Well, it's been awhile since I last posted and a lot happened. Sorry no pictures. I have to clean up the wiring etc before I show anyone.
I have the Core X9 with the following:
CPU: Intel 5960x OC to 4.4Ghz
MB: Asus ROG Rampage V Extreme
RAM: Corsair DDR4-2133 16G (4x4)
HDD: Samsung 850 EVO 500g (OS); WD Black 500g (data); WD Black 2TB (data)
VID: 2 Sapphire Tri-X OC R9 290s in CF
PSU: PC Power and Cooling 1200W Silencer III
Cooling: CPU - EK Supremecy EVO Acetal/copper block;
GPUS - EK acetal/copper full blocks (gpu and vram cooling);
Radiators - 2 - XSPC RX480 V3s and 1 EK Coolstream 480 PE (tons of coolings)
Reservoir/pump - XSPC Twin D5 bay res with 2 Swiftech D5-655s running in series.
Fans - 12 AP15 Gentle Typhoons mounted in push mode controlled by a 6 channel NZXT fan controller (2 fans per channel)
OS: Win 8.1-64
I mounted the two RX480 rads to the top and mounted the single EK 480 rad horizontally on the right side of the case looking at from the front. I used one of the HDD mounting brackets and centered it and mounted the EK rad to it.
On the left side from front to back I have the bay/res facing the left side and then the HDD cage holding the ssd and 2 HDDs followed by the PSU. It's a tight fit but works. I use only distilled water with a silver coil and two drops of biocide. The water flow is from the res/pumps to the EK 480 to the XSPC RX480s to the cpu then to the gpus and then back to the bay/res.
This case is AMAZING. A water coolers dream.