Rahul Das Posted March 30, 2017 Report Posted March 30, 2017 This Season I Votes and Support U. Last season I vote For Indian Modder Rakesh Sharma here his fb profile link https://m.facebook.com/profile.php?id=100005701206102&refid=46 . He is also modder As Hobbiest. Quote
Rahul Das Posted April 16, 2017 Report Posted April 16, 2017 I loved All Modders and This Season I check out All Modders Profiles Modded Cases and Finaly I Choose You Von Carlo Rasonabe Reapervon 1 Quote
Reapervon Posted April 22, 2017 Report Posted April 22, 2017 Project: Tt X ROG Mechanicore Hi guys! I'm Von Carlo Rasonabe A.K.A. Reapervon, I will represent Japan in this year's modding contest. I would like to thank Thermaltake Technology inc, especially to Andy Cheng and Kenny Lin for giving me the chance to be part of this competition, it's such a great honor! and also Thank you so much to all sponsors of this event!!! ASUS Reapublic Of Gamers, Thermaltake e-sports, Luxa2, V-color and Intel. My entry for this year's competition is inspired by the Mecha and I named it "Tt X ROG Mechanicore". Good luck to everyone! If you guys want to know more about me, here is my FB https://www.facebook.com/ReaperVon and my FB page https://www.facebook.com/ReaperVonMods/?ref=page_internal. Past project with Thermaltake Weapon of Mass Destruction Core P3 Archangel Versa N24 Trans-Reaper Lie, SgtT8ie, Rahul Das and 1 other 4 Quote
Reapervon Posted April 22, 2017 Report Posted April 22, 2017 On 4/16/2017 at 6:13 PM, Rahul Das said: I loved All Modders and This Season I check out All Modders Profiles Modded Cases and Finaly I Choose You Von Carlo Rasonabe Thanks bro! Rahul Das 1 Quote
Reapervon Posted April 22, 2017 Report Posted April 22, 2017 Let's start! The Tower 900 Rahul Das and SgtT8ie 2 Quote
Reapervon Posted April 22, 2017 Report Posted April 22, 2017 Removing the bottom panel. SgtT8ie, mhalhuphet and Rahul Das 3 Quote
Reapervon Posted April 22, 2017 Report Posted April 22, 2017 Installing sliding rails that will be used for the side weapon and radiators. Meet one of the best inspiration for this project I really like this robot and he will be the pilot of this project. ^^ DIY aluminum mounting bracket for the side weapon. I always like to use anything in modding as long as I like it, so I can create something cool that will make me happy. Here's a 3d printed weapon that will be modded later. ^^ Rahul Das and SgtT8ie 2 Quote
Reapervon Posted April 22, 2017 Report Posted April 22, 2017 I just installed 2 hinges at the back that will be used later. SgtT8ie and Rahul Das 2 Quote
Reapervon Posted April 22, 2017 Report Posted April 22, 2017 Here's the new look of my Tower 900. ^^ Stay tuned for more. Thanks! Rahul Das and SgtT8ie 2 Quote
Reapervon Posted April 29, 2017 Report Posted April 29, 2017 On 4/24/2017 at 6:54 PM, tantric said: nice one bro. GLHF! Thanks bro!!! same to you!!!! Quote
Reapervon Posted April 30, 2017 Report Posted April 30, 2017 Playing with the parts. This is the way I do mods, always love to play with the PC parts especially when I want it to be part of my design. I think I am very happy with what I've seen here, really love the ROG OC Panel and the Case Fan in front. Now, it's time to make a new front panel. Cutting and bending 3mm aluminum sheet for the case fan and ROG OC Panel mount. Rahul Das 1 Quote
Reapervon Posted May 1, 2017 Report Posted May 1, 2017 more inner frame SgtT8ie and Rahul Das 2 Quote
Reapervon Posted May 8, 2017 Report Posted May 8, 2017 Parts for this project thank you again Thermaltake! SgtT8ie and Rahul Das 2 Quote
Reapervon Posted May 9, 2017 Report Posted May 9, 2017 Using aluminum sheets and bars for the railgun frame and mounting brackets. Rahul Das 1 Quote
Reapervon Posted May 9, 2017 Report Posted May 9, 2017 Cut, bend and create the front panel. Aluminum materials will always be my favorite when it comes to semi scratch/scratch build. Quote
Reapervon Posted May 9, 2017 Report Posted May 9, 2017 I really want a Laser Cutter or CNC, but I still don't have the money to buy these machines and all I can do is to cut them all by a hand saw or by a scrollsaw, but I'm still happy with results. nKwoel and RVFER 2 Quote
RVFER Posted May 9, 2017 Report Posted May 9, 2017 3 hours ago, Reapervon said: I really want a Laser Cutter or CNC, but I still don't have the money to buy these machines and all I can do is to cut them all by a hand saw or by a scrollsaw, but I'm still happy with results. It's not the Laser Cutter or CNC, It's who's behind the MAGIC Rahul Das and Reapervon 2 Quote
Reapervon Posted May 10, 2017 Report Posted May 10, 2017 On 5/9/2017 at 6:22 PM, RVFER said: It's not the Laser Cutter or CNC, It's who's behind the MAGIC yeah so true hahaha I'll try my very best using my MAGIC! RVFER 1 Quote
Reapervon Posted May 14, 2017 Report Posted May 14, 2017 Now it's time for the gpu and pump mounting brackets! Rahul Das 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.