Jump to content
Sign in to follow this  
Boltzy

DPS G App Restricting CPU and Case Fans

Recommended Posts

Hey guys

 

I have recently purchased a Thermaltake 1250w 80+ Titanium RGB.  

 

I am experiencing an issue with the DPS app to control the fan RGB LED.  When its installed, the software seems to interfere with my fans in the system, especially my Corsair H115i CPU water cooler fans.

 

It restricts the RPM to 900 of all fans.  I know its the software as when i uninstall it they return to normal.  I want to install the software as I want to be able to control the LED lights in the fan.  

Any Advice?

 

 

Share this post


Link to post
Share on other sites

hi,

 

Did the software operate normally in your system, such as fan speed control and RGB lighting control?

we have tested the software with some of the motherboards and it doesn't interfere with the case fans.

Share this post


Link to post
Share on other sites

I assume you are talking about he DPS software, if so then Yes i was able to control the fan and RGB lighting on the PSU.  But as i mention for some reason Corsair Link (for H115i) and Asus AI Suite (for case fans etc) if i try to change the fan speeds it instantly gets reduced back down.

 

Is there any other way I can utilize the RBG without the DPS software?

 

PC Specs.

 

Asus Maximus IX Formula

i7-7700k - Corsair H115i cooler

Corsair Obsidian Series 750D Case

Share this post


Link to post
Share on other sites

After testing the AUSU AI Suite, i found the case fan control should not have the issue.

Test environment:

ASUS Maximus VIII Extreme

Windows 10 64bit

ASUS AI Suite 3 V1.01.3

DPS G PC App V 2.4.1

 

here is the photo with customized fan profile (fan speed at 528 rpm)

post-99237-0-96076900-1490345441_thumb.png

here is another photo with full speed on the case fan

post-99237-0-35435400-1490345453_thumb.png

 

The RGB lighting on the power supply has to be controlled by the PC app.

If the Corsair Link has the compatibility issue with DPS G software, i would like to suggest you to contact their customer service.

Share this post


Link to post
Share on other sites

The main issue I have is that the Corsair H115i will not let me control the fans for the Liquid cooler for the CPU as soon as i install DPS.

 

it allows me to select different fan speeds but then instantly restricts it.  As soon as I uninstall DPS i can alter the fan speeds again

Share this post


Link to post
Share on other sites

Hi,

 

if the DPS G PC App can operate normally (controlling the fan speed and lighting), we might not be able to fix the issue because of the compatibility problem on Corsair fans.

about the warning alert issue, i have also replied on another thread you posted.

i would like to ask you to confirm if the power supply connects to the motherboard without using USB hub?

if not, can you please swap with another USB port? 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...