10uR Posted July 23, 2023 Report Share Posted July 23, 2023 does anyone have this problem. When I unplug and plug the usb cable, it fixes and starts again. Quote Link to comment Share on other sites More sharing options...
TT Hank Posted July 24, 2023 Report Share Posted July 24, 2023 Dear 10uR, Could you help check whether the LCD's default display is normal when the software isn't turned on? If the default display works properly, then it might be a software problem. Looking forward to your reply soon. Quote Link to comment Share on other sites More sharing options...
10uR Posted July 24, 2023 Author Report Share Posted July 24, 2023 sometimes the default screen has the same problem. I sent it to the service and they couldn't find a problem. When I disconnect and reconnect the cable, it fixes itself. Quote Link to comment Share on other sites More sharing options...
TT Hank Posted July 25, 2023 Report Share Posted July 25, 2023 Dear 10uR, Does the default screen have the same problem when the PC is shut down? If yes, then it isn't a software problem. Could you please help to monitor these days? Thank you. Quote Link to comment Share on other sites More sharing options...
10uR Posted August 4, 2023 Author Report Share Posted August 4, 2023 Sevgili TT Hank Bilgisayar kapatıldığında varsayılan ekranda aynı sorun ortaya çıkıyor. Fakat pc biostan kapanınca usbyi devre dışı bırakınca pcyi yeniden başlattığımda düzeliyor. Bilgisayar 4 saatten fazla açık kaldığında aynı sorun tekrar başlıyor. Quote Link to comment Share on other sites More sharing options...
TT_Cooler Posted August 9, 2023 Report Share Posted August 9, 2023 Dear 10uR, It seems the LCD does have this issue under some scenarios. Please contact our customer service for RMA Service. https://support.thermaltake.com/RMA_Agreement.aspx and report your condition as detailed as possible. Thank you. Quote Link to comment Share on other sites More sharing options...
Razer_Lavathian Posted October 17, 2023 Report Share Posted October 17, 2023 Mine just started 2 days ago, iv tried reinstalling just about everything. When im just using the internet it looks like this but when im gaming it looks like your pic. and im using a gif so its like 10x worse. PLEASE HELP US!!! Quote Link to comment Share on other sites More sharing options...
SpicySicilian Posted December 13, 2023 Report Share Posted December 13, 2023 (edited) I too am having the same issue with my 360 LCD screen. The first few times open the software would fix it, but now it has grown worse, I'd say probably 45% of the screen is freaking out. However it doesn't seem to grow worse as the PC is on, occasionally appears to self-heal, then revert back to the issue. I can't tell if this is a hardware or a software issue, but given I'm encountering a forum thread about this problem, I take it isn't rare. I'll try rotating my orientation of the screen to see if the problem follows the orientation of the screen or if it follows the orientation of the image. Edit: It does not follow image orientation. Second Edit: Update, the glitched portion of the screen DOES rotate (rotates orientation of the gif within the glitched section). If I could get a tech to respond to this thread, that would be awesome. I'm now under the suspicion that the issue is a software issue and not a hardware issue. I'd love to see some attempts to see if it is and to see if a software update could be a fix rather than having to completely disassemble my build to RMA a screen that isn't actually broken. #### if it is the screen and if I could replace the screen without pulling the whole cooler, that would be even better. Edited December 24, 2023 by SpicySicilian Tested to see if problem followed image or follows screen orientation. Quote Link to comment Share on other sites More sharing options...
hawtdogflvrwtr Posted December 17, 2023 Report Share Posted December 17, 2023 Just return it and get the nzxt. It's a far better product with better support and software that doesn't look like it was written by kids in the 90's Quote Link to comment Share on other sites More sharing options...
SpicySicilian Posted December 24, 2023 Report Share Posted December 24, 2023 On 12/17/2023 at 8:44 AM, hawtdogflvrwtr said: Just return it and get the nzxt. It's a far better product with better support and software that doesn't look like it was written by kids in the 90's I've had Thermaltake products for the better part of 7 almost 8 years. For some of the fans in my current case, I kept all the original wiring and was able to reuse 8-year-old fans and be able to control the RGB with software. I'd agree, that for as large of a company as Thermaltake is, their software could be far better, and these are problems that could be solved by simply hiring some computer science majors. My last closed loop AIO Riing flow 260 lasted 5 years before having heat issues with my Ryzen 9 5900x. That's pretty solid. Why switch to a product you have zero experience with, have never owned any of their products, and do so purely on the words of others? Makes no sense. Quote Link to comment Share on other sites More sharing options...
SergeyS Posted April 28 Report Share Posted April 28 I have a same one. Found the way to fix? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.