Rubix Posted April 17, 2020 Report Share Posted April 17, 2020 Added fan speed customization function. (Only supports specific digital PSUs). But i need a custom options. I want the fan to always run at 500 rpm. or start in passive mode with 50 degrees instead of 40. Because the fan at the start makes sounds that distract Quote Link to comment Share on other sites More sharing options...
Rubix Posted April 17, 2020 Author Report Share Posted April 17, 2020 You will never learn how to install good fan. In my old tt, I installed noctua the next day because your noise was like a vacuum cleaner. In Thermaltake, the Toughpower DPS RGB 850W Titanium [TSG-0850 D-T] rattles every time you start it in passive mode, and in silent 896 rpm it is very much and noisy. Sorry for my English Quote Link to comment Share on other sites More sharing options...
Rubix Posted April 18, 2020 Author Report Share Posted April 18, 2020 not show watts gtx760 Quote Link to comment Share on other sites More sharing options...
Rubix Posted April 19, 2020 Author Report Share Posted April 19, 2020 The first problem was solved by installing a fan in the housing. But now there was another problem. Why, when in passive mode, the load on the power supply is 35% or higher, the fan immediately turns on at 896 rpm? This is too much, why then passive when I can set silent, which is also 896 rpm. Quote Link to comment Share on other sites More sharing options...
Rubix Posted April 19, 2020 Author Report Share Posted April 19, 2020 In General, everything is very poorly thought out, you need to fire your engineers. Of the 3 modes, not one is good. 1. Silent(896 rpm) it is very noisy. 2. Max rpm is the turbine of the plane. 3. Passive, this is the stove for my video card, when the power supply stands fan in the case, and when the fan does not suck out hot air, it goes up. Need 4 mode starting from 100 rpm and ending with 1500 at 100% load on the unit. Load 20% = 100 rpm 25%-200 30%-300 35%-400, 40%-500, 45%-600, 50%-700, 55%-800, 60%-900 70%-1000, 75%-1100, 80%-1200, 85%-1300, 90%-1400, 95%-100% maximum. Quote Link to comment Share on other sites More sharing options...
TT0987 Posted April 20, 2020 Report Share Posted April 20, 2020 Hi Rubix Sounds like you want more control over fan RPM here. However, due to safety reason, we can't let users take control over PSU hardware protections, such as OCP, OTP, and etc... Therefore, set RPM at 500 as you mentioned is not possible. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.