ShadoWx3Sandy Posted April 29, 2015 Report Share Posted April 29, 2015 Hello everybody, my name is Fabian Schweiger, I'm 24years old and I'm living in Germany. this project will be my first big project. I'm atm in the planning phase. but i have made 4 Sketches from my idea of what i wanna do. i wil update this thread as soon as possible after made some new progress in that Casemod. but i can you tell exactly witch Hardware it will get. Case: IKEA Kallax 4cage modded MoBo: Asus Z97 Sabertooth Mark1 or Z87 Sabertooth CPU: Intel Core i5-4690K or Intel Core i7-4790K GPU: Asus StriX GTX970 RAM: 16GB Avexir Raiden Series DDR3-2133 PSU: modded Tt Grand Platinum 850W FANs: Tt Riingfans 120mm white led Watercooling: sponsored by Thermaltake Dual Loop System with 2 560mm Radiators I'm really excited to show you everyone, what i have planned and how it's going it's way from the start to the End. Also here are my First Sketches where you can see what i've planned to do and also you can see the Case, the Picture is from Google. but i have it already here. EkbergDOF, Tt Shannon, angeliand16 and 4 others 7 Quote Link to comment Share on other sites More sharing options...
Tt Andy Posted April 29, 2015 Report Share Posted April 29, 2015 Nice idea! i have actually never seen anything like it! cant wait to see the progress ShadoWx3Sandy 1 Quote Link to comment Share on other sites More sharing options...
Tt Shannon Posted April 29, 2015 Report Share Posted April 29, 2015 Pretty awesome dude, i like the out of the box thinking.... Really looking forward to see how this comes out. ShadoWx3Sandy 1 Quote Link to comment Share on other sites More sharing options...
ShadoWx3Sandy Posted May 10, 2015 Author Report Share Posted May 10, 2015 Today i can annonce that all cables will be sleeved from Sascha Moeske aka http://modworkx.de/. follow him on Facebook under Modworkx the next days i will also announcing a new changed sketch, but first we will nedd the time to lay down our new flooring in the new apartment before i can start working on my project,also I'm helping my wife do find and plan her own casemod featuring the Thermaltake Core V21 Case Quote Link to comment Share on other sites More sharing options...
ShadoWx3Sandy Posted May 17, 2015 Author Report Share Posted May 17, 2015 today i'm uploading an improve sketch from the interior i only need to think about how and where i will put the SSD's and witch Mainboard will be used. the rest will stay like you see on the sketch. soon i will start working on the case to put in some modifications for the hardware. Quote Link to comment Share on other sites More sharing options...
AlShuryan Posted May 23, 2015 Report Share Posted May 23, 2015 Better each time... Good timing with Thermaltake announcing the Hardline PETG tubing and fittings... ThermalMike and ShadoWx3Sandy 2 Quote Link to comment Share on other sites More sharing options...
Arcis Modz Posted July 8, 2015 Report Share Posted July 8, 2015 looking forward on this build. great concept. great idea. ShadoWx3Sandy 1 Quote Link to comment Share on other sites More sharing options...
ShadoWx3Sandy Posted July 13, 2015 Author Report Share Posted July 13, 2015 the first steps are done today. now we have a 2 hrs time of beeing silence so i needed to stop working but i have changed a first thing on the Kallax Casemod. I have made my own Motherboard tray some other things i will update today after the 2 hrs break. also i received on friday my first package from Thermaltake =) nice stuff so far ThermalMike 1 Quote Link to comment Share on other sites More sharing options...
ShadoWx3Sandy Posted July 22, 2015 Author Report Share Posted July 22, 2015 Hey fellows =) today i had some time to upload some new worklog photos =) i did the first Connectiontube fitting two more will follow, but i missing some new tools for a faster work so i need to improve and do it on another way i planned. Also i changed the Position of the hole system, like you can see on the pictures. but i hope it will be a pleasure for you watching them =D feel free to say your things what you're thinking and having in your mind =) ThermalMike 1 Quote Link to comment Share on other sites More sharing options...
ThermalMike Posted July 23, 2015 Report Share Posted July 23, 2015 Now that's a radiator, I mean radiators XD ShadoWx3Sandy 1 Quote Link to comment Share on other sites More sharing options...
ShadoWx3Sandy Posted July 27, 2015 Author Report Share Posted July 27, 2015 some new pictures =D the next few weeks i can't do so much, cause we have a much to do with our upcoming apartment change stay tuned. ThermalMike 1 Quote Link to comment Share on other sites More sharing options...
ShadoWx3Sandy Posted July 27, 2015 Author Report Share Posted July 27, 2015 Now that's a radiator, I mean radiators XD oh yeah the are really huge, but not huge enough to file out the complet side i would have space for a 700mm radiator but then it would be no more space to the top and bottom ThermalMike 1 Quote Link to comment Share on other sites More sharing options...
