Jump to content
martynpd

Change request - Riing RGB Plus software 1.1.6 cpu temp

Recommended Posts

ThermalTake

Currently incase customers didn't know, the Riing Plus software looks at the system temperatures for it's PWM feature of it's fans and it looks like it takes an average and uses that for it's PWM feature

Therefore clearly they only intended them to be used for case fans rather than CPU cooling fans on Radiators or heatpipe blocks

Annoyingly there the best fans on the market and consumers are not aware of this when making their purchase, for me personally i based it on the fans trait on high static pressure which are used for radiators.

My case will never reach 50c inside the case, it's an open case for a start, my gpu and cpu are on water my computer room is 21c or less in the UK currently as it's winter

Please ThermalTake 

Either change your software so we get the option of using the CPU temperature for your fans, or edit the HWiNFO32.dll to point at the CPU temp only.

my cpu is sitting at 30ish c at idle but your software thinks the system is at 48c when i just turned the computer on and haven't done anything intensive.

It's just annoying because the fans spin up when it gets to 50c without the cpu even having to work hard at all. I'm sure other customers will back me up and  agree that case fans are usually set at a static rpm range, 

my setup uses 2 360 rads with 6 of these fans on them and they do get loud for no reason, i cant turn them down because i want my cpu and gpu to use PWM fans as their attached to the raditors

Thanks a  lot  rant over

here is the hardware monitor

 

------------HWi32_GetSensorName:System: GIGABYTE Z370 AORUS Gaming 7 = 8.48798e-314----------------------

------------HWi32_GetSensorName:CPU [#0]: Intel Core-4800 = 0----------------------

HWi32_GetVoltage:Core #0 VID = 1.30457

HWi32_GetClock:Core #0 Clock = 4800

HWi32_GetUsage:Core #0 Thread #0 Usage = 6.4

HWi32_GetVoltage:Core #1 VID = 0.662598

HWi32_GetClock:Core #1 Clock = 800

HWi32_GetUsage:Core #0 Thread #1 Usage = 0.4

HWi32_GetVoltage:Core #2 VID = 1.26111

HWi32_GetClock:Core #2 Clock = 4800

HWi32_GetUsage:Core #1 Thread #0 Usage = 0.8

HWi32_GetVoltage:Core #3 VID = 1.27209

HWi32_GetClock:Core #3 Clock = 4800

HWi32_GetVoltage:Core #4 VID = 1.27942

HWi32_GetClock:Core #4 Clock = 4800

HWi32_GetUsage:Core #2 Thread #0 Usage = 1.2

HWi32_GetVoltage:Core #5 VID = 1.22571

HWi32_GetClock:Core #5 Clock = 4800

HWi32_GetClock:Bus Clock = 100

HWi32_GetUsage:Core #3 Thread #0 Usage = 4.3

HWi32_GetClock:Ring Clock = 3700

HWi32_GetUsage:Core #4 Thread #0 Usage = 0.8

HWi32_GetUsage:Core #4 Thread #1 Usage = 0.8

HWi32_GetUsage:Core #5 Thread #0 Usage = 0.4

HWi32_GetUsage:Core #5 Thread #1 Usage = 0.4

HWi32_GetUsage:Max CPU/Thread Usage = 6.4

HWi32_GetUsage:Total CPU Usage = 1.29167

HWi32_GetUsage:On-Demand Clock Modulation = 100

------------HWi32_GetSensorName:CPU [#0]: Intel Core-4800: DTS = 0----------------------

HWi32_GetTemperature:Core #0 = 32

HWi32_GetTemperature:Core #1 = 35

HWi32_GetTemperature:Core #2 = 32

HWi32_GetTemperature:Core #3 = 32

HWi32_GetTemperature:Core #4 = 33

HWi32_GetTemperature:Core #5 = 32

HWi32_GetTemperature:Core #0 Distance to TjMAX = 68

HWi32_GetTemperature:Core #1 Distance to TjMAX = 65

HWi32_GetTemperature:Core #2 Distance to TjMAX = 68

HWi32_GetTemperature:Core #3 Distance to TjMAX = 68

HWi32_GetTemperature:Core #4 Distance to TjMAX = 67

HWi32_GetTemperature:Core #5 Distance to TjMAX = 68

------------HWi32_GetSensorName:CPU [#0]: Intel Core-4800 = 0----------------------

HWi32_GetPower:CPU Package Power = 10.3531

HWi32_GetPower:IA Cores Power = 6.8651

------------HWi32_GetSensorName:Memory Timings = 0----------------------

------------HWi32_GetSensorName:CPU [#0]: Intel Core-4800: Performance Limit Reasons = 0----------------------

