Goya Posted July 13, 2017 Report Share Posted July 13, 2017 Hey guys ! First of all, sorry for my bad english :] So, I bought 2x3 fans for my new pc case (H440). Since i'm a noob, I asked someone to install them. The guy did, and after the first test, only one of the two controller were actualy detected by the software. I tested everything (driver, cleaning, switching port) and even take my whole Pc to a professionnal who didnt found a problem at all. My MOBO is an Asus x99 Deluxe, everything is connected correctly since the non recognized fan are red and turn. What could be the problem ? If one of my controller dead, can i get another free of charge ? I'm already asking myself if I should return them and put on the basic case fan.. Thank for your future help ! Quote Link to comment Share on other sites More sharing options...
ThermalMike Posted July 13, 2017 Report Share Posted July 13, 2017 Did you check the dip switch settings for BOTH controllers? If they are both set to the same, only 1 will show up. Also, if above is not "it" test both controller separately, make sure they both work together. Then depending on result, check the connections, you can: 1. connect both controllers to the USB header cable that is included 2. Use the daisy chain cable and see if you get different result. (Try both of these if the top option is not it) keep us posted! Quote Link to comment Share on other sites More sharing options...
TZero Posted July 13, 2017 Report Share Posted July 13, 2017 What controls came with them? 1) 2) If you bought the 2nd controller, you must: Choose TAB 2 in the software ThermalMike 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.