-
Forum Statistics
8.2k
Total Topics53.3k
Total Posts -
Member Statistics
136,407
Total Members16,800
Most Online
TT James
-
Posts
162 -
Joined
-
Days Won
9
Content Type
Profiles
Forums
Downloads
Events
Gallery
Blogs
Posts posted by TT James
-
-
Here are some of my personal favorite white cases:
View 51 TG snow ARGB
https://www.thermaltake.com/view-51-tempered-glass-argb-snow-edition.html
Divider 500 TG snow ARGB
https://www.thermaltake.com/divider-500-tg-snow-argb-mid-tower-chassis.html
Divider 300 TG snow ARGB
https://www.thermaltake.com/divider-300-tg-snow-argb-mid-tower-chassis.html
-
9 hours ago, lillois said:
hi all,
it's my first experience with thermaltake products and i am a little disappointed.
i bought a V250 TG ARGB delivered with 3 fans TT-1225 ARGB. These 3 fans are raccorded on the driver card of the chassis.
my motherborad is a gigabyte B560M DS3H. i connected this driver card (M/B IN pin) to the Adressable LED connector 5v of the motherboard.
problem : RGB FUSION dont see the fans and i cant control colors ...
i added a watercooling thermaltake TH240 ARGB sync and connect it to the LED OUT pin of the chassis card.
all fans are synchronized (chassis fan, watercooling fan) with same color but cant control and change it with motherbord 😞
anyone have a solution ? cant see where is the problem ..
thx a lot
Hello Hello
PM you and let's discuss this issue.
-
On 11/19/2021 at 11:59 AM, toblerone567 said:
On my v250 case, only the middle fan RGB is working, I have plugged in the reset switch, SATA power, and the fan cables. Even after software installation they do not work, and I cannot control the RGB lighting from system
Specs:
Ryzen 2600xAsrock b450m pro 4
Cooler master 212 dark rgb
Gigabyte Windforce 770
Thanks in advance!
Could you control the lighting via the R button?
and could you please take a picture of your control board?
thanks
-
On 11/20/2021 at 4:28 AM, Speeed said:
I need to complete a thorough cleaning, and I for the life of me cannot figure out how the front panel can be removed. I did search, but I only found reviews and nothing in regard to the front panel removal. I do have a few ideas on how this might be accomplished, but I don't want to force anything.
Thanks for any help.
Hello
There's a cutout in the bottom of the front panel. Pull it out. Carefully.
-
52 minutes ago, Kermit said:
Anyone know where I can find a replacement part for my TT Core P3? I need a new reservoir support bracket.
Hello Hello
PM u for more details.
-
-
On 9/28/2021 at 10:32 PM, Ray Stanley said:
Update !!! Thermaltake have just contacted me to arrange delivery of these parts !!! thanks to Thermaltake.de !!!
AWESOME!
-
2 minutes ago, Brendan Mulqueen said:
Is there anywhere that sells the old view 21? It seems to be the only case I could find with dust protection for the power supply which I need. Thank you for your time. Brendan
Hello Hello
where you at? I could check for you.
and you mentioned "the dust protection for power supply" you mean the full length power cover?
-
On 9/4/2021 at 7:58 PM, docgogo2 said:
I have a thermaltake level 20 MT ARBG i want to put a AOI cooler which thermaltake or other brand should I use so it can connect with the other ARBG inside the case. I apologize if this is the wrong place or has been answered previously . thanks
Hello Hello
"other ARBG inside the case" means the ARGB fans come with the case?
if so, you have to choose the AIO from Thermaltake to sync with the fans.
-
8 minutes ago, longday said:
Is there anyway to control the lighting without an RGB port?
you should able to control the lighting via the R button on I/O port.
-
Hello Hello
for the ARGB case, you cannot control the lighting via TT RGB Plus software.
you gotta connect the ARGB control board to your ASUS motherboard and control the lighting via ASUS AURA.
-
12 hours ago, PatrickG77P said:
I have a Thermaltake View 51 case that came with 2 200mm and 1 120mm case fans and 1 controller. The controller has 6 pin connectors for fans. I have to add 6 fans for radiators and 3 argb waterblocks for CPU,GPU and Distro plate. The controller has only one available connector for another fan so I will have to add a controller. Can I get rid of the controller that the case came with and replace with another controller with more connections as I am trying to clean up any unnecessary wiring. All the controllers that I see for sale have 4 pin connections or other types. Do I have to replace my fans that came with the case to something compatible or am I forced to keep controller that case came with and somehow connect another controller to that one to control the additional 9 argb devices. Thanks for any help I am trying to learn as I go building my first PC but I am not finding alot of information out there on this subject.
