bwn2pwn Posted November 10, 2015 Report Share Posted November 10, 2015 Good day all, I have an Armor Revo Snow Edition Chassis, for about 2 years now.I noticed that after a LAN, and setting up my PC again, that the Front Intake 200mmx200mmx30mm Blue FAN and Top Out take 200mmx200mmx30mm Blue FAN had were not working. I plugged both individually into a single awkwardly located spare header on my motherboard (MSI Z87 M-Power Max) to test if the fans were the issue. Both worked perfectly when connected directly. I then inspected the control circuit hidden inside the top hatch of the PC where both these fans are controlled and powered from (High Speed/Low Speed/LED ON/OFF). I noticed several blown surface mount resistors and a few IC's. The control PCB is quite small maybe 100mmx25mm. Is it possible to procure just this PCB from Tt as a replacement or how should I go about resolving this issue. (currently just the intake fan is hard wired to my MoBo to get some internal air circulation). I can attach pictures if necessary. Please request if it will help. Regards, bwn2pwn Quote Link to comment Share on other sites More sharing options...
DarkwinterRB Posted December 11, 2016 Report Share Posted December 11, 2016 Good Evening! Same Problem here!!! I had contacted TT support already! Waiting the response. Did you solve your problem? Quote Link to comment Share on other sites More sharing options...
Juangmv2000 Posted May 14, 2019 Report Share Posted May 14, 2019 On 11/10/2015 at 2:05 AM, bwn2pwn said: Good day all, I have an Armor Revo Snow Edition Chassis, for about 2 years now. I noticed that after a LAN, and setting up my PC again, that the Front Intake 200mmx200mmx30mm Blue FAN and Top Out take 200mmx200mmx30mm Blue FAN had were not working. I plugged both individually into a single awkwardly located spare header on my motherboard (MSI Z87 M-Power Max) to test if the fans were the issue. Both worked perfectly when connected directly. I then inspected the control circuit hidden inside the top hatch of the PC where both these fans are controlled and powered from (High Speed/Low Speed/LED ON/OFF). I noticed several blown surface mount resistors and a few IC's. The control PCB is quite small maybe 100mmx25mm. Is it possible to procure just this PCB from Tt as a replacement or how should I go about resolving this issue. (currently just the intake fan is hard wired to my MoBo to get some internal air circulation). I can attach pictures if necessary. Please request if it will help. Regards, bwn2pwn Quote Link to comment Share on other sites More sharing options...
Juangmv2000 Posted May 14, 2019 Report Share Posted May 14, 2019 On 11/10/2015 at 2:05 AM, bwn2pwn said: Good day all, I have an Armor Revo Snow Edition Chassis, for about 2 years now. I noticed that after a LAN, and setting up my PC again, that the Front Intake 200mmx200mmx30mm Blue FAN and Top Out take 200mmx200mmx30mm Blue FAN had were not working. I plugged both individually into a single awkwardly located spare header on my motherboard (MSI Z87 M-Power Max) to test if the fans were the issue. Both worked perfectly when connected directly. I then inspected the control circuit hidden inside the top hatch of the PC where both these fans are controlled and powered from (High Speed/Low Speed/LED ON/OFF). I noticed several blown surface mount resistors and a few IC's. The control PCB is quite small maybe 100mmx25mm. Is it possible to procure just this PCB from Tt as a replacement or how should I go about resolving this issue. (currently just the intake fan is hard wired to my MoBo to get some internal air circulation). I can attach pictures if necessary. Please request if it will help. Regards, bwn2pwn Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.