ShadoWx3Sandy Posted August 5, 2015 Author Report Share Posted August 5, 2015 today i will upload my last update Photo for the next time. i need to stop working on it until we changed our apartement, no time for modding until now, cause i have to much things to do and so much to arrange for the change =D so stay tuned ThermalMike 1 Quote Link to comment Share on other sites More sharing options...
ShadoWx3Sandy Posted August 7, 2015 Author Report Share Posted August 7, 2015 here you can see the hole build Quote Link to comment Share on other sites More sharing options...
ShadoWx3Sandy Posted September 13, 2015 Author Report Share Posted September 13, 2015 The open parts in the right wall will be closed with the original parts, which I saved in our basement and later it will the entire interior covered with acrylic plates. Perhaps with a nice whetstone from Modworkx Please don't be mad with me for that bad look atm it's my first casemod. We found some time to bend the tubes. I haven't any tools for it, only a siliconfulltube from Monsoon and my Heatgun I know it's not perfect but for the first tries, I think the, are quite good I did some bad angles for bending but found a way to do it and everything fit perfectly, even it's not looking like that Now I need to wait for money to buy a new GPU, perhaps I will find some time and money around Christmas Quote Link to comment Share on other sites More sharing options...
ShadoWx3Sandy Posted November 11, 2015 Author Report Share Posted November 11, 2015 i have some updates done =) thats the final design, how it will be builded up. but it will be improved more and more every day. today i got the message from MSI, that I will getting a MSI Z170A Gaming Pro Mainboard for Project Kallax. feel free to comment Quote Link to comment Share on other sites More sharing options...
ShadoWx3Sandy Posted November 30, 2015 Author Report Share Posted November 30, 2015 i know its a bit weird with me but i changed it again, but this time it will stay at these Design, but it will be improved over the next few months to get the perfect matching of color style and performance =) also i need to thanks Modworkx https://www.facebook.com/Modworkxfor his help =) he repainted my DPS G 750W PSU and will doing some custom sleeves =) Quote Link to comment Share on other sites More sharing options...
ShadoWx3Sandy Posted December 26, 2015 Author Report Share Posted December 26, 2015 My Actually Stand from Project Kallax is this one =) it has changed some things but i'm needing to wait for my acrylic plates, which will be done custom made for me. to hide the radiators on top and having some special waterflowing ways in them =) also i received my Sponsoring Packet from KLEVV with a quadkit of DDR4 Cras dimms. two dimms with red light and two dimms with white light combined with two 240GB SSD's from them.don't worry about the pictures. they sended me 2 kits with red dimms and 2 kits with white dimms instead of one kit with 2 red and 2 white dimms. The rest of the Kits will going back to them. Quote Link to comment Share on other sites More sharing options...
ShadoWx3Sandy Posted January 18, 2016 Author Report Share Posted January 18, 2016 Hello Guys, i know its been a while since my last post. but today i can post a new sketch drawing, which will show the end result =) i only need to attach mainboard with gpus , liquid cooling loops and the rams =) hope you guys will like it. Quote Link to comment Share on other sites More sharing options...
ShadoWx3Sandy Posted February 15, 2016 Author Report Share Posted February 15, 2016 Hello Guys =) my actually stand of project kallax and the next steps what i will doing. its time to create the cover for my skeleton. it will getting a complet acrylic body with an unique foil design on it. stay tuned for more stuff =) The Specs so far:Mainboard: MSI Z170A Gaming PRORAM: KLEEV CRAS DDR4-2133 4x4GB mixed 2xred 2xwhitePSU: Thermaltake DPS G 750W (painted in white)SSD: KLEEV URBANE 2x240GBCPU Block: Thermaltake W2Pump: 2x Thermaltake Pacific PT40-D5 w/Mod KitRadiator: 2x Thermaltake Pacific RL560 RadiatorFans: 16x Thermaltake Riingfans (5xorange 5xgreen 2xred and 2xblue)GPU: i'm waiting for my reply from KFA2/Galaxy about there Hall of Fame Series Quote Link to comment Share on other sites More sharing options...
ShadoWx3Sandy Posted March 14, 2016 Author Report Share Posted March 14, 2016 today i'm posting another update. the System is already hanging on the wall. on Saturday the CPU arrived. Its an Intel Core i5-6600k sponsored from Scan Computers UK ( scan.co.uk ) and Shailendra Shelly Raja from Scan Computers UK. now its time to wait for the gpus arriving and the inner AcrylicCover to getting complete :> i hope i will be finishing it in the next months to have everything fitting =D Quote Link to comment Share on other sites More sharing options...
ShadoWx3Sandy Posted May 3, 2016 Author Report Share Posted May 3, 2016 I have done some more stuff at the last days. its not so much, but the time at the moment is completly getting used by our 2 weeks old daugther, who needs to stay at the hospital for a longer time, cause she was born 6 weeks to early. but i hope you will like my newest progress. i only need to wait for the last pieces of my parts and then i can finally build it to the final result. stay tuned. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.