-
Posts
27 -
Joined
-
Last visited
-
Days Won
2
Reputation Activity
-
-
Kaleeva reacted to endalivar in 2018 CaseMOD Invitational Season 1 Voting
I voted for the USA one, but I have to say that the german one is severely underapreciated. Also the spanish one is the more authentic one IMO. The USA one is slick without sacrificing utility though.
-
-
-
Kaleeva reacted to Hardk in [Spain] Aitor Larrañaga
¡¡Photo Finish!!
Special Thanks
http://aquariumss.com/
-
Kaleeva reacted to Envious Mods in [USA] Calen Saddler
It Comes to an End:
I can't thank you all enough who have supported the "Replicant" case mod. I'm amazed at the amount of support and positivity that has been shared with me. This competition was quite the journey and seeing Replicant finished; I know the extremely long hours were worth it.
I manged to push myself further than i ever have before while assuring that every piece is clean looking and achieved at my high standards. I pulled off my goal to touch every single piece and mod it in one way or another. Everything was done in house and with my own hands; the end result is something I'm extremely happy with. Thanks again and make sure to place your vote!
••Make SURE to VOTE for the Replicant CaseMOD Invitational build••
Thank You to our Sponsors!
Thermaltake - ASUS - AMD - Plextor - Gskill - ROG - Luxa - TT Esports
A massive thank you goes out to our Sponsors as the Replicant case mod wouldn't have been possible without them! Thermaltake also did a great job helping us all out with anything we needed. They have some wonderful employees that truly love the sport of Competitive Modding!
Hardware Specs:
Motherboard: Asus X470 Crosshair VII
CPU: AMD Ryzen 2700
Graphics Card: Asus Strix GTX 1070
Ram: Gskill RGB TridentZ DDR4 (16gb)
Storage: Plextor 512gb NVM PCIE SSD
Power Supply: Thermaltake iRGB 850w
Cables: Lian Li Strimer & Thermaltake black and white sleeved extensions
Fans: Thermaltake 120mm Trio RGB, Ring Plus & Pure Plus.
Accessories: TT Lumi Plus addressable leds strips, 5" touch screen monitor, vandal switch
Watercooling: Thermaltake D5 dual pumps, 4 X reservoirs, 480mm copper radiator, 4 X 120mm radiators, Pacific W4 Plus CPU block, GPU waterblock, 2 digital led controllers, Sync controller, 2 X inline digital temp sensors and white 16mm C-Pro fittings
Final Photos & (Video Coming soon):
The Replicant (Blade Runner 2049) Final Video:
Final Replicant CaseMOD Invitational Video:
-
Kaleeva reacted to RandomDesign in [Germany] Monia Reuter
looking good. Waiting to see all assembled.
-
Kaleeva got a reaction from Rob "Deblow" Deluce in [Germany] Monia Reuter
Tomorrow there will be the Final Pictures
Here the switch for the eyes of the Gargoyle.
And the finished Gargoyle. Because of the long drying times, I had already considered that it will not be finished in time.
-
Kaleeva reacted to ESWE in Prediction Voting Event
All the mods are amazing, from the first until the last but there is a thing that concerns me.
If the event is sponsored by all this brands, why in some mods some people have better hardware than others?, Isn't it fair? If everyone is competing with the same sponsors, everyone should have the same hardware, this is what I think, otherwise is favoritism. I noticed several differences with the graphic cards...
Regards and congratulations for the competition, I'm following since it started
-
-
-
Kaleeva got a reaction from Mathias in [France] Moulard Mathias
wow that already looks really good. and you are so wide with your project O_O
-
-
-
Kaleeva got a reaction from Hardk in [Germany] Monia Reuter
Something has happened again =)
I painted two of the three side panels and glued them to the glass panes with double-sided self-adhesive foil.
There is also a diffusion foil from the inside so that the light is spread better and the LED dots are not visible.
Then I swapped the transparent connectors of the two pumps for black and sleeved the cables in one. So that the whole optical fits better, the pump has also got a stone look with EVA Foam.
The power supply has also arrived today, but has to wait a bit until it is allowed to move into the case
And last but not least the Gargoyle got LED´s into his eyes. The power source is a battery compartment of an old LED light chain.
The eyes are being covered so you don't see the LED´s any more.
-
Kaleeva reacted to KnThrak in Prediction Voting Event
Has to be Monia - not enough Gargoyles around these days. I've been trying to find one for our house and none of the potteries have them anymore.
-
-
-
Kaleeva reacted to AlexTt in Prediction Voting Event
Ladies are rare guests, my voice for Monia Reuter [Germany] ;)
-
Kaleeva got a reaction from Hardk in [Germany] Monia Reuter
Continued on the mainboard tray.
It is currently in powder coating.
Also the EVA foam parts continued, I started to make the whole look old. You can't see it so good in the photos, but if the color is on it, it gets better.
-
Kaleeva got a reaction from Hardk in [Germany] Monia Reuter
Currently I am working on the EVA foam plates for the glass parts.
The case still not arrived, but the rough measurements are known and so i started the parts.
I just made it a little bigger on the sides, so I can adjust it later and cut it to fit.
As you can see, there are many details and it takes so much time.
I've already started all three parts, but none of them are really finished. There will also be pictures at the next post.
When everything is glued and cut, the details come to make it look like a ruin.
Edit: i don't know why, but the order of the pictures is wrong
-
-
Kaleeva reacted to IuliaGz in Pre Event Predictions
lets hope that Monia Reuter wins and will inspire other females to participate too
-
-