After reading some posts and saw a youtube clip regarding almost the same problem I took it out and put in again and straighten it a little bit. 

Now my computer starts but the boot does not hang but something happening, it takes time to boot up my computer, but no VGA errors. 
Regardless that I can't watch youtube clips anymore. As you can see on my image. I have tried all settings for tearing problems etc...
And I still get this boot issue... When I try my asus gtx 1080 on the pcie slot it works fine. So it's something strange with this cable.
And it's odd that it's not fixed though it seems like the problem has existed back in time... 

Did anyone get the same problem as I?  
1st... Hang at boot when it says press bios. 
2nd...It takes time to boot up stand still at bios screen (have 1 sec on bios so it's not set to higher value regarding boot)
3rd.. Stream videos got tearing regardless of vsync settings, HW acceleration on off (problem in all browsers)
4th... Sometimes I got a driver error, only got it twice after some reboots... Not sure if it was because of reboot after installing a program. 

I haven't tried 3d games yet, I do not have any atm though my computer is fresh installed, 3D Mark worked fine, but cpu benchmark showed tearing videos in the video-test-section. 

Mem is ok, cpu is ok when testing. No problem with heat. 





 

 

This is basically what we all suffer from.

It's been over a month since I got a reply so I went out and bought the premium version (TT Charge 191$) Of an Ebay seller. Sure enough, works fine. Until 2 weeks passed, then the same #### happened again. Going with a different brand now.

[**ATTN Users with Thermaltake Riser Cables**]

On 2017-5-27 at 3:56 AM, Pyro2677 said:

Yeah my wife bought me a premium cable from PLE for my birthday.  It was $85.still more than 69 on the Australian TT site but will see if this works. 

And? Did it work?

[**ATTN Users with Thermaltake Riser Cables**]

Update:

Riser cable failed again. Sent another email.

Tried to order the premium one online because im sick of this **** right now. Guess what?! ''We are happy to offer international shipping services'' Grand total for the $69 cable you ask? $191. Id happily pay for the premium one if it solves the issue, but this is just borderline stupid.

[**ATTN Users with Thermaltake Riser Cables**]

UPDATE:

Received my new riser cable today, installed it and tested it. So far it's not causing any problems. *Fingers Crossed*

The cable I received -> None of the above actually. It's sort of the cheap one, with a different lock and no thermaltake branding what so ever... What I did notice was the black top layer is pasted on with adhesive, which came off straight away with the smallest amount of bending. (installed the cable in my core P3, and both ends have the black end parts loose reveiling the cable underneath, not sure if this will cause problems but I feel it's cosmetic at this point).

Will keep you updated if anything changes.

Special thanks to @ThermalMike for his quick replies, really sped up the process.

[**ATTN Users with Thermaltake Riser Cables**]

I'm having the same issues, sent an email, no reply yet so I'm trying it here.