Wingfat

It was a pleasure to speak with you today.... Tonight I received the UPS label for shipment back to California. I have included a small section of tubing for your inspection.
Looking forward to reinstalling system.
 
Thanks again,
 
Jeff

It was a pleasure to speak with you today.... Tonight I received the UPS label for shipment back to California. I have included a small section of tubing for your inspection.
Looking forward to reinstalling system.
 
Thanks again,
 
Jeff

Final Touches... threw a GT-640 in there .."just" enough clearance.
 
Loading OSX 10.10.2  Yosemite...  For those not familiar with OSX... what your looking at is the Apple Welcome Screen. Absolutely no problem or commands needed... too easy. 

Final Touches... threw a GT-640 in there .."just" enough clearance.
 
Loading OSX 10.10.2  Yosemite...  For those not familiar with OSX... what your looking at is the Apple Welcome Screen. Absolutely no problem or commands needed... too easy. 

I did indeed turn the system vertical while filling and bleeding excess air. I would have preferred to orient the D5 vertically but there was little if any clearance to do so. Although ascetics is important to me function and performance are paramount.
 
Progress so far.... Dealing with microfoam. Put a few drops of cascade in the system. Pump was set at 5... had to turn it down to 2.

I did indeed turn the system vertical while filling and bleeding excess air. I would have preferred to orient the D5 vertically but there was little if any clearance to do so. Although ascetics is important to me function and performance are paramount.
 
Progress so far.... Dealing with microfoam. Put a few drops of cascade in the system. Pump was set at 5... had to turn it down to 2.

I started to build a system featuring the RL-240 Water Cooling Kit and the amazing Core V21 case.
 
For a while I had a problem figuring out just where and how to mount the large pump/reservoir. I did a bit of custom mounting... easy... just a few holes...
so I've decided to share the build up to this point. I have a few 90 Degree fittings on order to make my life a bit easier...
 Note: You can even adjust the pump speed easily as the adjustment dial is exposed thru a cutout in the front (already available).
The mount for the far end of the reservoir is made from 2 old expansion slot covers. Edit: Now Painted Black.

Once again please forgive my lack of knowledge concerning certain aspects of this hardware. The inclosed documentation is a bit sparse. 
My question concerns the top of the PT40-D5 and which port to use for filling and tube hookup. Does it really matter which one I use for the tube hookup? In my orientation the port with the plastic tube is on the bottom of the tube. I'm thinking it would be better to use this port for the return flow?
Please advise... Thanks!

Oh my.... Thats kind of scary. Hope Thermaltake helps you out.. The crack seems to have originated at the pre drilled hole.... Did you perhaps try to screw anything into it? 
You have just convinced me to run my system for a full week before supplying power to the motherboard and other peripherals.
 
A few years back I had a Zalman Reserator XT  which sat on top of my PC. After 2 years it leaked into my system destroying it. It's taken me a long time to venture back into water cooling. I have checked my PT40-D5 and seems fine.... I won't be checking for leaks till late next week after some 90 and 45 degree connectors arrive. I want to reduce any excess strain on the tubing as possible. Please let us know how Thermaltake responds to this problem.

I started to build a system featuring the RL-240 Water Cooling Kit and the amazing Core V21 case.
 
For a while I had a problem figuring out just where and how to mount the large pump/reservoir. I did a bit of custom mounting... easy... just a few holes...
so I've decided to share the build up to this point. I have a few 90 Degree fittings on order to make my life a bit easier...
 Note: You can even adjust the pump speed easily as the adjustment dial is exposed thru a cutout in the front (already available).
The mount for the far end of the reservoir is made from 2 old expansion slot covers. Edit: Now Painted Black.

Newegg is sold out on the RL-240 Kit...
 
Anyone know of another source (in stock) or when they might be re-supplied?
 
Thanks (: