Jump to content
Phils Pc Mods and News

First Sponsored build log "Phils PC Mods and News"

Recommended Posts


Welcome everyone

 
I will be working with a couple sponsors to do a build for the Define S Modding Series, I will be posting a lot of photos and ill try and be very active during this work log.
 
 
CURRENT SPONSORS..
 
 
YK2ABs4.png
 
 
T0qOZvc.png
 
 
800px-Gigabyte_logo.svg.png
 
 
22B9sNR.png
 
 
vbivBAe.png
 
Components:
 
CPU: Intel Core i5 6600K
Motherboard: Gigabyte GA-Z170X-Gaming GT
RAM: KLEVV CRAS DDR4 32GB
SSD #1: KLEVV URBANE 240GB
SSD #2: KLEVV URBANE 480GB
GPU #1: GIGABYTE 760 4GB edition 
PSU: Fractal Design Edison M 650 Watts 
Case: fractal Design Define S
 
 
Water Cooling items:
 
Fans:
 
3x Venturi HP-12 PWM 
3 Pack RGB 120mm fan with controller
 
Radiators:
 
2x Pacific R360 Radiators
 
Pump and Res:
 
1x Pacific P1 Black D5 silent kit
1x Pacific PT40-D5 silent kit reservoir/pump combo
1x Pacific T22 Reservoir 
 
Water Blocks:
 
1x Pacific W2 cpu water block
 
Fittings:
 
3x Pacific G1/4 45&90 degree adaptor “blackâ€
12x Pacific G1/4 90 degree adaptor “blackâ€
4x Pacific G1/4 stop plug w/o-ring “blackâ€
6x Pacific G1/4 45 degree adaptor “blackâ€
14x Pacific G1/4 Push-in hardline fittings 16mm “black"
2x pacific G1/4 Y adaptor “black 
2x Pacific G1/4 connector Block “black†
 
Tubing "for test fitting":
 
4x V-tubler PETG Tube 5/8 (16mm) OD 500mm 4 Pack
 
 
 
 
 
 

Facebook: Phils PC Mods and News

 

Share this post


Link to post
Share on other sites

Hi everyone, here is a quick update on what i have done today.

 
 
So i decided to cut up the front panel of the fractal define S :-)
 
gMDWG2g.jpg
hOmZlII.jpg
wIuBHrJ.jpg
1jp5RO0.jpg
TqsoUcc.jpg
 
Here is a nice photo frame :-) 
kCEkDVJ.jpg
70uUDnc.jpg
h7aR8uP.jpg
Z9IJ39L.jpg
xtQ5S4o.jpg
8aJ6VP0.jpg
2jcSX3E.jpg
 
Now im going to share my thoughts on what i am going to do with this, i was thinking of using some white perspex to cover the front hole that i have created today. once i do that i would like to add some Thermaltake blue led  ring fans on the inside of the front panel where i will mount the radiator.
 
nl7bm5J.jpg
 
now im hoping that this will give a nice blue glow through the white perspex :-) please let me know your thoughts on this mod!
 
ill be back :-)
 

Share this post


Link to post
Share on other sites

Here is a quick update on how the KLEVV Cras DDR4 looks like when its in a system.

 
lzYTb6g.jpg
 
ZlxYPPQ.jpg
 
fQ3tPTT.png
 
These KLEVV cras memory modules are all metal construction, and huge. I would defiantly say that these are some of the best modules on the market up their with the big brands such as Corsair Dominator Platinum's.

 

 

Share this post


Link to post
Share on other sites

I have some awesome SSDs to show you all.

 
PJWuOi2.jpg
 
sHC8cso.jpg
 
S90hDtS.jpg
 
9Az6eyi.jpg
 
Here is a quick speed comparison
 
b9RgFOd.png
 
Here are the links for the product specifications
 
 
 
 

Share this post


Link to post
Share on other sites

A big shout out to Thermaltake for supporting this build. They hooked me up with some great water cooling products and i could not have done this with out them. here are a couple photos of what they sent over.

 

 

0RX8w8G.jpg

 

Y1NXgGR.jpg

 

PVGv4tq.jpg

 

UrnhJ7a.jpg

 

C5BPlP4.jpg

 

qsh4EaQ.jpg

 

kGQ8ETd.jpg

 

WkbPZ34.jpg

 

PQwjrO5.jpg

 

ELLvWA9.jpg

 

8YTTNuk.jpg

 

6Yo9hsR.jpg

 

TXFZNcb.jpg

 

9nM2MSi.jpg

 

0nQVraK.jpg

 

Facebook: Phils PC Mods and News

Share this post


Link to post
Share on other sites

Ok so today i started on cutting the PSU shroud to fit since the Pacific R360 radiator from Thermaltake is mounted on the inside of the case. 


 


WeUw72w.jpg


 


I68DTn5.jpg


 


 


I also cut a hole for the D5 pump to fall into since i needed room to access the top inlets on the Thermaltake res.


 


ywbfGOR.jpg 


 


After mounting the D5 pump and res into the PSU shroud i noticed it made the PSU shroud sag in that corner so i had to come up with a idea on how to support it. i used the current res mounts in the fractal design define S case to hold some little brackets i made from L shape aluminium.


 


9viC72N.jpg


 


They worked great and once i vinyl wrap the PSU cover you will not notice them at all. 


 


Facebook: Phils PC Mods and News


Share this post


Link to post
Share on other sites

I have an idea to mount the KLEVV ssds on top of the PSU shroud. I have cut the vinyl under where i would like to mount the ssds so i can create a cool lighting effect that will hopefully put a nice glow around the ssds. to help with this i have mounted the ssds on top of another clear piece of perspex.

 
 
YOoPwEp.jpg
 
IK9kpEe.jpg
 
9ZUyrZ9.jpg
 
JSYYDAc.jpg

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...