Patrick
Hello
what kind of ARGB components do you plan to buy for you system?
for the control board comes with ARGB cases, it can support up to 90 ARGB LEDs. and each of the ARGB fans that pre-install in View 51 comes with 9 LEDs.
if you choose other ARGB components from Thermaltake, you gotta keep an eye on this issue. you may need to connect other control box that come with other components.
Or if you plan to have all other ARGB components from other brands, you may have to remove the original ARGB fans in the case.
you cannot connect the pre-install fans with others' ARGB fans or waterblocks.
-
10 hours ago, IanGrimmy said:
I am in desperate need of a replacement fan bracket for the 3 side fans on the thermaltake level 20 HT chassis.
How can I get one?PM you
-
On 8/10/2021 at 5:31 AM, Mysmu2 said:
Hello, I am cutting a distorted plate for the view 51 case. It will be a very close tolerance fit and I am wondering if I can get a CAD file of the chassis itself to model the plate inside of for correct port positions. Anybody know of a resource for this? Only looking for CAD file, not alternatives or “why not just’ s…”. thank you!
sounds interesting! PM u
-
8 hours ago, justintylerwright said:
Is there a way to remove the front panel on the View 51 in order to clean the dust off the inside of the tempered glass? I understand the actual glass is stuck with double sided tape and would be difficult to reattach.
u gotta remove the top panel first, then pull the front panel up.
-
On 8/3/2021 at 5:18 AM, DangWng said:
My computer was built by a different company, and when it came, the cable labeled "For M/B" was missing. I've contacted them multiple times about this, and the wrong cable has been sent to me twice, and I've gotten the idea that that's all they have. I can't find this cord anywhere online, and I'd rather not buy a new fan hub just to connect my lights to my motherboard. Can anyone help me?
Hello
which motherboard do u have on hand ?
and could you please take a picture of your ARGB control board?
James
-
On 7/29/2021 at 7:17 AM, AverageJoe said:
Bump. I really need this. Can I order a replacement somewhere?
I got you! check the inbox
-
37 minutes ago, mrnalgas said:
Hello everyone,
I apologize if this isn't the correct spot to place this thread and if so please direct me where to move it.
I'm new to building my own rig. I did build one years back with a friends help and he basically did everything while I watched and tried to learn and he walked me through stuff.
I've really been wanting to build my own again because I'm looking to upgrade my system. I haven't got a new rig in awhile so price isn't too much of a concern at this point.
I really like the look of the View 71 Tempered Glass ARGB.
My proposed build is as follows :
- Thermaltake View 71 Tempered Glass ARGB
- Intel i9-11900K
- MSI MPG Z590 Gaming Carbon Wifi
- EVGA GeForce RTX 3080 Ti FTW3 Ultra
- G Skill Ripjaws V Series 32GB (2x16) DDR4 4000 CL14 (appears that i can run this at the 4000 on 1 dimm 2 rank setup according to mobo manual I read)
- EVGA SuperNOVA 1000 G5 80 Plus Gold 1000W Fully Modular
- Western Digital WD Black SN850 NVMe M.2 2TB
- Thermaltake Floe DX 360 Triple Riing Duo Intel Liquid Cooling AIO
I've tried to do a ton of research and from what I can tell the case will fit the motherboard no problem. Video card will fit. Power supply will fit. Radiator will fit.
I'm thinking of doing the vertical install on the video card (noticed that I will need a Thermaltake riser cable in order to do this) as well as doing the right side vertical install of the radiator.
The case says that it comes with 3 fans and I don't believe they are the Riing fans that come with the AIO so I have thought about getting a 3 pack to replace those so that they match.
I have looked at sleeving the power supply cables and I know that I will either need to do it myself or buy the pre sleeved cables that are compatible with the power supply.
I'm wondering :
- If the setup that I've proposed will fit together as I've read and believe that it will
- If you have ideas to change anything
- Will I need to order additional cables (for fans and what not - I don't believe so because I'm pretty sure the fans I would order would have everything that I needed in pack)
- Would I need to order additional cables to hook up the audio and USB ports on the front of the case (I think they come with the case and just need plugged into MOBO)
- Do people sleeve cables other than just the power supply - I haven't seen kits other than power supply I don't think
I'm pretty nervous about pulling the trigger although I know I could do it with the proper time set aside.
