Zagdima

I have same controller but 3 fans. All fans should work as you set in software. in my case...

I think same. it's for riing coolers the ones with 256 colors 5volts. The 1st ones not even premium.

You need to connect fans to motherboard if they 12volts. And use any software. I dont know about MSI boards but f.e. Asus have AIsuite which can controll speed of fans connected to motherboard. Use MSI software Dragon Center. It shpuld be able to controll speed of your fans if they conected to MB. ANd you can controll them from bios. READ Manual.

The last photo is for fan to motherboard for sure. But i think i know the problem. If you case was with 1 cooler at the back so you just need to connect it to the mainboard. If with 3 you need to connect to mainboard again each of them. At that time we need to understand which coolers you have single color/multicolour or even with addresable rgb color. Cause i find info that this case can come with single white-bluish color light 12v. which connected directlry to motherboard.

Header with 12v write on it. need photos of your device cables headers everything

Can you upload a pictures of the controller. And i think you controller is for fans and not can be controlled from software.

did you check this manual? https://thermaltake.azureedge.net/pub/media/productattach/c/a/ca-1i7-00f1wn-03_view_71_tg_argb___190503.pdf

DId you connect it to motherboard?

Can you check here?

You need to know what to do. You'd better Send message to me if you want to learn more. SO i dont want to have problems with thermaltake. I'm now creating youtube channel about fans profiles etc. i will upload profiles and how to connect etc... its called RGBfan...

You can buy fans. They are ok. But software and controllers maybe bad. So if you have fans working. just connect them to corsair controllers or any other.) Of course you need to know how to connect. But it is rather easy.

Привет. Решил проблему? Если нет попробуй проверить каналы, я имею ввиду там где 1-2-3 слои или как их. Вообщем которые отвечают за кольца наружное внутренне заднее... Если что пиши.

I didnt get it. Do you have cables for case leds and motherboard? all you need is to connect pins accordinly. Try to use MSI or ASUS cable they have VD_G pins as on your motherboard. so V-5V, D-Data, _ -empty pin, G-ground. Or make a photo of motherboard pins and controller pins. Also dont forget that you need to hold 3 secs for swithing to software control mode.

Are you sure your fans RGB not only white color? Cause there is a single color version. If you have rgb version, 3 second pressing will switch to software controlling mode. Just pressing buton should switch colors. (of course if you have RGB fans not single colour fans) which case you have? - this https://www.thermaltake.com/versa-j24-tempered-glass-argb-edition.html or this - https://www.thermaltake.com/versa-j24-tempered-glass-rgb-edition.html if second you need Asus aura software.

I dont have such problem. Try ro use only TT RGB to check working status of RGB fans. I have 4 dofferent controllers: 1 Thermaltake for Quad fans. 2. Corsair COammander Pro. 3 Corsaor Lighning node pro. 4. Aquasuite farbwerk nano. All of them have software and launching everytime with windows. Thermaltake soft can show audio effects aswell as corsair software and aquasuite software. Try to disable everything and start to check conrollers. From the begining. So i think problem not in fans or controllers itself. Because with so much software in my PC everything working.

It appeared that neon maker will support almost all products thermaltake have - all pictures from Neon maker folder

Can you show the example of jumping colour? My profiles works fine, As i created them on neon maker they work same on tt RGB.

Neon Maker... Supports Quad, Trio, and Floe DX RGB (which has 18 leds on cooler and 6 leds on other device pump etc.. them). SO if you dont have this devices profiles will work incorrectly. As far as i understand. Pure plus not supported. Try to choose smth close to you amount of leds. Maybe this will help you.

Try to disable all devices which using audio. F.e. i can see Blutooth device.

They recently change text on neonmaker page - its only support quad. TTplus working for me win 10. and they update neon maker to 1.0.1 version recently maybe try to update. iCue siftware good i have some devices like memory and fans. But it lacks some features. Which thermaltake has at least in ttplus. So i'm searching for software which could do everything i need and i didnt find. I also use aquasuite software with their nano controller it lacka custom features but it has nice music analyzer if you interested. And they hav different contollers and ambient mode.

Yea i see, but why they remove text from the page of neon maker.

They change Text. It now not supports only Riing Quad controller