Matthewbib

I have the Black Element mouse, which I have the latest software for, and have used the double clicking fix for. Currently, whenever I use the forward and backwards buttons on the mouse, a red symbol will appear at the bottom of my screen. This will cause some fullscreen games to minimize, and I was wondering how to disable it.

I also have the Theron, which has the option to disable OSD by right-clicking on the icon in the quick launch bar.
 
Windows 7 x64

Set it and leave it. So much easier than finding that damned cord.

I am planning a new build with the Core X9 Snow Edition case.(when available)  AKA "Artic Tiger"
Intel 4790K
ASUS Sabertooth Mark S Z97 mother board
MSI Gaming 7 GPU (repainting the shroud)
NZXT HALE90 V2 1200 WATT
HyperX White 32 GB DDR3 1866
XSPC D5 pump
Alphacool 2 - 480 - 45mm radiators
PETG 1/2"x3/4" hard tubing
Bitspower G1/4 Male to Male extension.
250 ML resevior with a D5 pump
10 White low speed PWM fans
 
I am using the big tube and cutting the G 1/4 threads into the tube and screw it on the Male to Male extension fitting.
 
 
 
 

As referred to above, i have a Thermaltake cronos. Unfortunately i cant seem to get the mic working. My laptop only has a jack, so i got a headset adapter for it. I've plugged it in but it doesnt work. Below are the screenshots from device manager etc etc. It would be of great help if i can get the mic working. The headset is working fine. Thanks again =)
 


 

When do the Riing fans come out? The most specific information I was able to find in articles was "this week" and "the end of February". Well, today is the last day of February and I still can't find them anywhere.

Hello all, I'm hoping you guys can help me track down a problem with my L10.  I've had the case for a while now but have had continual issues with my HD dropping out from windows  (7, 64)  Here is what I've done so far:

I removed the power array cable to see if that would help, it didn't.  
Replaced the sata cable three times, no luck.
Relocated, swapped trays, and even replaced the drive itself, still no joy.


  At this point I'm thinking its either the physical connector between the cable and the trays or  a heat issue. I'm not super technical with hooking up the fans to the MB so I'm not sure how or, if I can speed up, the front fan.  By chance can I order/replace the connectors from the tray to the arrays?  

I'd really be bummed if I have to replace the case as I had some fun and had it professionally pin striped!