Jump to content

Recommended Posts

This is the start of the final TT front logo and surround, this time the height is slightly less, higher pattern will be added to this and I have made the TT separate from the main backing, this is to help make sanding and painting a bit more easy.
 

20180811_152243.thumb.jpg.fdc287fc3375f7a7c3e60839bacd6340.jpg



Also added my Deblow logo within the TT logo.

20180811_192734.thumb.jpg.c42bacf2c960f595aa2aeda9b9c953e4.jpg

 

20180813_092323.thumb.jpg.8443f06b4c4fb601134db95a3cdaed64.jpg

 

20180813_093745.thumb.jpg.39182e3e3845a087debf0dde00b03c71.jpg

 

Share this post


Link to post
Share on other sites

 

With the fans fitted I started designing the covers, 4 for the front and 3 in the back.
All designed from scratch and 3D printed then painted, two different styles used.

For the back ones I went with a claw type with all the main front of the fan left exposed for maximum air and RGB goodness :)

For the front fans as they was facing with the back showing I decided to cover all the wire and original plastic with new covers.

 

 

20180811_222057.thumb.jpg.0a141b971b91bc23303e1336e75018fd.jpg806818983_bandicam2018-08-1319-18-30-615.thumb.jpg.174d0ed7603b26810ae269a4b6aadf3f.jpg1093339179_bandicam2018-08-1319-02-42-723.thumb.jpg.f7ca0348e154fb6e65a7b2cb2801e71f.jpg20180811_223205.thumb.jpg.7da3565cf0839ec794907024cc2b9ecf.jpg

 

 

Share this post


Link to post
Share on other sites

Now back to the main feature for this build, with this being the first time I've attempted to do something like this as part of a pc mod I needed to learn as
progressed from step to step, I also wanted to make the clay stronger so I experimented with resin, couldn't find anyone thats done this before so I
was glad to see it went to plan.

The panther is very strong now and its a good job too, several very heavy rolls cinema posters feel from the roof rack and landed on it.
luck for me the only real damage was to the tale and was't hard to fix.

c1.thumb.jpg.cd2e0e8b6dd20e08dc7d913e24d8f7b5.jpgc3.thumb.jpg.e5d8b91a9ba6180b8aadf248345e6657.jpg

c4.thumb.jpg.a8add4c2b5291cd067548db4db954938.jpg

c2.thumb.jpg.7e8022adb3bd79851b6b03756171990b.jpg

20180718_204440.thumb.jpg.2479d0fe3797e14ba1bdf42dddf2d7b7.jpg

 

20180720_171220.thumb.jpg.e866160c04f11da2bd40c5e0df13329e.jpg

 

So after filling and sanding out all the cracks I did the resin, primer one last time and other sanding and then I painted it matt, gloss, and satin black
so I could decide what a like best.
ended up going with textured rubber paint.

All thats needed now is the fine details painting, this will be shown in the final photos later this week

 

20180724_195811.thumb.jpg.4a50b1fbd50269ec060e8776e40ccad9.jpg


20180729_213831.thumb.jpg.c02360253294a88cf65d83ed823e0d77.jpg
20180729_213836.thumb.jpg.ee451e584b890e4317e7f098bc101557.jpg

 

Share this post


Link to post
Share on other sites

I've also used "Wakandan"  Proper name Xhosa/Swahili text in a couple of places.
On the reservoirs and the customised 360 RGB panels mean for the side of the Rads.

Firstly the reservoirs, again I used the design and patterns I did at the start and slightly changed them to fit the tank along with the added text.
Can you guess what the text says? :)

20180729_225718.thumb.jpg.768438e299fa3539bf6c411f4e586b00.jpg

20180729_225842.thumb.jpg.068a7a599fa689e63168e0ac6a29329e.jpg

 

first test run with some clear water, Light set to RGB full rainbow mode at stock until you program them.

20180816_221132.thumb.jpg.5f2620a505a882802d3686de4576d848.jpg

 

Share this post


Link to post
Share on other sites

 

The main sponsors panel in progress, this along with every other panel including the fan covers are all magnetic so can be removed easy and swapped around from side to side.

20180820_200927.thumb.jpg.87f39bb540ce1b4f824eae54b11892db.jpg

 

MB Back cover.

20180821_215156.thumb.jpg.d8c9fdb07ba9ad18d61480a49abfcc23.jpg

20180821_225311.thumb.jpg.111bb37e26173df4a16881a121e1fcaa.jpg

20180908_193107.thumb.jpg.8a5b495bf11ce15fe25f0b4b94acc859.jpg

 

I was sent the normal W4 waterblock for the CPU that I fitted and modded, then discovered they should have sent the Plus version as its a great improvement in control and also the brightness.
The only problem was that I had no time to mod this ones like I did the original, but it still looks great.


20180907_122317.thumb.jpg.257e5de953421710cf82f0ceef83aee8.jpg

20180907_121040.thumb.jpg.eb942b2c5c88a317dd1c790727593235.jpg

20180907_125432.thumb.jpg.4e4baa6690b01dd98cfecaeb9c85db3a.jpg

20180907_122302.thumb.jpg.85387822c0dc598d2fd3ad2f30a47b5a.jpg

 

 

 

This is the front panel with some airbrushing to assist with the lighting.

20180908_213610.jpg

Share this post


Link to post
Share on other sites

After what feels like forever! the Panther build is complete!

Had some great fun learning new techniques, 3D design, clay and printing along with new cool ways to use the RGB lighting.

The mod is following in my main style, black is always a great personal chose for myself and I like to try keep the case
mods resembling the original case as much I can so this was a tricky one to plan
with all the glass and the fact that its one of the main features I needed, wanted to keep it all and work with it.

So on the front I used the glass to make a light up panther face using paints and RGB plus strips.
I tried 3 different designs for the text and pattern on the front and went with the one that was the least in your face to try
keep it clean.
For the right side/back, i wanted to be able to use the advantage of glass to be able to see though the case from both sides,
so I didn't paint it like I would normally, I made some 3D printed props to help give some depth and I cut the motherboard tray in half and positioned the motherboard hanging with the main rear ports facing down and central.
all the wires were then hidden with custom made covers, plastic, carbon and leather.

For the top, and very easy to spot and was the one thing i spent the most time on, the build log would give you a idea of the time
spent on the clay sculpted panther but it was far longer in reality lol.

I went a step further with the clay to help make it more part of the case, adding lights to the eyes that's controlled via Thermaltakes RGB controller gives me lots of options for the lighting.
the panther can be positioned facing any direction and has a leather base.

On the inside is where I did most of the other modding parts, first changing the RAD layout by making new mounts and removing the old ones, the PSU remains in the same place but a custom cover was made to hold the pumps and I also made some 3D patterns in clear PLA that I then spent hours gluing in place and also wrapping the other parts to block the light.

I didn't have RGB reservoirs so I made my own, this is something i have been doing for 5 years now so its become very normal for me.
Lighting was fun to play with and so were the fan covers, like the side covers all the fan covers are magnetic so I can swap them about from side to side and also do the same with the side covers.

I always try do something new, something I've not attempted before so I'm happy this all went to plan even with the delays along the way.

Good luck to all the other modders, from what I've seen so far its going to be a hard one to judge!


Rob "deblow" Deluce


 

p3.jpg

sb3.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...