------------HWi32_GetSensorName:GIGABYTE Z370 AORUS Gaming 7 (SiS 950/ITE IT8705F) = 0----------------------

HWi32_GetTemperature:Temperature 1 = 39

HWi32_GetVoltage:Vccp1 = 1.744

HWi32_GetFan:Chassis = 168750

HWi32_GetTemperature:Temperature 2 = 47

HWi32_GetVoltage:Vccp2 = 2.704

HWi32_GetTemperature:Temperature 3 = 24

HWi32_GetVoltage:+3.3V = 2.704

HWi32_GetVoltage:+5V = 4.54272

HWi32_GetVoltage:-12V = -5.63014

HWi32_GetVoltage:-5V = -2.712

HWi32_GetVoltage:5VSB = 3.81696

HWi32_GetVoltage:VBAT = 2.128

------------HWi32_GetSensorName:GIGABYTE Z370 AORUS Gaming 7 (ITE IT8733) = 0----------------------

HWi32_GetTemperature:Temperature 1 = 36

HWi32_GetVoltage:Vcore = 0.7194

HWi32_GetVoltage:Vccp2 = 0.6649

HWi32_GetTemperature:Temperature 3 = 34

HWi32_GetVoltage:+3.3V = 1.0355

HWi32_GetVoltage:AVCC3 = 3.379

HWi32_GetVoltage:+12V = 4.7088

HWi32_GetVoltage:VIN5 = 1.5151

HWi32_GetVoltage:3VSB = 3.3572

HWi32_GetVoltage:VBAT = 3.27

------------HWi32_GetSensorName:S.M.A.R.T.: SanDisk SDSSDHII960G (155000402147) = 0----------------------

HWi32_GetTemperature:Drive Temperature = 30

HWi32_GetUsage:Drive Remaining Life = 100

------------HWi32_GetSensorName:S.M.A.R.T.: WDC WD2002FAEX-007BA0 (WD-WMAY03613367) = 0----------------------

HWi32_GetTemperature:Drive Temperature = 34

------------HWi32_GetSensorName:S.M.A.R.T.: Samsung SSD 960 PRO 512GB (S3EWNWAJ401017J) = 0----------------------

HWi32_GetTemperature:Drive Temperature = 43

HWi32_GetUsage:Drive Remaining Life = 99

------------HWi32_GetSensorName:Drive: SanDisk SDSSDHII960G = 0----------------------

------------HWi32_GetSensorName:Drive: WDC WD2002FAEX-007BA0 = 0----------------------

------------HWi32_GetSensorName:Drive: Samsung SSD 960 PRO 512GB = 0----------------------

HWi32_GetUsage:Read Activity = 0.028

HWi32_GetUsage:Write Activity = 0.199

HWi32_GetUsage:Total Activity = 0.227

------------HWi32_GetSensorName:GPU [#0]: NVIDIA GeForce GTX TITAN X: = 0----------------------

HWi32_GetTemperature:GPU Temperature = 31

HWi32_GetVoltage:GPU Core Voltage = 1.043

HWi32_GetClock:GPU Clock = 810.316

HWi32_GetUsage:GPU Core Load = 1

HWi32_GetUsage:GPU Memory Controller Load = 1

HWi32_GetTemperature:GPU Temperature (HW) = 31

HWi32_GetClock:GPU Memory Clock = 1752.75

HWi32_GetClock:GPU Video Clock = 746.052

HWi32_GetUsage:GPU Memory Usage = 3.21684

HWi32_GetUsage:GPU D3D Usage = 0.210234

------------HWi32_GetSensorName:Network: Intel Ethernet Connection I219-V = 8----------------------

------------HWi32_GetSensorName:Network: Qualcomm/Atheros, Device ID: E0B1 = 0----------------------

------------HWi32_GetSensorName:Windows Hardware Errors (WHEA) = 0----------------------

tt.PNG

Share this post


Link to post
Share on other sites

Hello,

First off, thanks for the feedback, we are also working on "more tools" for users to have available so look forward to that.

The Riing Plus software also has a "Silent" mode, which you can use as well with or without PWM control if the noise is a concern.

Personally I run these fans in my dual radiator setup and I am as close to ambient as I could be.

We understand users want more, it just takes time :) Stay tubed!

Share this post


Link to post
Share on other sites

Any updates on this?

My water cooler is only cooling the CPU so It would be nice have TT RGB Pluss read the CPU temperature only or have an option to change what it is monitoring.

Is there any other way to do this? 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...