Jump to content
Dsurian

Core P1 Build; Help?

Recommended Posts

Greetings all; working on a mini-ITX build, featuring some ThermalTake tech, and hit a few snags ...was hoping you all could assist.P1CoreBuild-01.thumb.png.5a2cab59eeaaa4dedf118766f5a096b1.png
Components List:

Intel i7-7700K
ASUS Z270i mini-ITX
G-Skill TridentZ RGB 2x16GB3600
Samsung 960 Pro M.2 512GB
ASUS Poseidon GTX 1080 Ti
ThermalTake Core P1
ThermalTake Toughpower iRGB Plus 850W
ThermalTake Floe TT Premium 240mm

So, I got most everything hooked up, but haven't even bothered with the GPU until I have all the wiring figured out ...and that's the problem.
Regarding the Radiator/Heatsink; the data(?) cable for the lighting controller has three connectors:

  1. Two connectors are USB Micro-B's; one for the controller, and the other to go ...where? - into a hypothetical second controller?
  2. The other connector is a female 9-pin, with a blocked top-right/bottom-left, presumably for the motherboard ...except the ASUS Z270i doesn't appear to have an appropriate header. Closest thing I could find was an 'RGB_Header' male 4-pin, which seems to be specifically for light strips.P1CoreBuild-02.png.6faf29dc14521af8f2f84ae59dea755a.png

Regarding the PSU:

  1. Again, has a USB Mini-B(?) connector, with a female 9-pin on the end, presumably for the motherboard, yet no appropriate header seems viable.

General queries:

  1. Any chance all the RGB stuff can sync up? - between the ThermaleTake PSU, x2 Fans, and Pump ...and the ASUS Sync mobo, GPU, and RAM.
  2. I put the radiator dead-center in the available bay; any preferences regarding position? - all the way to the top? - all the way to the bottom? - water lines coming from the bottom? - etc.
  3. Is there even a difference between the stock Riser Cable I got with the P1 case and the 'TT Gaming' PCI-E Extender? - how could I tell the difference between the two? - if there is a difference, why was the P1 even shipped with the 'practically useless' one?!?

...at the end of the day, really just curious at-the-moment regarding the female 9-pins relating to the Controller and PSU, which ThermalTake seemed to assume I would understand and that my motherboard would have, while TT pointedly didn't explain and my mobo doesn't appear to have. Any alternatives? - can they operate without? - if they're that important, why were they practically ignored in all the documentation?

Share this post


Link to post
Share on other sites

this female 9-pin connector is a ubs 2.0 header for your mobo. are you really sure you dont even have a single one of them on your mobo? 

My corsair PSU also has s mini-usb port to an internal usb 2.0 connection. in my case its for reading out stats like fan-speed, power draw and so on. in your case it could also be for sync the rbg 

 

as far as i  can see you have already populatet the usb2.0 header for your front IO(beneath the white 4-pin RGB header) now you have to decide whats more important, the front usb or the stats and possibly the syn of the LED's 

 

maybe consider taking a look in the manuals what they are for.

 

and i guess you should be able to sync all TT parts up. but i cant tell you if you need TT software or just asus aura....

 

i hope it helps a little bit :)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...