Jump to content

Crysis Mod - Urban T81 (Tt Crysis)


Recommended Posts


Hi everyone, 
If you can remember, my previous mod was based on Assassin's Creed Game. So this time around I thought of going a bit to the future with a mod based on Crysis Game. 

This will have lot of work to do and will need lot of hours. So I expect this work-log to go on for few months.


First I must give a huge thanks to Thermaltake for encouraging me to do this mod.



This build would not become a reality if not for my Sponsors. So a big thank goes out to my sponsors.



Avexir is supporting this build with Blue Raiden DDR4 Memory sticks



Gigabyte is supporting this build with a X99 Gaming G1 WIFI Motherboard 



Nvidia is supporting this build with 2x GTX 980 Graphic Cards



Thermaltake is supporting this build with all the items listed below. 

1x   Thermaltake Urban T81

2x   Thermaltake Pacific PT40-D5 Silent Kit Reservoir/Pump Combo
2x   Thermaltake Pacific RL360 Radiator
1x   Thermaltake W2 CPU Water Block
2x   Thermaltake V-Tubler PETG Tube 5/8†(16mm) OD 500mm 4 Pack
8x   Thermaltake Riing 12 LED Blue
1x   Toughpower Grand 1200W
and dozens of Fittings needed for the loop.
I will be modifying the Thermaltake Urban T81 from ground up to facilitate a new component layout using materials like Acrylic, Aluminium and Steel. All the side, top and front panels will be made with acrylic sheets to carry the Crysis Game Theme. After assembling the whole case it will be airbrushed to give it the effects that are demonstrated in the pictures.

This mod will have a motherboard cover which will be controlled by a Raspberry Pie Micro-Controller using a 7" touch screen. Raspberry Pie will also control fan speeds, LED colors and other actuators for moving parts.


Main focus point of this mod was the holding facility where Crysis 3 game begins. So the airbrushing will try to demonstrate the looks of a old futuristic building. 



These are the 3D rendering of the mod. It should resemble these once completed.


Link to comment
Share on other sites

  • 2 months later...
hi Guys back again with the first update. sorry for the delay in this. trying to finish the build before May. 


Had to learn some programming and electronics to make the touch screen display. 

But here we go with the components that i will be using. 





24810553019_f943faf69e_c.jpgLogo by snjvirtual, on Flickr


25151756006_9c9657c882_c.jpgIMAG0079 by snjvirtual, on Flickr



Link to comment
Share on other sites

  • 10 months later...

Доброго времени Ñуток ПоÑмотреть тут eb.by/HpJ или здеÑÑŒ bit.ly/2kP0Myr

ОпиÑание фильма:

ÐмериканÑкие военные направлены в Китай Ð´Ð»Ñ Ð´Ð¾Ð±Ñ‹Ñ‡Ð¸ мощного оружиÑ. По прибытии на меÑто назначениÑ, они заÑтают китайÑкий народ за Ñпешным ÑтроительÑтвом огромной Ñтены, возвышающейÑÑ Ð½Ð° неÑколько деÑÑтков метров. Официально озвученной верÑией Ñтала защита от Ð½Ð°Ð¿Ð°Ð´ÐµÐ½Ð¸Ñ Ð¼Ð¾Ð½Ð³Ð¾Ð»ÑŒÑких орд. Военные предÑтавлÑÑŽÑ‚ÑÑ Ñ‚Ð¾Ñ€Ð³Ð¾Ð²Ñ†Ð°Ð¼Ð¸, прибывшими в Китай Ð´Ð»Ñ Ð¿Ð¾ÐºÑƒÐ¿ÐºÐ¸ товара. Однако им не верÑÑ‚, Ð¿Ñ€Ð¸Ð½Ð¸Ð¼Ð°Ñ Ð·Ð° наемных разведчиков, и заключают под Ñтражу. Ðо ночью американцам открываетÑÑ Ð½Ð°ÑтоÑщее предназначение гигантÑкой Ñтены – китайÑкий народ подвержен нападению армии жутких монÑтров. БезжалоÑтных чудовищ, Ñ ÐºÐ¾Ð³Ñ‚Ñми и клыками, против которых практичеÑки беÑполезны ножи и мечи. Чтобы защитить Ñвой народ, китайÑким главой было принÑто решение о ÑтроительÑтве прочной Ñтены, ÐºÐ¾Ñ‚Ð¾Ñ€Ð°Ñ Ð²Ñ‹Ð´ÐµÑ€Ð¶Ð¸Ñ‚ натиÑк Ñильных монÑтров. К выполнению Ñтой работы были привлечены вÑе дееÑпоÑобные жители КитаÑ. Однако, возведение Ñтены находитÑÑ Ð¿Ð¾Ð´ поÑтоÑнной атакой агреÑÑивных врагов, что не позволÑет доÑтроить её.



Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...