iocgbht Posted January 8 Report Share Posted January 8 I keep getting issues with the RGB on these fans. I got 3 of them setup with the magnetic connection and one of them connected to a controller connected to USB 2 port, molex and the controller is connected with the sync port to another controller controlling a TT DS100 distro plate Everytime I turn on my PC I need to open the TT RGB plus to load the RGB configuration of both fans and distro plate. This works but it is pretty annotying to do this every time manually after turning my PC on. For some reason, after some variable time (between 1 and 2 hours), the 3 fans RGBs return to the "stock" colors (i.e. the rainbow color that slowly cycles thrugh the fans). If I open the TT RGB plus again I cannot change the colors back and I need to restart my computer to do this. Any idea of why this is happening and how to fix it? Any help is highly appreciated. Quote Link to comment Share on other sites More sharing options...
spens Posted January 10 Report Share Posted January 10 I have the same problem with my Floe Riing 240 Premium + controller included to the box. After I turn on PC it autolaunch TT RGB Plus and my color settings apply. It works fine until I launch any steam game. Shortly after game launched fans and pump return to default rainbow mode and I can't change anything without restarting TT RGB Plus, after restart I see my colors again for a few minutes and then rainbow again. Quote Link to comment Share on other sites More sharing options...
Tony.P Posted January 12 Report Share Posted January 12 On 1/8/2024 at 11:07 AM, iocgbht said: I keep getting issues with the RGB on these fans. I got 3 of them setup with the magnetic connection and one of them connected to a controller connected to USB 2 port, molex and the controller is connected with the sync port to another controller controlling a TT DS100 distro plate Everytime I turn on my PC I need to open the TT RGB plus to load the RGB configuration of both fans and distro plate. This works but it is pretty annotying to do this every time manually after turning my PC on. For some reason, after some variable time (between 1 and 2 hours), the 3 fans RGBs return to the "stock" colors (i.e. the rainbow color that slowly cycles thrugh the fans). If I open the TT RGB plus again I cannot change the colors back and I need to restart my computer to do this. Any idea of why this is happening and how to fix it? Any help is highly appreciated. Dear locgbht TT RGB PLUS did not support DS 100. https://tw.thermaltake.com/argent-ds-100-desk-cooler.html What RGB products did you purchase? Please provide the log file of the software by following the steps outlined in the attachment below. This will allow our team to review your problem. https://www.dropbox.com/scl/fi/dx1cpie321uiqgforn2re/TT-RGB-PLUS-Debug-Mode.docx?rlkey=nxinti87oo7fma4hj27jsxuip&dl=0 Quote Link to comment Share on other sites More sharing options...
Tony.P Posted January 12 Report Share Posted January 12 On 1/10/2024 at 5:51 PM, spens said: I have the same problem with my Floe Riing 240 Premium + controller included to the box. After I turn on PC it autolaunch TT RGB Plus and my color settings apply. It works fine until I launch any steam game. Shortly after game launched fans and pump return to default rainbow mode and I can't change anything without restarting TT RGB Plus, after restart I see my colors again for a few minutes and then rainbow again. Dear spens Please provide the log file of the software by following the steps outlined in the attachment below. This will allow our team to review your problem. https://www.dropbox.com/scl/fi/dx1cpie321uiqgforn2re/TT-RGB-PLUS-Debug-Mode.docx?rlkey=nxinti87oo7fma4hj27jsxuip&dl=0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.