-
Forum Statistics
8k
Total Topics53k
Total Posts -
Member Statistics
136,364
Total Members16,800
Most Online
kewlmunky
-
Posts
166 -
Joined
-
Last visited
-
Days Won
10
Content Type
Profiles
Forums
Downloads
Events
Gallery
Blogs
Posts posted by kewlmunky
-
-
Video of the finished product?
-
The Riing Plus fans have a single light ring, consisting of 12 addressable RGB lights, around the perimeter of the fan blades.
The Riing Trio fans have three light rings: one ring inside the fan blade hub that has 6 addressable RGB lights, a ring on the front of the fan that goes around the perimeter of the fan blades that has 12 addressable RGB lights, and another ring on the back side of the fan that has 12 addressable RGB lights. This totals you 30 addressable RGB lights on the Riing Trio fans. The Riing Trio fans may also have better performance ratings, but I haven't looked at that too closely.
As far as their appearance; I don't own them Trio fans, so I can't accurately comment. I know that the product images for the RGB fans always look different than what I see in videos from consumers on youtube. I would say that what people capture in videos is closer than the product images you see.
-
I tried playing around with it and it seems the minimum you can set the fans to is ~500RPM in the software. I tried setting them to silent with the percent slider at 0%. Also turned off the port on the controller in the software. The fan kept spinning.
-
Have you checked to see if the pump RPM changes as your CPU temperature increases? They may have the pump run at lower speed with cooler temperatures.
-
It appears they removed Sound 1 and 2 and renamed sound 3 to Party mode. Then added game and movie mode, which are designed to have the fan colors react to the colors of the game and movie playing, respectively.
-
The Lumi color strips run off a 12V header, and thus are considered analog. This means they are not individually addressable like the Riing Plus fans, which are considered digital.
So while you can have both installed and operating, you will need to use the included controller for the lumi color strips, which will limit which lighting settings you can use to match your fans to them.
Thermaltake does sell Lumi Pacific Plus strips that come in a 3 pack and the same 5 port controller as your Riing Plus fans, but they are rather expensive.
-
14 hours ago, Bioacid said:
So running into the same issue. But in my case, this software want to run as an admin with elevation. I do not use the admin account unless I have too, I run a user account most of the time.
So I can run the software, get prompted for admin creds, it starts, reset all my settings and let it run. every time I reboot or log off I have rinse and repeat. To make things worse, now that they have added sync with Razer Chroma, and I love the effects, but the software keeps reverting back to default, once I click the connect to Chroma, everything works again. Cant they just make software that does not require elevation?
I am finding that in the whole world of computer support, its non existent. hardware, software, and its with all brands. seems they come out with something cool, and then do not support it.
For the software to not need elevation they would have to disable it from monitoring your CPU temperature and you would also not be able to use the game, party, and movie lighting effects. I'm sure a lot of people would like that as an option, but that would require more features for them to produce. Which we have seen is a long, slow, and painful process for them.
-
Have you tried plugging in just the controller that came with the 140mm fans? You may have a bad controller.
-
They've mentioned a whole new software a few times. I'm hoping they add the option to create device groups and then one can set lighting effects and fan speeds based on groups, else devices not in groups remain at their individual settings. It would be helpful to people with lots of devices.
-
That I cannot answer, as I have not seen anyone try to use multiple controllers and multiple headers.
@ThermalMike can hopefully answer this for you.
-
They used to have the following modes: sound1, sound2, and sound3. I believe around version 1.2.5 they got rid of sound1 and sound2 and renamed sound3 to party mode. Party mode should react to your music. Gaming mode is supposed to have the fans change color depending on what colors show up in your game. I haven't tested out movie mode, but it probably does the same as game mode but for movies.
-
It is not possible to chain the included controller with the TT Sync Premium Controller.
-
I've heard them mention a few times they have a completely new software in the works. I hope it is almost done.
It would be nice if one could put fans into groups, and then one sets the lights and speed for each group.
-
If you have a motherboard manual, double check it for the listing of a USB 2.0 header. If it was a prebuilt computer, contact customer service of the company you purchased it for. If you truly do not have the header, you will need to look for an expansion card to give you one.
The only other way to control the fans would be with the TT Sync controller that runs the fans via BIOS and the LEDs through motherboard software by connection of a 5V RGB header.
-
Maybe you only have one USB 2.0 header and it's being used by your front panel ports for your case? I'd be very surprised if you actually don't have the header.
If you don't have the header, you will need to find an expansion card to provide one. I briefly looked, but all I could find were cards to add USB 3.0 headers, so you may have a tough time finding them.
Without a USB 2.0 header, you will be unable to control the fans with Thermaltake's software.
-
You will still need to daisy chain the controllers so that they all show up in the software.
-
1. If you wish to use Asus Aura, you will need to purchase the TT Sync controller, which is a 9 port controller sold separately. This controller plugs in to a 5V addressable RGB header on the motherboard. I know ThermalMike mentioned the limitation of motherboard software with the number of addressable LEDs. I believe it's in the 200s, and if you had 9 Riing Trios hooked up you would be at 270 addressable LEDs.
2. There should not be a difference between using the Y splitter vs. the bridge cable. Both should provide the same functionality.
3. Whether you use the Y splitter or the bridge cable, each controller needs its own molex power.
-
Your controller is a five port one, correct? If so, it should connect to a 9 pin USB 2.0 header. I believe you two cables; a 9 pin usb 2.0 to micro usb and a 9 pin usb 2.0 Y cable that goes to two micro usb ends. The micro usb end should plug into your controller.
-
The controllers don't detect empty ports on their own. So your solution should be to simply set device 3 on controller 2 to not in use, and the warning should go away. Also change the other two from "Lumi Plus" to "Pure Plus" and you should be all set.
-
If it's already running in the taskbar and you run it from the start menu it probably just pulled up the instance already running. Did you try completely exiting out of the software and starting it up fresh just to make sure?
-
Maybe with two individual headers you will be fine, but I know they were not designed with the use case of having more than one hooked up to a PC. Try it with using both 5V headers and see what your results are.
-
I'm not sure when it was implemented, but at some point they changed the software so that when someone saves the settings of controller 1 using profile 1 the settings are also applied to other controllers. Try setting your first controller to a different profile.
-
You will be unable to use Thermaltake's software when using the TT Sync controller. Also, there is no official support for using two TT Sync controllers but someone figured out how to do it here (see post 13):
-
Did this happen after you put your computer to sleep? If so, you need to restart the software after waking your computer up.
TT V1.2.61, F 2.0.3 Losing setup after wake from Sleep
in Case Fan
Posted
Do you mean you reboot your computer to fix the issue? If so, what you actually (and sadly) need to do is restart the TT RGB Plus software. Thermaltake claims that due to how USB is initialized when coming out of sleep mode, the controller and software are unable to reinitialize properly. Hopefully they update the program to automatically restart when waking from sleep.
Thermaltake was also sending out cables for the controllers with some sort of resistor in them that was supposed to fix the issue. But I keep seeing complaints of this pop up so I'm not sure if they stopped it or if they no longer work. Shoot them an email requesting them and see what they can do.