I apologize if this is too much; but, I'm really looking for some advice.
Thank you all.
Hello Hello
this is definitely one of the right place to discuss about your build.
and also, I would recommend you a Facebook page which is also a perfect place you could ask any kind of question of your buid.
https://www.facebook.com/groups/Thermaltake
and for View 71 ARGB, it comes with 3 ARGB fans at front and the mobo you choose can also support 5V ARGB.
why don't you choose the AIO that comes with ARGB fans as well? Maybe TH360 ARGB from Thermaltake?
so that you could sync all the lighting effects via the software.
and there are cables for the I/O port form the case, you just need to pug them into mobo.
-
6 hours ago, Crank090865 said:
Hi,
What brand or brand range is recommended for fitting into a P3 case or chassis?
As I have been told that the cooling pipes on my newly purchased Corsair H100x (240mm aio) aren’t long enough to reach and fit to the cpu when the mobo is fitted into the case.
Hello
thanks for choosing the Core P3.
you could definitely try to get the AIO from Thermaltake as well either 240mm or 360mm.
since the tube is 400mm long for most of the AIO series which is a bit longer than the one you have on hand.
thanks
-
3 hours ago, justintylerwright said:
Hello all!
I was wondering if there was a way to get the front glass off of the View 51 Tempered Glass Snow ARGB Edition for cleaning purposes? Any help would be appreciated and i dont want to break something trying to force it. Thanks!
Hello
Just curios which do you wan to clean that you have to remove the glass at front? the glass itself?
the tempered glass is stuck at the front panel by a special double-side tape.
I would not recommend you to remove the glass since I cannot promise you that if you could stick it back "securely" after cleaning.
James
-
On 7/17/2021 at 11:26 PM, Maxim Dikun said:
Hello! According to the instructions for my case, to control the addressable lighting, you need to connect the cable to the motherboard from the built-in controller.
For a gigabyte motherboard, you need to use an VDG connector cable which is not on my board (B550 ELITE v2 have only D_LED1 (for 5V), LED_C1 (for 12 V)).
I took the "E" type cable (look at the photo 3) and plugged it into connector M/D-IN of the controller. The cable itself is connected to connector D_LED1 on the motherboard.
As a result, in RGB Fusion, I cannot control the illumination of the front fans: firstly, their brightness has become very low, and secondly, choosing the desired color - the fans turn on the absolutely opposite color. For example, the general red illumination is on, and the case fans are glowing blue, and so on.
How to solve this problem?
Case: Thermaltake Level 20 MT ARGB + 3 fans
MB: GIGABYTE B550 AORUS ELITE V2
PM YOU
-
57 minutes ago, frozensun said:
Hi TT,
How do I use your app to control the fan speed,lighting etc..?
I installed app and when I run it I got this on a picture below.
I have TT View 91 TG RGB chasis.
Hello
you gotta make sure your phone connect to the wifi in the same domain with your PC
then, click the refresh. should be alright.
kindly check the manual of the RGB plus below
-
On 6/18/2021 at 6:37 PM, Napalm_Death said:
Hey everyone, so i finally upgraded my i3 3240 pc to an Ryzen 7 1700X, an family friend gave me this case & installed the new upgrades into it, its the full sized version. I'm asking cause he didn't do cable management so someone on reddit recommended i should find out the case model and then ask people with the same case how they did there's so it looks clean, I'm also planning on installing two fans as i currently have an small 80mm fan from my mid size case so as you can imagine, its a bit underpowered for the case's size
Wow, it's V2 S from 2011.
if you would like to add extra fans, you could have one 120mm fan at front for air intake.
and what do you want to know about the cable management?
-
On 6/12/2021 at 12:21 AM, Teaswiz said:
Hi TT community!
I'm on a mission to perform a mod on my core P8, the key piece is obtaining a front panel fan bracket, does anyone happen to not plan on using theirs and willing to part with it? Photos of the exact part I am looking for! Seems buying a whole new case and RMA are the only official ways to obtain it 😭
PM u
View 71 Bottom fans.
in Chassis
Posted
Hello
the RED i marked in picture is where you mount the 2 120mm fan at the bottom of View 71.
you gotta remove the bottom filter first to secure the fans from the bottom of the case.